DIME - Sample Record for DIME Sample ID 2018-12-28-3

DIME » All Projects » Project - DEA: 07288604 » Sample 2018-12-28-3 » Sample Details

Sample Record

Owner Lab

CT - Unassigned/General Field Laboratory

DIME Sample ID 2018-12-28-3

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 208945 DEA: 07288604 EFIS: 0700021080 COOP: 074663
DIST-CO-RTE-PM	07-LA-710-6.0-9.4
Award Date	09/02/2011
Closeout Date	Not set
Work Description	Gerald Desmond Bridge Replacement - A Design Build project. IQA samples will be selected by Port/Caltrans representatives and sent to Translab for testing.
Location Description	Port of Long Beach (District 7)
QA Service Level	1 (Verified on 06/03/2013)

Sample Information

Sample Taken Date	12/28/2018	Sample Unique Key	3
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	01/17/2019
Sample type	Independent Assurance	A brief description of the sample	F3125 GR A325 Fastener Assembly
The quantity of what the sample constitutes	600	From where was the sample collected	Job Site
First name of sampler or witnessed by	William	Last name of sampler or witnessed by	Clifford
Title of sampler	INDEPENDENT QA	Telephone number of sampler	5103253065
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	Nucor	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form	L78-060-18	Structure unique identifier	Not set
Structure name	Not set

Material Information

Material Type	SMTL TM3 - Fastener Assembly	Rocap Number(s)	L1413003, L1413004
Heat Number(s)	412553BZ	Nut Mfg. Lot Number(s)	TN731
Washer Mfg. Lot Number(s)	D4996Z, D6240	Bolt Specification	F3125
Bolt Length(s)	3"	Nut Specification	A563 DH
Washer Specification	F436	Finish	Mech Galv
Diameter/Size	1"	Bolt Mfg. Lot Number	412553BZ
Rocap Test Requirement(s)		Lubricant Requirements(s)

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2018-12-28-3-1	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	01/23/2019	Fred	Yes	01/30/2019	A325
2018-12-28-3-2	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	01/23/2019	Fred	Yes	01/30/2019	A325
2018-12-28-3-3	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	01/23/2019	Fred	Yes	01/30/2019	Nut Proof Load
2018-12-28-3-4	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	01/23/2019	Fred	Yes	01/30/2019	Nut Proof Load
2018-12-28-3-5	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	01/23/2019	Fred Saylor	Yes	01/30/2019
2018-12-28-3-6	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	01/23/2019	Fred Saylor	Yes	01/30/2019
2018-12-28-3-7	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	01/23/2019	Fred Saylor	Yes	01/30/2019
2018-12-28-3-8	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	01/23/2019	Fred Saylor	Yes	01/30/2019
2018-12-28-3-9	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	01/23/2019	Fred Saylor	Yes	01/30/2019
2018-12-28-3-10	ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	01/23/2019	Fred Saylor	Yes	01/30/2019

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2018-12-28-3-1 ASTM F606-14a (Verified)
DIME Test ID: 2018-12-28-3-2 ASTM F606-14a (Verified)
DIME Test ID: 2018-12-28-3-3 ASTM F606-14a (Verified)
DIME Test ID: 2018-12-28-3-4 ASTM F606-14a (Verified)
DIME Test ID: 2018-12-28-3-5 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-12-28-3-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-12-28-3-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-12-28-3-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-12-28-3-9 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-12-28-3-10 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-12-28-3-11 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-12-28-3-12 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-12-28-3-13 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-12-28-3-14 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-12-28-3-15 ASTM B499-14 (Verified)
DIME Test ID: 2018-12-28-3-16 ASTM B499-14 (Verified)
DIME Test ID: 2018-12-28-3-17 ASTM B499-14 (Verified)
DIME Test ID: 2018-12-28-3-18 ASTM B499-14 (Verified)
DIME Test ID: 2018-12-28-3-19 ASTM B499-14 (Verified)
DIME Test ID: 2018-12-28-3-20 ASTM B499-14 (Verified)
DIME Test ID: 2018-12-28-3-21 ASTM B499-14 (Verified)
DIME Test ID: 2018-12-28-3-22 ASTM B499-14 (Verified)
DIME Test ID: 2018-12-28-3-23 ASTM B499-14 (Verified)
DIME Test ID: 2018-12-28-3-24 ASTM B499-14 (Verified)
DIME Test ID: 2018-12-28-3-25 ASTM B499-14 (Verified)
DIME Test ID: 2018-12-28-3-26 ASTM B499-14 (Verified)
DIME Test ID: 2018-12-28-3-27 ASTM B499-14 (Verified)
DIME Test ID: 2018-12-28-3-28 ASTM B499-14 (Verified)
DIME Test ID: 2018-12-28-3-29 ASTM B499-14 (Verified)
DIME Test ID: 2018-12-28-3-30 ASTM E18-15 (Verified)
DIME Test ID: 2018-12-28-3-31 ASTM E18-15 (Verified)
DIME Test ID: 2018-12-28-3-32 ASTM E18-15 (Verified)
DIME Test ID: 2018-12-28-3-33 ASTM E18-15 (Verified)
DIME Test ID: 2018-12-28-3-34 ASTM E18-15 (Verified)