Owner Lab
- CT HQ - Sacramento Structural Materials Testing Laboratory
DIME Sample ID 2019-10-22-1
Sample is locked from editing. info
Project Information
Project Identifiers | Project ID: 210569 DEA: 083555V4 EFIS: 0814000086 |
DIST-CO-RTE-PM | 08-SBD-15-42.5/46.0 |
Award Date | 11/05/2015 |
Closeout Date | 01/18/2022 |
Work Description | WIDEN I-15, RECONSTRUCT 3 IC'S, CONSTRUCT 2 NEW BR AND WIDEN 3 BR. |
Location Description | SAN BERNARDINO COUNTY IN VICTORVILLE FROM 0.5 MILE NORTH OF MOJAVE DRIVE TO 1.5 MILE NORTH OF STODDARD WELLS ROAD OVERCROSSING |
QA Service Level | 1 (Verified on 10/15/2015) |
Sample Information
Sample Taken Date | 10/22/2019 |
Sample Unique Key | 1 |
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 10/24/2019 |
Sample type | Quality Assurance |
A brief description of the sample | F3125 Grade F1852 1" x 3-3/4" Fastener |
The quantity of what the sample constitutes | 8 |
From where was the sample collected | Distributor |
First name of sampler or witnessed by | Arthur |
Last name of sampler or witnessed by | Peterson |
Title of sampler | QA Inspector |
Telephone number of sampler | 707-342-8602 |
Laboratory sample identification | |
Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Bristol Machine |
Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | L110-149-19 |
Structure unique identifier | |
Structure name | |
---|
Material Information
Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | Set No 31161 20642870 |
Heat Number(s) | 20642870 190609 X1449 |
Nut Mfg. Lot Number(s) | 31335-190609 |
Washer Mfg. Lot Number(s) | D7719 |
Bolt Specification | ASTM F3125 |
Bolt Length(s) | 3-3/4" |
Nut Specification | ASTM A563 |
Washer Specification | ASTM F436 |
Finish | Plain |
Diameter/Size | 1" |
Bolt Mfg. Lot Number | 31161-20642870 |
Rocap Test Requirement(s) | |
Lubricant Requirements(s) | |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
2019-10-22-1-1 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load) | spaine | CT HQ - Sacramento Structural Materials Testing Laboratory | 10/28/2019 | spaine | Yes | 10/29/2019 | Nut Proof Load | |
2019-10-22-1-2 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge) | spaine | CT HQ - Sacramento Structural Materials Testing Laboratory | 10/28/2019 | spaine | Yes | 10/29/2019 | A325TC Wedge Tensile | |
2019-10-22-1-3 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 10/28/2019 | Steven Paine | Yes | 10/29/2019 | | |
2019-10-22-1-4 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 10/28/2019 | Steven Paine | Yes | 10/29/2019 | | |
2019-10-22-1-5 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 10/28/2019 | Steven Paine | Yes | 10/29/2019 | | |
2019-10-22-1-6 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 10/28/2019 | Steven Paine | Yes | 10/29/2019 | | |
2019-10-22-1-7 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 10/28/2019 | Steven Paine | Yes | 10/29/2019 | | |
2019-10-22-1-8 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 10/28/2019 | Steven Paine | Yes | 10/29/2019 | | |
2019-10-22-1-9 | ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 10/28/2019 | Steven Paine | Yes | 10/29/2019 | | |
2019-10-22-1-10 | ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 10/28/2019 | Steven Paine | Yes | 10/29/2019 | | |
70650706517065270653706547065570656706577065870659