Owner Lab
- CT HQ - Sacramento Aggregate Testing Laboratory
DIME Sample ID 2019-04-17-54
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 66667
DEA: JMFPP
EFIS: 0019000043 |
|---|
| DIST-CO-RTE-PM | 59--- |
|---|
| Award Date | Not set |
|---|
| Closeout Date | Not set |
|---|
| Work Description | Special project for submitting Sample information for JMF Prequalification Program. |
|---|
| Location Description | Not set |
|---|
| QA Service Level | NOT VERIFIED |
|---|
Sample Information
| Sample Taken Date | 04/17/2019 |
Sample Unique Key | 54 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 07/18/2019 |
|---|
| Sample type | Verification |
A brief description of the sample | 3/4" HMA - A |
|---|
| The quantity of what the sample constitutes | 1 |
From where was the sample collected | Source |
|---|
| First name of sampler or witnessed by | Iggy |
Last name of sampler or witnessed by | Herrera |
|---|
| Title of sampler | |
Telephone number of sampler | |
|---|
| Laboratory sample identification | 19-JMF-0118 replace with 19-JMF-0129 |
Linked DIME Sample ID | |
|---|
| The fabricator/manufacturer/facility name | Granite Construction Company Vernalis |
Transportation Laboratory (TL) Number | |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | |
|---|
| Structure name | |
|---|
Material Information
| Material Type | Aggregate |
Source Identification (SMARA or name of Pit) | 91-39-0002::VERNALIS |
|---|
| The fabricator's/manufacturer's product name for the sample | Unknown |
The fabricator/manufacturer designation for the sample | Unknown |
|---|
| The plant number | Unknown |
A detailed description of where the material sample was collected | Stockpile @ Plant |
|---|
| Where the material sample would have been placed if not sampled | Unknown |
Primary Aggregate Nominal Size | 3/4 inch |
|---|
| The concrete mix design number | Unknown |
Lot number | Unknown |
|---|
| Sublot number | Unknown |
JMF Verification ID | JMF3513-2019-76 |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2019-04-17-54-1 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Ryan Kester | CT HQ - Sacramento Aggregate Testing Laboratory | 08/19/2019 | Bang Nguyen | Yes | 08/30/2019 | |
|
| 2019-04-17-54-2 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Ryan Kester | CT HQ - Sacramento Aggregate Testing Laboratory | 08/19/2019 | Bang Nguyen | Yes | 08/30/2019 | |
|
| 2019-04-17-54-3 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Ryan Kester | CT HQ - Sacramento Aggregate Testing Laboratory | 08/19/2019 | Bang Nguyen | Yes | 08/30/2019 | |
|
| 2019-04-17-54-4 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Phil Montes | CT HQ - Sacramento Aggregate Testing Laboratory | 08/13/2019 | Bang Nguyen | Yes | 08/30/2019 | |
|
| 2019-04-17-54-5 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Phil Montes | CT HQ - Sacramento Aggregate Testing Laboratory | 08/14/2019 | Bang Nguyen | Yes | 08/30/2019 | |
|
| 2019-04-17-54-6 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Bang Nguyen | CT HQ - Sacramento Aggregate Testing Laboratory | 08/20/2019 | Bang Nguyen | Yes | 08/30/2019 | |
|
| 2019-04-17-54-7 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Ryan Kester | CT HQ - Sacramento Aggregate Testing Laboratory | 08/21/2019 | Bang Nguyen | Yes | 08/30/2019 | |
|
| 2019-04-17-54-8 | CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index) | Guadalupe Magana | CT HQ - Hot Mix Asphalt Laboratory | 08/15/2019 | Guadalupe Magana | Yes | 08/16/2019 | |
|
| 2019-04-17-54-9 | AASHTO T11-5: Standard Method of Test for Materials Finer Than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing | Bang Nguyen | CT HQ - Sacramento Aggregate Testing Laboratory | 08/06/2019 | Bang Nguyen | Yes | 08/30/2019 | |
|
| 2019-04-17-54-10 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Bang Nguyen | CT HQ - Sacramento Aggregate Testing Laboratory | 08/07/2019 | Bang Nguyen | Yes | 08/30/2019 | |
|
67132671336714667136671376713567139661546712967131
