Sample Record

Owner Lab

  • CT D02 - North Region Materials Lab

DIME Sample ID 2018-05-22-16

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 212997
DEA: 023H2104
EFIS: 0217000070
DIST-CO-RTE-PM02-PLU-70,89-53.5/58.4,21.0/29.9
Award Date03/02/2018
Closeout Date01/09/2019
Work DescriptionAC OVERLAY, REPLACE AC SURFACE, GUARDRAIL, SHOULDER BACKING
Location DescriptionPLUMAS COUNTY ON ROUTE 70 FROM GREENHORN RANCH ROAD TO 0.2 MILE EAST OF SLOAT ROAD AND ON ROUTE 89 FROM 0.3 MILE SOUTH OF ALTA CAMP ROAD TO CANYON DAM PICNIC AREA
QA Service Level1 (Verified on 02/02/2018)

Sample Information

Sample Taken Date05/22/2018 Sample Unique Key16
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing05/23/2018
Sample typeVerification A brief description of the sampleSized Virgin Aggregates
The quantity of what the sample constitutesJMF Verification From where was the sample collectedSource
First name of sampler or witnessed byCheryl Last name of sampler or witnessed byAbraham
Title of samplerUnknown Telephone number of samplerUnknown
Laboratory sample identificationD77414 Linked DIME Sample IDUnknown
The fabricator/manufacturer/facility nameLockwood Quarry Transportation Laboratory (TL) Number894817
Inspector Lot Number from the Transportation Laboratory (TL) FormJMF 18-13-S1 Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeAggregate Source Identification (SMARA or name of Pit)Lockwood Quarry (NV)
The fabricator's/manufacturer's product name for the sampleUnknown The fabricator/manufacturer designation for the sample3866
The plant numberUnknown A detailed description of where the material sample was collectedLab-Batched from Sized Untreated Aggregate Stockpiles
Where the material sample would have been placed if not sampledUnknown Primary Aggregate Nominal Size3/8 inch
The concrete mix design numberJMF 18-13-S1 Lot numberNot set
Sublot numberNot set JMF Verification ID JMF3513-2018-44
HMA PayNo

Submitted Tests

DIME Test IDTest MethodTester NameTesting LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2018-05-22-16-1CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index)Mike CruzCT D02 - North Region Materials Lab06/20/2018Ward Jenkins
Yes
11/26/2018
2018-05-22-16-2AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Colt SweenyCT D02 - North Region Materials Lab06/20/2018Ward Jenkins
Yes
11/26/2018
2018-05-22-16-3AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)Mike CruzCT D02 - North Region Materials Lab06/21/2018Ward Jenkins
Yes
11/26/2018
2018-05-22-16-4AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)Dennis HickeyCT D02 - North Region Materials Lab06/26/2018Ward Jenkins
Yes
11/26/2018
2018-05-22-16-5AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Colt SweenyCT D02 - North Region Materials Lab06/21/2018Ward Jenkins
Yes
11/26/2018
2018-05-22-16-6AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Mike CruzCT D02 - North Region Materials Lab06/20/2018Ward Jenkins
Yes
11/26/2018
2018-05-22-16-7AASHTO T210-15: Standard Method of Test for Aggregate Durability Index (Durability Index)Mike CruzCT D02 - North Region Materials Lab06/20/2018Ward Jenkins
Yes
11/26/2018
2018-05-22-16-8AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Ward JenkinsCT D02 - North Region Materials Lab06/20/2018Ward Jenkins
Yes
11/26/2018
2018-05-22-16-9ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Mike CruzCT D02 - North Region Materials Lab06/20/2018Ward Jenkins
Yes
11/26/2018