Owner Lab
- CT HQ - Sacramento Structural Materials Testing Laboratory
DIME Sample ID 2019-02-27-3
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 213583
DEA: 060H2004
EFIS: 0612000157 |
|---|
| DIST-CO-RTE-PM | 06-TUL-201,216-12.5,21.2,18.7 |
|---|
| Award Date | 11/29/2018 |
|---|
| Closeout Date | 11/29/2021 |
|---|
| Work Description | BRIDGE WIDENING, UPGRADE LANES AND OUTSIDE SHOULDERS. |
|---|
| Location Description | TULARE COUNTY NEAR CUTLER ON ROUTE 201 AT SAND CREEK BRIDGE AND AT FRIANT KERN CANAL BRIDGE AND NEAR WOODLAKE ON ROUTE 216 AT KAWEAH RIVER BRIDGE |
|---|
| QA Service Level | 1 (Verified on 09/25/2018) |
|---|
Sample Information
| Sample Taken Date | 02/27/2019 |
Sample Unique Key | 3 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 03/08/2019 |
|---|
| Sample type | Quality Assurance |
A brief description of the sample | Flash Welded Rebar Hoops |
|---|
| The quantity of what the sample constitutes | 12 |
From where was the sample collected | Fabricator |
|---|
| First name of sampler or witnessed by | Russell |
Last name of sampler or witnessed by | Lynch |
|---|
| Title of sampler | |
Telephone number of sampler | 3609216934 |
|---|
| Laboratory sample identification | |
Linked DIME Sample ID | |
|---|
| The fabricator/manufacturer/facility name | TNT Rebar Nucor |
Transportation Laboratory (TL) Number | |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | L96-053-19 |
Structure unique identifier | Not set |
|---|
| Structure name | Not set |
|---|
Material Information
| Material Type | SMTL TM5 - Welded Hoops |
Production or Authorization Testing | Production Testing |
|---|
| Service or Ultimate | Ultimate |
Rebar Heat Number(s) | PL17209232 |
|---|
| Hoop Manufacturer Lot Number(s) | 1, 2, 7 |
Material Standard Code | ASTM A706 |
|---|
| Material Grade | 60 |
Rebar Size | 6 |
|---|
| Diameter of Hoop | 1'-6" |
Epoxy Coated | No |
|---|
| Epoxy Coating Color | NA |
Rebar Manufacturer | Nucor |
|---|
| Welding Company | TNT Rebar |
Coating Standards | Uncoated |
|---|
| Weld Type | Flash Welded |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2019-02-27-3-1 | CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Tensile) | Brian | CT HQ - Sacramento Structural Materials Testing Laboratory | 03/08/2019 | Brian | Yes | 03/20/2019 | Bar Broke in Heat Affected Zone |
|
| 2019-02-27-3-2 | CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Tensile) | Brian | CT HQ - Sacramento Structural Materials Testing Laboratory | 03/08/2019 | Brian | Yes | 03/20/2019 | Bar Broke; OK Necking |
|
| 2019-02-27-3-3 | CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Tensile) | Brian | CT HQ - Sacramento Structural Materials Testing Laboratory | 03/08/2019 | Brian | Yes | 03/20/2019 | Bar Broke; OK Necking |
|
| 2019-02-27-3-4 | CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Tensile) | Brian | CT HQ - Sacramento Structural Materials Testing Laboratory | 03/08/2019 | Brian | Yes | 03/20/2019 | Bar Broke; OK Necking |
|
| 2019-02-27-3-5 | CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Tensile) | Brian | CT HQ - Sacramento Structural Materials Testing Laboratory | 03/11/2019 | Brian | Yes | 03/20/2019 | Bar Broke in Heat Affected Zone |
|
| 2019-02-27-3-6 | CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Tensile) | Brian | CT HQ - Sacramento Structural Materials Testing Laboratory | 03/11/2019 | Brian | Yes | 03/20/2019 | Bar Broke in Heat Affected Zone |
|
| 2019-02-27-3-7 | CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Tensile) | Brian | CT HQ - Sacramento Structural Materials Testing Laboratory | 03/11/2019 | Brian | Yes | 03/20/2019 | Bar Broke; OK Necking |
|
| 2019-02-27-3-8 | CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Tensile) | Brian | CT HQ - Sacramento Structural Materials Testing Laboratory | 03/11/2019 | Brian | Yes | 03/20/2019 | Bar Broke; OK Necking |
|
| 2019-02-27-3-9 | CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Tensile) | Brian | CT HQ - Sacramento Structural Materials Testing Laboratory | 03/11/2019 | Brian | Yes | 03/20/2019 | Bar Broke; OK Necking |
|
| 2019-02-27-3-10 | CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Tensile) | Brian | CT HQ - Sacramento Structural Materials Testing Laboratory | 03/11/2019 | Brian | Yes | 03/20/2019 | Bar Broke; OK Necking |
|
56780567815678256783567855678656787567885678956790
