Sample Record

Owner Lab

  • CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2019-05-03-8

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 88888
DEA: SMTL-STOCK
EFIS: SMTL-STOCK
DIST-CO-RTE-PM59---
Award DateNot set
Closeout DateNot set
Work DescriptionSpecial project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location DescriptionNot set
QA Service LevelNOT VERIFIED

Sample Information

Sample Taken Date05/03/2019 Sample Unique Key8
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing05/14/2019
Sample typeQuality Assurance A brief description of the sampleA325 Bolts
The quantity of what the sample constitutes56 From where was the sample collectedManufacturer
First name of sampler or witnessed byJason Last name of sampler or witnessed byWilliams
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameFontana Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)
Heat Number(s)CR10586610 CR10569260 CR10571960 10582310 CR10569300 Nut Mfg. Lot Number(s)
Washer Mfg. Lot Number(s) Bolt SpecificationHDG
Bolt Length(s)1.75" 2.5" 4" 3" Nut SpecificationNA
Washer SpecificationNA FinishHDG
Diameter/Size.625" .75" 1" 1.25" Bolt Mfg. Lot Number821310 815137 816273 L023D1 816633
Rocap Test Requirement(s) Lubricant Requirements(s)

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2019-05-03-8-1ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)Steve, CT HQ - Sacramento Structural Materials Testing Laboratory05/20/2019Steve
Yes
06/06/2019A325
2019-05-03-8-2ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)Steve, CT HQ - Sacramento Structural Materials Testing Laboratory05/20/2019Steve
Yes
06/06/2019A325
2019-05-03-8-3ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory05/23/2019Steven Paine
Yes
06/06/2019
2019-05-03-8-4ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory05/23/2019Steven Paine
Yes
06/06/2019
2019-05-03-8-5ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory05/23/2019Steven Paine
Yes
06/06/2019
2019-05-03-8-6ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory05/23/2019Steven Paine
Yes
06/06/2019
2019-05-03-8-7ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory05/23/2019Steven Paine
Yes
06/06/2019
2019-05-03-8-8ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory05/23/2019Steven Paine
Yes
06/06/2019
2019-05-03-8-9ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory05/23/2019Steven Paine
Yes
06/06/2019
2019-05-03-8-10ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory05/23/2019Steven Paine
Yes
06/06/2019

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2019-05-03-8-1 ASTM F606-14a (Verified)
DIME Test ID: 2019-05-03-8-2 ASTM F606-14a (Verified)
DIME Test ID: 2019-05-03-8-3 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-05-03-8-4 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-05-03-8-5 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-05-03-8-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-05-03-8-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-05-03-8-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-05-03-8-9 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-05-03-8-10 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-03-8-11 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-03-8-12 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-03-8-13 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-03-8-14 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-03-8-15 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-03-8-16 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-03-8-17 ASTM E18-15 (Verified)
DIME Test ID: 2019-05-03-8-18 ASTM E18-15 (Verified)
DIME Test ID: 2019-05-03-8-19 ASTM E18-15 (Verified)
DIME Test ID: 2019-05-03-8-20 ASTM E18-15 (Verified)
DIME Test ID: 2019-05-03-8-21 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-05-03-8-22 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-05-03-8-23 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-05-03-8-24 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-05-03-8-25 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-05-03-8-26 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-03-8-27 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-03-8-28 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-03-8-29 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-03-8-30 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-03-8-31 ASTM E18-15 (Verified)
DIME Test ID: 2019-05-03-8-32 ASTM E18-15 (Verified)
DIME Test ID: 2019-05-03-8-33 ASTM E18-15 (Verified)
DIME Test ID: 2019-05-03-8-34 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-05-03-8-35 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-05-03-8-36 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-05-03-8-37 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-03-8-38 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-03-8-39 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-03-8-40 ASTM E18-15 (Verified)
DIME Test ID: 2019-05-03-8-41 ASTM E18-15 (Verified)
DIME Test ID: 2019-05-03-8-42 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-05-03-8-43 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-05-03-8-44 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-05-03-8-45 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-05-03-8-46 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-05-03-8-47 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-03-8-48 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-03-8-49 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-03-8-50 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-03-8-51 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-03-8-52 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-05-03-8-53 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-05-03-8-54 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-05-03-8-55 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-05-03-8-56 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-05-03-8-57 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-03-8-58 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-03-8-59 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-03-8-60 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-03-8-61 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-03-8-62 ASTM E18-15 (Verified)
DIME Test ID: 2019-05-03-8-63 ASTM E18-15 (Verified)
DIME Test ID: 2019-05-03-8-64 ASTM E18-15 (Verified)