DIME - Sample Record for DIME Sample ID 2018-10-23-2

DIME » All Projects » Project - DEA: 024E6504 » Sample 2018-10-23-2 » Sample Details

Sample Record

Owner Lab

CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2018-10-23-2

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 211775 DEA: 024E6504 EFIS: 0212000012
DIST-CO-RTE-PM	02-SIS-96-R52.5/88.4
Award Date	07/10/2017
Closeout Date	01/05/2021
Work Description	WIDEN BRIDGES,POLYESTER CONC OVERLAY,COLD PLANE AC PVMT,HMA,GUARDRAIL
Location Description	SISKIYOU COUNTY NEAR SEIAD VALLEY AT VARIOUS LOCATIONS FROM 0.1 MILE WEST OF THOMPSON CREEK BRIDGE TO 0.2 MILE EAST OF BEAVER CREEK BRIDGE
QA Service Level	1 (Verified on 08/23/2017)

Sample Information

Sample Taken Date	10/23/2018	Sample Unique Key	2
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	10/26/2018
Sample type	Quality Assurance	A brief description of the sample	7/8x2 1/4, 7/8x3 1/4, 7/8x3 1/2
The quantity of what the sample constitutes	96, 46, 28	From where was the sample collected	Fabricator
First name of sampler or witnessed by	Kevin	Last name of sampler or witnessed by	Muser
Title of sampler	QA	Telephone number of sampler	9165170532
Laboratory sample identification	Unknown	Linked DIME Sample ID	Unknown
The fabricator/manufacturer/facility name	CK Johnson	Transportation Laboratory (TL) Number	Unknown
Inspector Lot Number from the Transportation Laboratory (TL) Form	S19-570-18	Structure unique identifier	Not set
Structure name	Not set

Material Information

Material Type	SMTL TM3 - Fastener Assembly	Rocap Number(s)	R390328A, R395568A, R400708A
Heat Number(s)	100885409, 100885408, DL17102851	Nut Mfg. Lot Number(s)	390328A, 395568A, 400708A
Washer Mfg. Lot Number(s)		Bolt Specification	A325
Bolt Length(s)	2 1/4, 3 1/4, 3 1/2	Nut Specification	A563 DH
Washer Specification	F436	Finish	HDG
Diameter/Size	7/8x2 1/4, 7/8x3 1/4, 7/8x3 1/2	Bolt Mfg. Lot Number
Rocap Test Requirement(s)	Yes	Lubricant Requirements(s)	Yes

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2018-10-23-2-1	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	10/29/2018	Fred	Yes	11/06/2018	A325
2018-10-23-2-2	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	10/29/2018	Fred	Yes	11/06/2018	A325
2018-10-23-2-3	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	10/29/2018	Fred	Yes	11/06/2018	Nut Proof Load
2018-10-23-2-4	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	10/30/2018	Fred Saylor	Yes	11/06/2018
2018-10-23-2-5	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	10/30/2018	Fred Saylor	Yes	11/06/2018
2018-10-23-2-6	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	10/30/2018	Fred Saylor	Yes	11/06/2018
2018-10-23-2-7	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	10/30/2018	Fred Saylor	Yes	11/06/2018
2018-10-23-2-8	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	10/30/2018	Fred Saylor	Yes	11/06/2018
2018-10-23-2-9	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	10/30/2018	Fred Saylor	Yes	11/06/2018
2018-10-23-2-10	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	10/30/2018	Fred Saylor	Yes	11/06/2018

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2018-10-23-2-1 ASTM F606-14a (Verified)
DIME Test ID: 2018-10-23-2-2 ASTM F606-14a (Verified)
DIME Test ID: 2018-10-23-2-3 ASTM F606-14a (Verified)
DIME Test ID: 2018-10-23-2-4 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-10-23-2-5 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-10-23-2-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-10-23-2-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-10-23-2-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-10-23-2-9 ASTM B499-14 (Verified)
DIME Test ID: 2018-10-23-2-10 ASTM B499-14 (Verified)
DIME Test ID: 2018-10-23-2-11 ASTM B499-14 (Verified)
DIME Test ID: 2018-10-23-2-12 ASTM B499-14 (Verified)
DIME Test ID: 2018-10-23-2-13 ASTM B499-14 (Verified)
DIME Test ID: 2018-10-23-2-14 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-10-23-2-15 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-10-23-2-16 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-10-23-2-17 ASTM B499-14 (Verified)
DIME Test ID: 2018-10-23-2-18 ASTM B499-14 (Verified)
DIME Test ID: 2018-10-23-2-19 ASTM B499-14 (Verified)
DIME Test ID: 2018-10-23-2-20 ASTM B499-14 (Verified)
DIME Test ID: 2018-10-23-2-21 ASTM B499-14 (Verified)
DIME Test ID: 2018-10-23-2-22 ASTM B499-14 (Verified)
DIME Test ID: 2018-10-23-2-23 ASTM B499-14 (Verified)
DIME Test ID: 2018-10-23-2-24 ASTM B499-14 (Verified)
DIME Test ID: 2018-10-23-2-25 ASTM E18-15 (Verified)
DIME Test ID: 2018-10-23-2-26 ASTM E18-15 (Verified)
DIME Test ID: 2018-10-23-2-27 ASTM E18-15 (Verified)