Owner Lab
- CT - Southern Regional Laboratory
DIME Sample ID 2019-08-06-10
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 209694
DEA: 080J0704
EFIS: 0800000282 |
|---|
| DIST-CO-RTE-PM | 08-SBD-215-0.6/1.7 |
|---|
| Award Date | 10/17/2017 |
|---|
| Closeout Date | 04/23/2020 |
|---|
| Work Description | (Alternative Delivery) The CMGC project will reconstruct and improve interchange of I-215 and Barton Road in the City of Grand Terrace, CA. |
|---|
| Location Description | Grade separation at Intersection of I-215 and Barton Road near Grand Terrace, CA. ? On I-215 between I-10 and SR-60. |
|---|
| QA Service Level | 1 (Verified on 12/11/2017) |
|---|
Sample Information
| Sample Taken Date | 08/06/2019 |
Sample Unique Key | 10 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 08/07/2019 |
|---|
| Sample type | Verification |
A brief description of the sample | 3/4 HMA-A-SP R15 |
|---|
| The quantity of what the sample constitutes | PSE 5 bags |
From where was the sample collected | Manufacturer |
|---|
| First name of sampler or witnessed by | Vulcan Corona |
Last name of sampler or witnessed by | QC |
|---|
| Title of sampler | |
Telephone number of sampler | |
|---|
| Laboratory sample identification | 0470A-19 |
Linked DIME Sample ID | |
|---|
| The fabricator/manufacturer/facility name | Vulcan Corona, Pacific Clay Products |
Transportation Laboratory (TL) Number | |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | |
|---|
| Structure name | |
|---|
Material Information
| Material Type | Aggregate |
Source Identification (SMARA or name of Pit) | 91-33-0027::CORONA QUARRY |
|---|
| The fabricator's/manufacturer's product name for the sample | 3/4 HMA-A-SP R15 |
The fabricator/manufacturer designation for the sample | 224112 CORD SJR |
|---|
| The plant number | Unknown |
A detailed description of where the material sample was collected | Belt Cut at Vulcan Corona Plant |
|---|
| Where the material sample would have been placed if not sampled | Unknown |
Primary Aggregate Nominal Size | 3/4 inch |
|---|
| The concrete mix design number | Unknown |
Lot number | Unknown |
|---|
| Sublot number | Unknown |
JMF Verification ID | |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2019-08-06-10-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Edmond Jabbour | CT - Southern Regional Laboratory | 08/08/2019 | Michael Magana | Yes | 08/22/2019 | |
|
| 2019-08-06-10-2 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Satish Jain | CT - Southern Regional Laboratory | 08/13/2019 | Michael Magana | Yes | 08/22/2019 | |
|
| 2019-08-06-10-3 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Larry Diaz | CT - Southern Regional Laboratory | 08/09/2019 | Michael Magana | Yes | 08/22/2019 | |
|
| 2019-08-06-10-4 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Danilo Ferrer | CT - Southern Regional Laboratory | 08/09/2019 | Michael Magana | Yes | 08/22/2019 | |
|
| 2019-08-06-10-5 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Jose Guzman | CT - Southern Regional Laboratory | 08/10/2019 | Michael Magana | Yes | 08/22/2019 | |
|
| 2019-08-06-10-6 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Jose Guzman | CT - Southern Regional Laboratory | 08/09/2019 | Michael Magana | Yes | 08/22/2019 | |
|
| 2019-08-06-10-7 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Satish Jain | CT - Southern Regional Laboratory | 08/13/2019 | Michael Magana | Yes | 08/22/2019 | |
|
| 2019-08-06-10-8 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Satish Jain | CT - Southern Regional Laboratory | 08/14/2019 | Michael Magana | Yes | 08/22/2019 | |
|
| 2019-08-06-10-9 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Larry Diaz | CT - Southern Regional Laboratory | 08/12/2019 | Michael Magana | Yes | 08/22/2019 | RAP Gradation After Ignition Oven |
|
| 2019-08-06-10-10 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Larry Diaz | CT - Southern Regional Laboratory | 08/12/2019 | Michael Magana | Yes | 08/22/2019 | Combined Virgin/RAP Gradation w/Correlation Factors Applied |
|
66034660356603666037660386603966040660416604266043
