DIME - Sample Record for DIME Sample ID 2019-05-02-2

DIME » All Projects » Project - DEA: 100P5504 » Sample 2019-05-02-2 » Sample Details

Sample Record

Owner Lab

CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2019-05-02-2

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 213617 DEA: 100P5504 EFIS: 1012000055
DIST-CO-RTE-PM	10-AMA,STA-88,152-4.6
Award Date	11/09/2018
Closeout Date	08/03/2021
Work Description	Aqueduct bridge seismic retrofit. CURED IN PLACE PIPE LINER AT 0.6 MILES WEST OF MARIN LANE NEAR IONE IN AMADOR COUNTY.
Location Description	MERCED AND STANISLAUS COUNTIES AT VARIOUS LOCATIONS
QA Service Level	1 (Verified on 12/20/2018)

Sample Information

Sample Taken Date	05/02/2019	Sample Unique Key	2
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	05/08/2019
Sample type	Quality Assurance	A brief description of the sample	1-1/4" F1554 Gr. 55 Galv. ATR 1 Lot
The quantity of what the sample constitutes	1 lot	From where was the sample collected	Fabricator
First name of sampler or witnessed by	Joe	Last name of sampler or witnessed by	Adame
Title of sampler	CT METS QA INSPECTOR	Telephone number of sampler	3609531155
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	CK Johnson Industries	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form	B53-038-19	Structure unique identifier
Structure name

Material Information

Material Type	SMTL TM3 - Fastener Assembly	Rocap Number(s)	n/a
Heat Number(s)	1201000624	Nut Mfg. Lot Number(s)	369544B
Washer Mfg. Lot Number(s)	0918-971	Bolt Specification	F1554
Bolt Length(s)	16"	Nut Specification	A563 HVY HX HDG
Washer Specification	F436 HDG	Finish	HDG
Diameter/Size	1-1/4"	Bolt Mfg. Lot Number	B1124809
Rocap Test Requirement(s)		Lubricant Requirements(s)

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2019-05-02-2-1	ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)	Steve, CT HQ - Sacramento Structural Materials Testing Laboratory	05/10/2019	Steve	Yes	05/22/2019
2019-05-02-2-2	ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)	Steve, CT HQ - Sacramento Structural Materials Testing Laboratory	05/10/2019	Steve	Yes	05/22/2019
2019-05-02-2-3	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Steve, CT HQ - Sacramento Structural Materials Testing Laboratory	05/13/2019	Steve	Yes	05/22/2019	Nut Proof Load
2019-05-02-2-4	ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)	Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory	05/13/2019	Steven Paine	Yes	05/22/2019
2019-05-02-2-5	ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)	Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory	05/13/2019	Steven Paine	Yes	05/22/2019
2019-05-02-2-6	ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)	Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory	05/13/2019	Steven Paine	Yes	05/22/2019
2019-05-02-2-7	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory	05/13/2019	Steven Paine	Yes	05/22/2019
2019-05-02-2-8	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory	05/13/2019	Steven Paine	Yes	05/22/2019
2019-05-02-2-9	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory	05/13/2019	Steven Paine	Yes	05/22/2019
2019-05-02-2-10	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory	05/13/2019	Steven Paine	Yes	05/22/2019

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2019-05-02-2-1 ASTM A370-15 (Verified)
DIME Test ID: 2019-05-02-2-2 ASTM A370-15 (Verified)
DIME Test ID: 2019-05-02-2-3 ASTM F606-14a (Verified)
DIME Test ID: 2019-05-02-2-4 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-05-02-2-5 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-05-02-2-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-05-02-2-7 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-02-2-8 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-02-2-9 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-02-2-10 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-02-2-11 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-02-2-12 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-02-2-13 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-02-2-14 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-02-2-15 ASTM B499-14 (Verified)
DIME Test ID: 2019-05-02-2-16 ASTM E18-15 (Verified)
DIME Test ID: 2019-05-02-2-17 ASTM E18-15 (Verified)