Sample Record

Owner Lab

  • CT HQ - QASI Bay Area Field Office

DIME Sample ID 2019-07-15-3

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 213267
DEA: 04013584
EFIS: 0416000289
DIST-CO-RTE-PM04-SF-80-8.0/8.3,0.9/1.4
Award Date03/29/2018
Closeout Date12/30/2019
Work DescriptionPier Retention
Location DescriptionIn San Francisco and Alameda Counties on Yerba Buena Island and .4 miles west of Oakland Toll plaza
QA Service Level1 (Verified on 05/01/2018)

Sample Information

Sample Taken Date07/15/2019 Sample Unique Key3
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing09/10/2019
Sample typeQuality Assurance A brief description of the sampleF1554 Anchor Rods Nut Washers
The quantity of what the sample constitutes1 lot of 55 From where was the sample collectedJob Site
First name of sampler or witnessed byStacey Last name of sampler or witnessed byDavis
Title of samplerQAI Telephone number of sampler562 480-6984
Laboratory sample identification Linked DIME Sample ID2019-07-15-2
The fabricator/manufacturer/facility namePortland Bolt Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) FormB362-045-19 Structure unique identifier33-0025
Structure nameSFOBB Pier Retention

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)N/A
Heat Number(s)10543730 ATR 75073529 HHN B48499 Washer Nut Mfg. Lot Number(s)29633-75073529
Washer Mfg. Lot Number(s)0818-923 Bolt SpecificationF1554, Grade 105
Bolt Length(s)12" Nut SpecificationA563 Grade DH HHN
Washer SpecificationF436 FinishHDG
Diameter/Size5/8" Bolt Mfg. Lot NumberNone
Rocap Test Requirement(s)None Lubricant Requirements(s)wax and dye

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2019-07-15-3-1ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)bewing, CT HQ - Sacramento Structural Materials Testing Laboratory09/12/2019bewing
Yes
09/12/2019F1554 Gr 105
2019-07-15-3-2ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)bewing, CT HQ - Sacramento Structural Materials Testing Laboratory09/12/2019bewing
Yes
09/12/2019Nut Proof
2019-07-15-3-3ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory09/12/2019Brian Ewing
Yes
09/12/2019
2019-07-15-3-4ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory09/12/2019Brian Ewing
Yes
09/12/2019
2019-07-15-3-5ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory09/12/2019Brian Ewing
Yes
09/12/2019
2019-07-15-3-6ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory09/12/2019Brian Ewing
Yes
09/12/2019
2019-07-15-3-7ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory09/12/2019Brian Ewing
Yes
09/12/2019
2019-07-15-3-8ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory09/12/2019Brian Ewing
Yes
09/12/2019
2019-07-15-3-9ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory09/12/2019Brian Ewing
Yes
09/12/2019
2019-07-15-3-10ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory09/12/2019Brian Ewing
Yes
09/12/2019

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2019-07-15-3-1 ASTM F606-14 (Verified)
DIME Test ID: 2019-07-15-3-2 ASTM F606-14a (Verified)
DIME Test ID: 2019-07-15-3-3 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-07-15-3-4 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-07-15-3-5 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-07-15-3-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-07-15-3-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-07-15-3-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-07-15-3-9 ASTM B499-14 (Verified)
DIME Test ID: 2019-07-15-3-10 ASTM B499-14 (Verified)
DIME Test ID: 2019-07-15-3-11 ASTM B499-14 (Verified)
DIME Test ID: 2019-07-15-3-12 ASTM B499-14 (Verified)
DIME Test ID: 2019-07-15-3-13 ASTM B499-14 (Verified)
DIME Test ID: 2019-07-15-3-14 ASTM B499-14 (Verified)
DIME Test ID: 2019-07-15-3-15 ASTM B499-14 (Verified)
DIME Test ID: 2019-07-15-3-16 ASTM B499-14 (Verified)
DIME Test ID: 2019-07-15-3-17 ASTM B499-14 (Verified)
DIME Test ID: 2019-07-15-3-18 ASTM E18-15 (Verified)
DIME Test ID: 2019-07-15-3-19 ASTM E18-15 (Verified)