DIME - Sample Record for DIME Sample ID 2019-01-28-13

DIME » All Projects » Project - DEA: 024G5204 » Sample 2019-01-28-13 » Sample Details

Sample Record

Owner Lab

CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2019-01-28-13

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 212185 DEA: 024G5204 EFIS: 0214000022
DIST-CO-RTE-PM	02-SHA-5-R28.0 - R29.2
Award Date	05/21/2018
Closeout Date	09/02/2020
Work Description	PIT RIVER BRIDGE DECK & CATWALK REHABILITATION
Location Description	SHASTA COUNTY ABOUT 6 MILES NORTH OF SHASTA LAKE FROM 0.2 MILE SOUTH TO 0.9 MILE NORTH OF PIT RIVER BRIDGE OVERHEAD
QA Service Level	1 (Verified on 06/05/2017)

Sample Information

Sample Taken Date	01/28/2019	Sample Unique Key	13
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	02/14/2019
Sample type	Quality Assurance	A brief description of the sample	A325 Bolt Assembly
The quantity of what the sample constitutes	5	From where was the sample collected	Job Site
First name of sampler or witnessed by	Jordan	Last name of sampler or witnessed by	Webb
Title of sampler		Telephone number of sampler
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	Midwest Structural Products	Transportation Laboratory (TL) Number	C733280
Inspector Lot Number from the Transportation Laboratory (TL) Form	NA	Structure unique identifier	Not set
Structure name	Not set

Material Information

Material Type	SMTL TM3 - Fastener Assembly	Rocap Number(s)
Heat Number(s)		Nut Mfg. Lot Number(s)	407093A
Washer Mfg. Lot Number(s)	310706	Bolt Specification	A325
Bolt Length(s)	2.25	Nut Specification	A563
Washer Specification	F436	Finish	MG
Diameter/Size	.625	Bolt Mfg. Lot Number	413227A
Rocap Test Requirement(s)		Lubricant Requirements(s)

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2019-01-28-13-1	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	02/19/2019	Fred	Yes	02/27/2019	Nut Proof Load
2019-01-28-13-2	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	02/19/2019	Fred	Yes	02/27/2019	Nut Proof Load
2019-01-28-13-3	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	02/19/2019	Fred	Yes	02/27/2019	A325
2019-01-28-13-4	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	02/19/2019	Fred	Yes	02/27/2019	A325
2019-01-28-13-5	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	02/20/2019	Brian Ewing	Yes	02/27/2019
2019-01-28-13-6	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	02/20/2019	Brian Ewing	Yes	02/27/2019
2019-01-28-13-7	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	02/20/2019	Brian Ewing	Yes	02/27/2019
2019-01-28-13-8	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	02/20/2019	Brian Ewing	Yes	02/27/2019
2019-01-28-13-9	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	02/20/2019	Brian Ewing	Yes	02/27/2019
2019-01-28-13-10	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	02/20/2019	Brian Ewing	Yes	02/27/2019

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2019-01-28-13-1 ASTM F606-14a (Verified)
DIME Test ID: 2019-01-28-13-2 ASTM F606-14a (Verified)
DIME Test ID: 2019-01-28-13-3 ASTM F606-14a (Verified)
DIME Test ID: 2019-01-28-13-4 ASTM F606-14a (Verified)
DIME Test ID: 2019-01-28-13-5 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-01-28-13-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-01-28-13-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-01-28-13-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-01-28-13-9 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-01-28-13-10 ASTM B499-14 (Verified)
DIME Test ID: 2019-01-28-13-11 ASTM B499-14 (Verified)
DIME Test ID: 2019-01-28-13-12 ASTM B499-14 (Verified)
DIME Test ID: 2019-01-28-13-13 ASTM B499-14 (Verified)
DIME Test ID: 2019-01-28-13-14 ASTM B499-14 (Verified)
DIME Test ID: 2019-01-28-13-15 ASTM B499-14 (Verified)
DIME Test ID: 2019-01-28-13-16 ASTM B499-14 (Verified)
DIME Test ID: 2019-01-28-13-17 ASTM B499-14 (Verified)
DIME Test ID: 2019-01-28-13-18 ASTM B499-14 (Verified)
DIME Test ID: 2019-01-28-13-19 ASTM B499-14 (Verified)
DIME Test ID: 2019-01-28-13-20 ASTM B499-14 (Verified)
DIME Test ID: 2019-01-28-13-21 ASTM B499-14 (Verified)
DIME Test ID: 2019-01-28-13-22 ASTM B499-14 (Verified)
DIME Test ID: 2019-01-28-13-23 ASTM B499-14 (Verified)
DIME Test ID: 2019-01-28-13-24 ASTM B499-14 (Verified)
DIME Test ID: 2019-01-28-13-25 ASTM E18-15 (Verified)
DIME Test ID: 2019-01-28-13-26 ASTM E18-15 (Verified)
DIME Test ID: 2019-01-28-13-27 ASTM E18-15 (Verified)