DIME Sample ID 2019-01-04-7
Sample is locked from editing. info
Project Information
Project Identifiers | Project ID: 66667 DEA: JMFPP EFIS: 0019000043 |
DIST-CO-RTE-PM | 59--- |
Award Date | Not set |
Closeout Date | Not set |
Work Description | Special project for submitting Sample information for JMF Prequalification Program. |
Location Description | Not set |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 01/04/2019 |
Sample Unique Key | 7 |
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 01/04/2019 |
Sample type | Quality Control |
A brief description of the sample | 3/4 HMA Type A |
The quantity of what the sample constitutes | JMF |
From where was the sample collected | Source |
First name of sampler or witnessed by | Carlos |
Last name of sampler or witnessed by | Manzo |
Title of sampler | QC Technician |
Telephone number of sampler | 805-440-7390 |
Laboratory sample identification | TEM34SPLA |
Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | SPM-Avenal |
Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | Not set |
Structure name | Not set |
---|
Material Information
Material Type | Aggregate |
Source Identification (SMARA or name of Pit) | 91-10-0006::AVENAL AGGREGATES |
The fabricator's/manufacturer's product name for the sample | 3/4 HMA Type A |
The fabricator/manufacturer designation for the sample | JMF virgin aggreate |
The plant number | 1 |
A detailed description of where the material sample was collected | Stockpile @ Plant |
Where the material sample would have been placed if not sampled | Unknown |
Primary Aggregate Nominal Size | 3/4 inch |
The concrete mix design number | TEM34SPLA |
Lot number | Not set |
Sublot number | Not set |
HMA Design ID | JMF3512-2019-68-Test |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
2019-01-04-7-1 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | unknown | Sierra Pacific Materials | 01/04/2019 | Michael Davis | Yes | 02/01/2019 | | |
2019-01-04-7-2 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | unknown | Sierra Pacific Materials | 01/04/2019 | Michael Davis | Yes | 02/01/2019 | | |
2019-01-04-7-3 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | unknown | Sierra Pacific Materials | 01/04/2019 | Michael Davis | Yes | 02/01/2019 | | |
2019-01-04-7-4 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | unknown | Sierra Pacific Materials | 01/04/2019 | Michael Davis | Yes | 02/01/2019 | Grading designation not specified on 3512 | |
2019-01-04-7-5 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | unknown | Sierra Pacific Materials | 01/04/2019 | Michael Davis | Yes | 02/01/2019 | | |
2019-01-04-7-6 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | unknown | Sierra Pacific Materials | 01/04/2019 | Michael Davis | Yes | 02/01/2019 | | |
2019-01-04-7-7 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | unknown | Sierra Pacific Materials | 01/04/2019 | Michael Davis | Yes | 02/01/2019 | | |
2019-01-04-7-8 | CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index) | unknown | Sierra Pacific Materials | 01/04/2019 | Michael Davis | Yes | 02/01/2019 | LL and PL were not reported on the 3512 | |
2019-01-04-7-9 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | unknown | Sierra Pacific Materials | 01/04/2019 | Michael Davis | Yes | 02/01/2019 | | |
2019-01-04-7-10 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | unknown | Sierra Pacific Materials | 01/04/2019 | Michael Davis | Yes | 02/01/2019 | | |
55350553515535255353553545535555356553575535855359