Owner Lab
- CT HQ - QASI Bay Area Field Office
DIME Sample ID 2019-05-10-12
Sample is locked from editing. info
Project Information
Project Identifiers | Project ID: 210037 DEA: 043G4424 EFIS: 0412000042 |
DIST-CO-RTE-PM | 04-SF-80-R5.6/7.6 |
Award Date | 03/22/2018 |
Closeout Date | Not set |
Work Description | WEST SPAN DAMPER BRACKET A325 BOLT TESTING |
Location Description | SFOBB WEST SPAN |
QA Service Level | 1 (Verified on 11/04/2014) |
Sample Information
Sample Taken Date | 05/10/2019 |
Sample Unique Key | 12 |
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 05/14/2019 |
Sample type | Quality Assurance |
A brief description of the sample | 1 1/4" dia Hot dip galv. nuts and washers |
The quantity of what the sample constitutes | 225 |
From where was the sample collected | Job Site |
First name of sampler or witnessed by | Greg |
Last name of sampler or witnessed by | Thompson |
Title of sampler | Associate Steel Inspector |
Telephone number of sampler | 510-376-7155 |
Laboratory sample identification | |
Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | California Engineering Contractor |
Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | B9-050-19 |
Structure unique identifier | |
Structure name | SFOBB |
---|
Material Information
Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | none |
Heat Number(s) | 62147858-04 nuts washers 9517227 |
Nut Mfg. Lot Number(s) | 29107-6214785804 |
Washer Mfg. Lot Number(s) | D6528 |
Bolt Specification | none |
Bolt Length(s) | Unknown |
Nut Specification | A563-DH |
Washer Specification | F436 |
Finish | HDG |
Diameter/Size | 1 1/4" |
Bolt Mfg. Lot Number | |
Rocap Test Requirement(s) | |
Lubricant Requirements(s) | yes |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
2019-05-10-12-1 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load) | Steve | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/21/2019 | Steve | Yes | 06/06/2019 | Nut Proof Load | |
2019-05-10-12-2 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/23/2019 | Steven Paine | Yes | 06/06/2019 | | |
2019-05-10-12-3 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/23/2019 | Steven Paine | Yes | 06/06/2019 | | |
2019-05-10-12-4 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/23/2019 | Steven Paine | Yes | 06/06/2019 | | |
2019-05-10-12-5 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/23/2019 | Steven Paine | Yes | 06/06/2019 | | |
2019-05-10-12-6 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/23/2019 | Steven Paine | Yes | 06/06/2019 | | |
2019-05-10-12-7 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/23/2019 | Steven Paine | Yes | 06/06/2019 | | |
2019-05-10-12-8 | ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/23/2019 | Steven Paine | Yes | 06/06/2019 | | |
2019-05-10-12-9 | ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/23/2019 | Steven Paine | Yes | 06/06/2019 | | |
602656046560466604676046860469604706047160472
Sample File Attachments
File Name | Extension | Date Uploaded | Actions |
No results found. |
Test File Attachments
DIME Test ID: 2019-05-10-12-1 ASTM F606-14a (Verified)
DIME Test ID: 2019-05-10-12-2 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-10-12-3 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-10-12-4 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-10-12-5 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-10-12-6 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-10-12-7 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-10-12-8 ASTM E18-15 (Verified)
DIME Test ID: 2019-05-10-12-9 ASTM E18-15 (Verified)