Sample Record
Owner Lab
- CT HQ - Sacramento Cement Testing Laboratory
DIME Sample ID 2018-11-01-3
Sample is locked from editing. info
Project Information
Project Identifiers | Project ID: 88888 DEA: SMTL-STOCK EFIS: SMTL-STOCK |
---|---|
DIST-CO-RTE-PM | 59--- |
Award Date | Not set |
Closeout Date | Not set |
Work Description | Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680. |
Location Description | Not set |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 11/01/2018 | Sample Unique Key | 3 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 11/01/2018 |
Sample type | Annual Source Testing | A brief description of the sample | Class F Flyash |
The quantity of what the sample constitutes | 1 Bucket | From where was the sample collected | Source |
First name of sampler or witnessed by | Unknown | Last name of sampler or witnessed by | Unknown |
Title of sampler | Unknown | Telephone number of sampler | Unknown |
Laboratory sample identification | CM185842 | Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | Charah | Transportation Laboratory (TL) Number | Unknown |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown | Structure unique identifier | Not set |
Structure name | Not set |
Material Information
Material Type | Cementitious | Brand | Charah |
---|---|---|---|
Mill | Dynegy Miami Fort 7 | Type of Cementitious Material | Class F or N Flyash |
Submitted Tests
DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
---|---|---|---|---|---|---|---|---|
2018-11-01-3-2 | THIS TEST HAS BEEN SUPERSEDED. ASTM C109-11: Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens) | SD, CT HQ - Sacramento Cement Testing Laboratory | 02/26/2019 | Yes | 07/17/2020 | THIS TEST HAS BEEN SUPERSEDED. 7 Day Break | ||
2018-11-01-3-3 | THIS TEST HAS BEEN SUPERSEDED. ASTM C109-11: Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens) | SD, CT HQ - Sacramento Cement Testing Laboratory | 03/19/2019 | Yes | 07/17/2020 | THIS TEST HAS BEEN SUPERSEDED. 28 Day Break | ||
2018-11-01-3-4 | ASTM C430-8: Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve | Stephen Donnelly, CT HQ - Sacramento Cement Testing Laboratory | 11/05/2018 | Stephen Donnelly | Yes | 07/17/2020 | ||
2018-11-01-3-5 | ASTM C109-16a: Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) | Benjamin Lenz, CT HQ - Sacramento Cement Testing Laboratory | 02/26/2018 | Benjamin Lenz | Yes | 07/17/2020 | ||
2018-11-01-3-6 | ASTM C109-16a: Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) | Benjamin Lenz, CT HQ - Sacramento Cement Testing Laboratory | 03/19/2018 | Benjamin Lenz | Yes | 07/17/2020 | Specimen 2 outside allowable limits. Two cube average presented. | |
2018-11-01-3-7 | ASTM C109-11: Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens) | SD, CT HQ - Sacramento Cement Testing Laboratory | 02/26/2019 | Benjamin Lenz | No | Report of test superseded since no control strengths were included. | Info | |
2018-11-01-3-8 | ASTM C109-11: Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens) | SD, CT HQ - Sacramento Cement Testing Laboratory | 03/19/2019 | Benjamin Lenz | No | Results report superseded since no control strengths were used. | Info |
Sample File Attachments
File Name | Extension | Date Uploaded | Actions |
---|---|---|---|
No results found. |
Test File Attachments
DIME Test ID: 2018-11-01-3-2 ASTM C109-11 (Verified)
DIME Test ID: 2018-11-01-3-3 ASTM C109-11 (Verified)
DIME Test ID: 2018-11-01-3-4 ASTM C430-8 (Verified)
DIME Test ID: 2018-11-01-3-5 ASTM C109-16a (Verified)
DIME Test ID: 2018-11-01-3-6 ASTM C109-16a (Verified)
DIME Test ID: 2018-11-01-3-7 ASTM C109-11
DIME Test ID: 2018-11-01-3-8 ASTM C109-11