Sample Record

Owner Lab

  • CT - Southern Regional Laboratory

DIME Sample ID 2019-07-11-9

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 208973
DEA: 120H1004
EFIS: 1200000180
COOP: 120670
DIST-CO-RTE-PM12-ORA-405,73,405,605-9.3/24.3
Award Date11/07/2016
Closeout DateNot set
Work Description(Alternative Delivery) San Diego Freeway (I-405) Improvement Project SR-73 to I-605, Design Build Project, Administered by Orange County Transportation Authority, Caltrans METS to perform Source Inspection per RFP.
Location DescriptionOrange and Los Angeles Counties: 12-ORA-405 PM 9.3/24.2 / 07-LA-405 PM 0.0/1.2 12-ORA-22 PM R0.7/R3.8 / 12-ORA-22 PM R0.5/R0.7 12-ORA-73 PM R27.2/R27.8 / 12-ORA-605 PM 3.5/R1.6 07-LA-605 PM R0.0/R1.2
QA Service Level1 (Verified on 09/10/2015)

Sample Information

Sample Taken Date07/11/2019 Sample Unique Key9
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing07/22/2019
Sample typeVerification A brief description of the sample3/4 HMA-A-SP R23
The quantity of what the sample constitutesJMF 8 bags From where was the sample collectedManufacturer
First name of sampler or witnessed byAll American Asphalt Corona Last name of sampler or witnessed byQC
Title of sampler Telephone number of sampler
Laboratory sample identification0431A-19 Linked DIME Sample ID
The fabricator/manufacturer/facility nameAll American Asphalt Corona Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA or name of Pit)91-33-0005::ALL AMERICAN ASPHALT
The fabricator's/manufacturer's product name for the sample3/4 HMA-A-SP R23 The fabricator/manufacturer designation for the sample106793
The plant numberUnknown A detailed description of where the material sample was collectedBelt Cut at All American Corona Plant
Where the material sample would have been placed if not sampledUnknown Primary Aggregate Nominal Size3/4 inch
The concrete mix design numberUnknown Lot numberUnknown
Sublot numberUnknown JMF Verification ID

Submitted Tests

DIME Test IDTest MethodTester NameTesting LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2019-07-11-9-1AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)Danilo FerrerCT - Southern Regional Laboratory07/22/2019Michael Magana
Yes
08/22/2019
2019-07-11-9-2AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Satish JainCT - Southern Regional Laboratory07/25/2019Michael Magana
Yes
08/22/2019
2019-07-11-9-3AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)Larry DiazCT - Southern Regional Laboratory07/24/2019Michael Magana
Yes
08/22/2019
2019-07-11-9-4AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)Danilo FerrerCT - Southern Regional Laboratory07/22/2019Michael Magana
Yes
08/22/2019
2019-07-11-9-5AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Larry DiazCT - Southern Regional Laboratory07/26/2019Michael Magana
Yes
08/22/2019
2019-07-11-9-6AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Jose GuzmanCT - Southern Regional Laboratory07/23/2019Michael Magana
Yes
08/22/2019
2019-07-11-9-7ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Satish JainCT - Southern Regional Laboratory07/25/2019Michael Magana
Yes
08/22/2019
2019-07-11-9-8AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Satish JainCT - Southern Regional Laboratory07/25/2019Michael Magana
Yes
08/22/2019
2019-07-11-9-9CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse AggregatesMichael MaganaCT - Southern Regional Laboratory07/26/2019Michael Magana
Yes
08/22/2019RAP Gradation After Ignition Oven
2019-07-11-9-10CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse AggregatesLarry DiazCT - Southern Regional Laboratory07/26/2019Michael Magana
Yes
08/22/2019Combined Virgin Aggregate/RAP Gradation w/Correlation Factors Applied