Sample Record

Owner Lab

  • CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2018-09-26-10

Project Information

Project IdentifiersProject ID: 212741
DEA: 020E1804
EFIS: 0200000022
DIST-CO-RTE-PM02-PLU-89-29.8/30.2
Award Date12/13/2017
Closeout Date12/17/2021
Work DescriptionBRIDGE REPLACEMENT
Location DescriptionPLUMAS COUNTY NEAR CANYON DAM FROM 0.2 MILE SOUTH TO 0.3 MILE NORTH OF LAKE ALMANOR SPILLWAY
QA Service Level1 (Verified on 12/06/2017)

Sample Information

Sample Taken Date09/26/2018 Sample Unique Key10
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing06/27/2018
Sample typeDepartment Acceptance A brief description of the samplePSE, 3/4 HMA A, PG64-28m
The quantity of what the sample constitutesPSE 16 boxs From where was the sample collectedManufacturer
First name of sampler or witnessed byJeremy Last name of sampler or witnessed byCGI
Title of samplerCGI Telephone number of samplerUnknown
Laboratory sample identificationD77667 Linked DIME Sample IDUnknown
The fabricator/manufacturer/facility nameDig-It Transportation Laboratory (TL) NumberT101 C678055
Inspector Lot Number from the Transportation Laboratory (TL) FormT101 C678055 Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading3/4 inch Lot numberNot set
Sublot numberNot set HMA Mix NumberNot set
HMA PayNo

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2018-09-26-10-1AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Terry McCormick, CT D02 - Redding Northern Regional Laboratory09/27/2018Terry McCormick
No
PSE, 3/4 HMA A, 15% rap, PG64-28m Albina Info
2018-09-26-10-2AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Terry McCormick, CT D02 - Redding Northern Regional Laboratory09/28/2018Terry McCormick
No
PSE, 3/4 HMA A, 15% rap, PG64-28m Albina Info
2018-09-26-10-3AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Terry McCormick, CT D02 - Redding Northern Regional Laboratory10/01/2018Terry McCormick
No
PSE, 3/4 HMA A, 15% rap, PG64-28m Albina Info
2018-09-26-10-4AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Terry McCormick, CT D02 - Redding Northern Regional Laboratory10/01/2018Terry McCormick
No
PSE, 3/4 HMA A, 15% rap, PG64-28m Albina Info
2018-09-26-10-5AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track)Terry McCormick, CT D02 - Redding Northern Regional Laboratory10/09/2018Terry McCormick
No
PSE, 3/4 HMA A, 15% rap, PG64-28m Albina Info
2018-09-26-10-6AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Terry McCormick, CT D02 - Redding Northern Regional Laboratory10/10/2018Terry McCormick
No
PSE, 3/4 HMA A, 15% rap, PG64-28m Albina Info

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2018-09-26-10-1 AASHTO T209-12
DIME Test ID: 2018-09-26-10-2 AASHTO T308-10
DIME Test ID: 2018-09-26-10-3 AASHTO T275-07r12
DIME Test ID: 2018-09-26-10-4 AASHTO T269-14
DIME Test ID: 2018-09-26-10-5 AASHTO T324-14
DIME Test ID: 2018-09-26-10-6 AASHTO T283-14