DIME - Sample Record for DIME Sample ID 2019-08-21-6

DIME » All Projects » Project - DEA: 044G8404 » Sample 2019-08-21-6 » Sample Details

Sample Record

Owner Lab

CT HQ - QASI Bay Area Field Office

DIME Sample ID 2019-08-21-6

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 212244 DEA: 044G8404 EFIS: 0413000051
DIST-CO-RTE-PM	04-NAP-128-20.1/20.4
Award Date	02/19/2019
Closeout Date	06/27/2023
Work Description	REPLACE CAPELL CREEK BRIDGE
Location Description	NAPA COUNTY ABOUT 15 MILES EAST OF RUTHERFORD FROM 1.1 MILES EAST OF KNOXVILLE ROAD TO 0.3 MILE WEST OF CAPELL VALLEY CREST
QA Service Level	1 (Verified on 05/20/2017)

Sample Information

Sample Taken Date	08/21/2019	Sample Unique Key	6
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	09/03/2019
Sample type	Department Acceptance	A brief description of the sample	A325 HDG bolt assemblies
The quantity of what the sample constitutes	3 ea assembly	From where was the sample collected	Fabricator
First name of sampler or witnessed by	Ryan	Last name of sampler or witnessed by	Parr
Title of sampler	Associate Steel Inspector	Telephone number of sampler	(510) 385-5910
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	Acrow Bridge	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form	B373-039-19	Structure unique identifier
Structure name	Cappell Creek Bridge

Material Information

Material Type	SMTL TM3 - Fastener Assembly	Rocap Number(s)
Heat Number(s)		Nut Mfg. Lot Number(s)
Washer Mfg. Lot Number(s)		Bolt Specification	A325
Bolt Length(s)		Nut Specification	A563
Washer Specification	F436	Finish	Hot Dipped Galvanized
Diameter/Size		Bolt Mfg. Lot Number
Rocap Test Requirement(s)		Lubricant Requirements(s)

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2019-08-21-6-1	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	spaine, CT HQ - Sacramento Structural Materials Testing Laboratory	09/04/2019	spaine	Yes	09/16/2019	A325 Wedge Tensile
2019-08-21-6-2	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	spaine, CT HQ - Sacramento Structural Materials Testing Laboratory	09/04/2019	spaine	Yes	09/16/2019	A325 Wedge Tensile
2019-08-21-6-3	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	spaine, CT HQ - Sacramento Structural Materials Testing Laboratory	09/04/2019	spaine	Yes	09/16/2019	A325 Wedge Tensile
2019-08-21-6-4	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	spaine, CT HQ - Sacramento Structural Materials Testing Laboratory	09/04/2019	spaine	Yes	09/16/2019	A325 Wedge Tensile
2019-08-21-6-5	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	spaine, CT HQ - Sacramento Structural Materials Testing Laboratory	09/04/2019	spaine	Yes	09/16/2019	Nut Proof Load
2019-08-21-6-6	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	spaine, CT HQ - Sacramento Structural Materials Testing Laboratory	09/04/2019	spaine	Yes	09/16/2019	Nut Proof Load
2019-08-21-6-7	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	spaine, CT HQ - Sacramento Structural Materials Testing Laboratory	09/04/2019	spaine	Yes	09/16/2019	Nut Proof Load
2019-08-21-6-8	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	spaine, CT HQ - Sacramento Structural Materials Testing Laboratory	09/04/2019	spaine	Yes	09/16/2019	Nut Proof Load
2019-08-21-6-9	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	spaine, CT HQ - Sacramento Structural Materials Testing Laboratory	09/05/2019	spaine	Yes	09/16/2019	Nut Proof Load
2019-08-21-6-10	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	spaine, CT HQ - Sacramento Structural Materials Testing Laboratory	09/05/2019	spaine	Yes	09/16/2019	Nut Proof Load

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2019-08-21-6-1 ASTM F606-14a (Verified)
DIME Test ID: 2019-08-21-6-2 ASTM F606-14a (Verified)
DIME Test ID: 2019-08-21-6-3 ASTM F606-14a (Verified)
DIME Test ID: 2019-08-21-6-4 ASTM F606-14a (Verified)
DIME Test ID: 2019-08-21-6-5 ASTM F606-14a (Verified)
DIME Test ID: 2019-08-21-6-6 ASTM F606-14a (Verified)
DIME Test ID: 2019-08-21-6-7 ASTM F606-14a (Verified)
DIME Test ID: 2019-08-21-6-8 ASTM F606-14a (Verified)
DIME Test ID: 2019-08-21-6-9 ASTM F606-14a (Verified)
DIME Test ID: 2019-08-21-6-10 ASTM F606-14a (Verified)
DIME Test ID: 2019-08-21-6-11 ASTM A370-15 (Verified)
DIME Test ID: 2019-08-21-6-12 ASTM A370-15 (Verified)
DIME Test ID: 2019-08-21-6-13 ASTM A370-15 (Verified)
DIME Test ID: 2019-08-21-6-14 ASTM A370-15 (Verified)
DIME Test ID: 2019-08-21-6-15 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-21-6-16 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-21-6-17 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-21-6-18 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-21-6-19 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-21-6-20 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-21-6-21 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-21-6-22 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-21-6-23 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-21-6-24 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-21-6-25 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-21-6-26 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-21-6-27 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-21-6-28 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-21-6-29 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-21-6-30 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-21-6-31 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-21-6-32 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-21-6-33 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-21-6-34 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-21-6-35 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-21-6-36 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-21-6-37 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-21-6-38 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-21-6-39 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-21-6-40 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-21-6-41 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-21-6-42 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-21-6-43 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-21-6-44 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-21-6-45 ASTM E18-15 (Verified)
DIME Test ID: 2019-08-21-6-46 ASTM E18-15 (Verified)
DIME Test ID: 2019-08-21-6-47 ASTM E18-15 (Verified)
DIME Test ID: 2019-08-21-6-48 ASTM E18-15 (Verified)
DIME Test ID: 2019-08-21-6-49 ASTM E18-15 (Verified)
DIME Test ID: 2019-08-21-6-50 ASTM E18-15 (Verified)
DIME Test ID: 2019-08-21-6-51 ASTM E18-15 (Verified)
DIME Test ID: 2019-08-21-6-52 ASTM E18-15 (Verified)
DIME Test ID: 2019-08-21-6-53 ASTM A370-15 (Verified)