DIME - Sample Record for DIME Sample ID 2019-04-16-12

DIME » All Projects » Project - DEA: 043G4624 » Sample 2019-04-16-12 » Sample Details

Sample Record

Owner Lab

CT HQ - QASI Sacramento Field Office

DIME Sample ID 2019-04-16-12

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 211772 DEA: 043G4624 EFIS: 0412000062
DIST-CO-RTE-PM	04-CC-680-25.0-25.4
Award Date	01/04/2017
Closeout Date	11/12/2019
Work Description	Floor Beam Mitigation at Benicia-Martinez Bridge (28-0153L)
Location Description	Benicia-Martinez Bridge Floor Beam Mitigation Project
QA Service Level	1 (Verified on 09/23/2016)

Sample Information

Sample Taken Date	04/16/2019	Sample Unique Key	12
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	04/16/2019
Sample type	Quality Assurance	A brief description of the sample	A325 Fasteners
The quantity of what the sample constitutes	as per sampling table	From where was the sample collected	Fabricator
First name of sampler or witnessed by	Richard	Last name of sampler or witnessed by	Bettencourt
Title of sampler	QA Inspector	Telephone number of sampler	209-201-5432
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	CK Johnson Industries	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form	S25-064-19	Structure unique identifier	Not set
Structure name	Not set

Material Information

Material Type	SMTL TM3 - Fastener Assembly	Rocap Number(s)	R407066A-2, R350831A, R33459A, R382642A, R332919A, R321531A, R282789A,
Heat Number(s)	100888940, NF14102452, NF13203760, NF16103168, NF13202676, NF12204477, NF10103192, DL17102697, DL15107150	Nut Mfg. Lot Number(s)	363695A,36395A,36395A, 36395A, 374243A, 374243A, 374243A,
Washer Mfg. Lot Number(s)	C9199M, C9199M, C9199M, C9199M, 0917-628, 0917-628, 0917-628,	Bolt Specification	A325
Bolt Length(s)	3",3-3/4",4-1/4",4-3/4",4-1/2" , 5-1/2", 6",	Nut Specification	DH MG
Washer Specification	F436,	Finish	Mech Galv
Diameter/Size	1", 1", 1", 1", 7/8", 7/8", 7/8"	Bolt Mfg. Lot Number	406066A, 350831A, 33459A, 382642A, 33291A, 32
Rocap Test Requirement(s)		Lubricant Requirements(s)

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2019-04-16-12-1	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	Steve, CT HQ - Sacramento Structural Materials Testing Laboratory	04/30/2019	Steve	Yes	05/08/2019	A325
2019-04-16-12-2	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	Steve, CT HQ - Sacramento Structural Materials Testing Laboratory	04/30/2019	Steve	Yes	05/08/2019	A325
2019-04-16-12-3	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	Steve, CT HQ - Sacramento Structural Materials Testing Laboratory	04/30/2019	Steve	Yes	05/08/2019	A325
2019-04-16-12-4	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	Steve, CT HQ - Sacramento Structural Materials Testing Laboratory	04/30/2019	Steve	Yes	05/08/2019	A325
2019-04-16-12-5	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	Steve, CT HQ - Sacramento Structural Materials Testing Laboratory	04/30/2019	Steve	Yes	05/08/2019	A325
2019-04-16-12-6	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	Steve, CT HQ - Sacramento Structural Materials Testing Laboratory	04/30/2019	Steve	Yes	05/08/2019	A325
2019-04-16-12-7	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	Steve, CT HQ - Sacramento Structural Materials Testing Laboratory	04/30/2019	Steve	Yes	05/08/2019	A325
2019-04-16-12-8	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Steve, CT HQ - Sacramento Structural Materials Testing Laboratory	04/30/2019	Steve	Yes	05/08/2019	nut proof
2019-04-16-12-9	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Steve, CT HQ - Sacramento Structural Materials Testing Laboratory	04/30/2019	Steve	Yes	05/08/2019	Nut Proof Load
2019-04-16-12-10	ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)	Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory	05/01/2019	Steven Paine	Yes	05/08/2019

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2019-04-16-12-1 ASTM F606-14a (Verified)
DIME Test ID: 2019-04-16-12-2 ASTM F606-14a (Verified)
DIME Test ID: 2019-04-16-12-3 ASTM F606-14a (Verified)
DIME Test ID: 2019-04-16-12-4 ASTM F606-14a (Verified)
DIME Test ID: 2019-04-16-12-5 ASTM F606-14a (Verified)
DIME Test ID: 2019-04-16-12-6 ASTM F606-14a (Verified)
DIME Test ID: 2019-04-16-12-7 ASTM F606-14a (Verified)
DIME Test ID: 2019-04-16-12-8 ASTM F606-14a (Verified)
DIME Test ID: 2019-04-16-12-9 ASTM F606-14a (Verified)
DIME Test ID: 2019-04-16-12-10 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-04-16-12-11 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-04-16-12-12 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-04-16-12-13 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-04-16-12-14 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-04-16-12-15 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-04-16-12-16 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-04-16-12-17 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-04-16-12-18 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-04-16-12-19 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-04-16-12-20 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-04-16-12-21 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-12-22 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-12-23 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-12-24 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-12-25 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-12-26 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-12-27 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-12-28 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-12-29 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-12-30 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-12-31 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-12-32 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-12-33 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-12-34 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-12-35 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-12-36 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-12-37 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-12-38 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-12-39 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-12-40 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-12-41 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-12-42 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-12-43 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-12-44 ASTM E18-15 (Verified)
DIME Test ID: 2019-04-16-12-45 ASTM E18-15 (Verified)
DIME Test ID: 2019-04-16-12-46 ASTM E18-15 (Verified)
DIME Test ID: 2019-04-16-12-47 ASTM E18-15 (Verified)
DIME Test ID: 2019-04-16-12-48 ASTM E18-15 (Verified)