DIME - Sample Record for DIME Sample ID 2018-05-04-17

DIME » All Projects » Project - DEA: 020E1804 » Sample 2018-05-04-17 » Sample Details

Sample Record

Owner Lab

CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2018-05-04-17

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 212741 DEA: 020E1804 EFIS: 0200000022
DIST-CO-RTE-PM	02-PLU-89-29.8/30.2
Award Date	12/13/2017
Closeout Date	12/17/2021
Work Description	BRIDGE REPLACEMENT
Location Description	PLUMAS COUNTY NEAR CANYON DAM FROM 0.2 MILE SOUTH TO 0.3 MILE NORTH OF LAKE ALMANOR SPILLWAY
QA Service Level	1 (Verified on 12/06/2017)

Sample Information

Sample Taken Date	05/04/2018	Sample Unique Key	17
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	05/07/2018
Sample type	Verification	A brief description of the sample	Sized, Untreated, Virgin Aggregates
The quantity of what the sample constitutes	JMF Verification	From where was the sample collected	Source
First name of sampler or witnessed by	Derrick	Last name of sampler or witnessed by	Curry
Title of sampler		Telephone number of sampler
Laboratory sample identification	D77352	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Sierra Cascade Aggregate and Asphalt Products	Transportation Laboratory (TL) Number	894770
Inspector Lot Number from the Transportation Laboratory (TL) Form	JMF 18-04-S1	Structure unique identifier	Not set
Structure name	Not set

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-32-0002::CHESTER PIT
The fabricator's/manufacturer's product name for the sample	Unknown	The fabricator/manufacturer designation for the sample	18-1932.49
The plant number	Unknown	A detailed description of where the material sample was collected	Stockpiles
Where the material sample would have been placed if not sampled	Unknown	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number	JMF 18-04-S1	Lot number	Not set
Sublot number	Not set	Aggregate Mix Number	Not set

JMF Information

Verification ID	JMF3513-2019-48	Date Created	01/18/2019
JMF Submittal ID	JMF3511-22-2019-65	JMF Status	Submittal Authorized For Use
Producer Mix ID	18-1932.49	Authorized Date	01/24/2019

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date
2018-05-04-17-1	CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index)	Mike Cruz, CT D02 - Redding Northern Regional Laboratory	05/18/2018	Ward Jenkins	Yes	01/18/2019
2018-05-04-17-2	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Colt Sweeny, CT D02 - Redding Northern Regional Laboratory	05/21/2018	Ward Jenkins	Yes	01/18/2019
2018-05-04-17-3	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	Dennis Hickey, CT D02 - Redding Northern Regional Laboratory	05/21/2018	Ward Jenkins	Yes	01/18/2019
2018-05-04-17-4	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	Dennis Hickey, CT D02 - Redding Northern Regional Laboratory	05/21/2018	Ward Jenkins	Yes	01/18/2019
2018-05-04-17-5	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	Mike Cruz, CT D02 - Redding Northern Regional Laboratory	05/17/2018	Ward Jenkins	Yes	01/18/2019
2018-05-04-17-6	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	Darrell Valasek, CT D02 - Redding Northern Regional Laboratory	05/18/2018	Ward Jenkins	Yes	01/18/2019
2018-05-04-17-7	AASHTO T210-15: Standard Method of Test for Aggregate Durability Index (Durability Index)	Mike Cruz, CT D02 - Redding Northern Regional Laboratory	05/17/2018	Ward Jenkins	Yes	01/18/2019
2018-05-04-17-8	AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)	Mike Cruz, CT D02 - Redding Northern Regional Laboratory	05/21/2018	Ward Jenkins	Yes	01/18/2019
2018-05-04-17-9	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	Mike Cruz, CT D02 - Redding Northern Regional Laboratory	05/21/2018	Ward Jenkins	Yes	01/18/2019

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2018-05-04-17-1 CTM 204-June 2010 (Verified)
DIME Test ID: 2018-05-04-17-2 AASHTO T335-09r13 (Verified)
DIME Test ID: 2018-05-04-17-3 AASHTO T85-13 (Verified)
DIME Test ID: 2018-05-04-17-4 AASHTO T84-14 (Verified)
DIME Test ID: 2018-05-04-17-5 AASHTO T96-02r10 (Verified)
DIME Test ID: 2018-05-04-17-6 AASHTO T176-08 (Verified)
DIME Test ID: 2018-05-04-17-7 AASHTO T210-15 (Verified)
DIME Test ID: 2018-05-04-17-8 AASHTO T304-11 (Verified)
DIME Test ID: 2018-05-04-17-9 ASTM D4791-10 (Verified)