Owner Lab
- CT - Southern Regional Laboratory
DIME Sample ID 2019-07-20-3
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 209141
DEA: 07215954
EFIS: 0700001835 |
|---|
| DIST-CO-RTE-PM | 07-LA-5-0.0/7.6 |
|---|
| Award Date | 04/24/2014 |
|---|
| Closeout Date | Not set |
|---|
| Work Description | WIDENING FREEWAY AND RECONSTRUCT OVERHEAD AND OVERCROSSING STRUCTURES |
|---|
| Location Description | LOS ANGELES COUNTY IN LA MIRADA, SANTA FE SPRINGS, NORWALK AND DOWNEY FROM ORANGE COUNTY/LOS ANGELES COUNTY LIMIT LINES TO 0.7 MILE NORTH OF ROUTE 605 |
|---|
| QA Service Level | 1 (Verified on 06/02/2014) |
|---|
Sample Information
| Sample Taken Date | 07/20/2019 |
Sample Unique Key | 3 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 07/24/2019 |
|---|
| Sample type | Verification |
A brief description of the sample | 3/4 HMA-A-SP R15 |
|---|
| The quantity of what the sample constitutes | JMF 7 bags |
From where was the sample collected | Manufacturer |
|---|
| First name of sampler or witnessed by | Vulcan Irwindale |
Last name of sampler or witnessed by | QC |
|---|
| Title of sampler | |
Telephone number of sampler | |
|---|
| Laboratory sample identification | 0438A-19 |
Linked DIME Sample ID | |
|---|
| The fabricator/manufacturer/facility name | Vulcan Materials |
Transportation Laboratory (TL) Number | |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | |
|---|
| Structure name | |
|---|
Material Information
| Material Type | Aggregate |
Source Identification (SMARA or name of Pit) | 91-19-0035::FISH CANYON QUARRY |
|---|
| The fabricator's/manufacturer's product name for the sample | 3/4 HMA-A-SP R15 |
The fabricator/manufacturer designation for the sample | 220805A IRW VLO |
|---|
| The plant number | Unknown |
A detailed description of where the material sample was collected | Belt Cut at Vulcan Irwindale Plant |
|---|
| Where the material sample would have been placed if not sampled | Unknown |
Primary Aggregate Nominal Size | 3/4 inch |
|---|
| The concrete mix design number | Unknown |
Lot number | Unknown |
|---|
| Sublot number | Unknown |
JMF Verification ID | |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2019-07-20-3-1 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Larry Diaz | CT - Southern Regional Laboratory | 07/29/2019 | Michael Magana | Yes | 08/22/2019 | Virgin Aggregate Gradation |
|
| 2019-07-20-3-2 | CTM 205-December 2010: Method of Test for Determining Percentage of Crushed Particles | Satish Jain | CT - Southern Regional Laboratory | 08/07/2019 | Michael Magana | Yes | 08/22/2019 | |
|
| 2019-07-20-3-3 | CTM 206-October 2011: Method of Test for Specific Gravity and Absorption of Coarse Aggregate | Larry Diaz | CT - Southern Regional Laboratory | 07/30/2019 | Michael Magana | Yes | 08/22/2019 | |
|
| 2019-07-20-3-4 | CTM 207-March 2012: Method of Test for Specific Gravity and Absorption of Fine Aggregate | Nader Rashidi | CT - Southern Regional Laboratory | 08/01/2019 | Michael Magana | Yes | 08/22/2019 | |
|
| 2019-07-20-3-5 | CTM 211-May 2010: Abrasion of Coarse Aggregate by Use of the Los Angeles Abrasion Testing Machine | Jose Guzman | CT - Southern Regional Laboratory | 08/30/2019 | Michael Magana | Yes | 08/22/2019 | |
|
| 2019-07-20-3-6 | CTM 217-June 2011: Method of Test for Sand Equivalent | Jose Guzman | CT - Southern Regional Laboratory | 08/30/2019 | Michael Magana | Yes | 08/22/2019 | |
|
| 2019-07-20-3-7 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Satish Jain | CT - Southern Regional Laboratory | 08/07/2019 | Michael Magana | Yes | 08/22/2019 | |
|
| 2019-07-20-3-8 | CTM 234-August 2010: Method of Test for Uncompacted Void Content of Fine Aggregates | Satish Jain | CT - Southern Regional Laboratory | 08/07/2019 | Michael Magana | Yes | 08/22/2019 | |
|
| 2019-07-20-3-9 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Larry Diaz | CT - Southern Regional Laboratory | 07/31/2019 | Michael Magana | Yes | 08/22/2019 | RAP Gradation After Ignition Oven |
|
| 2019-07-20-3-10 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Larry Diaz | CT - Southern Regional Laboratory | 07/31/2019 | Michael Magana | Yes | 08/22/2019 | Combined Virgin Aggregate/RAP Gradation w/Correlation Factors Applied |
|
65319653206532165322653236532465325653266532765331
