Owner Lab
- CT QASI - Bay Area Field Laboratory
DIME Sample ID 2019-05-10-9
Sample is locked from editing. info
Project Information
Project Identifiers | Project ID: 210037 DEA: 043G4424 EFIS: 0412000042 |
DIST-CO-RTE-PM | 04-SF-80-R5.6/7.6 |
Award Date | 03/22/2018 |
Closeout Date | Not set |
Work Description | WEST SPAN DAMPER BRACKET A325 BOLT TESTING |
Location Description | SFOBB WEST SPAN |
QA Service Level | 1 (Verified on 11/04/2014) |
Sample Information
Sample Taken Date | 05/10/2019 |
Sample Unique Key | 9 |
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 05/14/2019 |
Sample type | Quality Assurance |
A brief description of the sample | 1" dia A490 bolt assemblies |
The quantity of what the sample constitutes | 184 |
From where was the sample collected | Job Site |
First name of sampler or witnessed by | Greg |
Last name of sampler or witnessed by | Thompson |
Title of sampler | Associate Steel Inspector |
Telephone number of sampler | 510-376-7155 |
Laboratory sample identification | |
Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | California Engineering Contractor |
Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | B9-041-19 |
Structure unique identifier | |
Structure name | |
---|
Material Information
Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | TT0113074 |
Heat Number(s) | 10426680 |
Nut Mfg. Lot Number(s) | 29402-6214745403 |
Washer Mfg. Lot Number(s) | D6838 |
Bolt Specification | A490 |
Bolt Length(s) | 9" |
Nut Specification | A563-DH |
Washer Specification | F436 |
Finish | plain |
Diameter/Size | 1" |
Bolt Mfg. Lot Number | 040810 |
Rocap Test Requirement(s) | yes |
Lubricant Requirements(s) | |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
2019-05-10-9-1 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge) | Steve | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/21/2019 | Steve | Yes | 05/31/2019 | A490 | |
2019-05-10-9-2 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load) | Steve | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/21/2019 | Steve | Yes | 05/31/2019 | Nut Proof Load | |
2019-05-10-9-3 | ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/23/2019 | Steven Paine | Yes | 05/31/2019 | | |
2019-05-10-9-4 | ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/23/2019 | Steven Paine | Yes | 05/31/2019 | | |
2019-05-10-9-5 | ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/23/2019 | Steven Paine | Yes | 05/31/2019 | | |
2019-05-10-9-6 | ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/23/2019 | Steven Paine | Yes | 05/31/2019 | | |
2019-05-10-9-7 | ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/23/2019 | Steven Paine | Yes | 05/31/2019 | | |
60239602426049760498604996050060501