Sample Record

Owner Lab

  • CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2018-08-28-5

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 213134
DEA: 024F77U4
EFIS: 0217000022
DIST-CO-RTE-PM02-MOD-299-23.1/23.6, 24.5/33.5
Award Date05/08/2018
Closeout Date09/02/2020
Work DescriptionBRIDGE REPLACE, ROADWAY REHAB/FULL DEPTH RECLAMATION-CEMENT + HMA
Location DescriptionMODOC COUNTY ABOUT 6 MILES WEST OF ALTURAS FROM 0.3 MILE WEST TO 0.3 MILE EAST OF CALDWELL CREEK BRIDGE AND 1.1 MILES EAST OF CALDWELL CREEK BRIDGE TO 1.7 MILES WEST OF COUNTY ROAD 75
QA Service Level1 (Verified on 04/02/2018)

Sample Information

Sample Taken Date08/28/2018 Sample Unique Key5
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing08/28/2018
Sample typeVerification A brief description of the sampleSized Virgin Aggregates
The quantity of what the sample constitutesJMF Verification From where was the sample collectedManufacturer
First name of sampler or witnessed byx Last name of sampler or witnessed byx
Title of samplerUnknown Telephone number of samplerUnknown
Laboratory sample identificationD77624 Linked DIME Sample IDUnknown
The fabricator/manufacturer/facility nameHat Creek - Shaw Pit Facility Transportation Laboratory (TL) NumberUnknown
Inspector Lot Number from the Transportation Laboratory (TL) FormJMF 18-18-S1 Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-25-0008::SHAW PIT
The fabricator's/manufacturer's product name for the sampleUnknown The fabricator/manufacturer designation for the sampleUnknown
The plant numberUnknown A detailed description of where the material sample was collectedLaboratory Batched
Where the material sample would have been placed if not sampledUnknown Primary Aggregate Nominal Size3/4 inch
The concrete mix design numberJMF 18-18-S1 Lot numberNot set
Sublot numberNot set Aggregate Mix NumberNot set
HMA PayNo

JMF Information

Verification IDJMF3513-2018-35 Date Created09/20/2018
JMF Submittal IDJMF3511-22-2018-48 JMF StatusSubmittal Rejected For Use
Producer Mix ID18-1278.96-LAS Rejected Date09/21/2018

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2018-08-28-5-1CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index)Mike Cruz, CT D02 - Redding Northern Regional Laboratory09/12/2018Ward Jenkins
Yes
09/20/2018
2018-08-28-5-2AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Colt Sweeny, CT D02 - Redding Northern Regional Laboratory09/11/2018Ward Jenkins
Yes
09/20/2018
2018-08-28-5-3AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)Darrell Valasek, CT D02 - Redding Northern Regional Laboratory09/12/2018Ward Jenkins
Yes
09/20/2018
2018-08-28-5-4AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)Dennis Hickey, CT D02 - Redding Northern Regional Laboratory09/13/2018Ward Jenkins
Yes
09/20/2018
2018-08-28-5-5AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Dennis Hickey, CT D02 - Redding Northern Regional Laboratory09/11/2018Ward Jenkins
Yes
09/20/2018
2018-08-28-5-6AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Terry McCormick, CT D02 - Redding Northern Regional Laboratory09/12/2018Ward Jenkins
Yes
09/20/2018
2018-08-28-5-7AASHTO T210-15: Standard Method of Test for Aggregate Durability Index (Durability Index)Darrell Valasek, CT D02 - Redding Northern Regional Laboratory09/11/2018Ward Jenkins
Yes
09/20/2018
2018-08-28-5-8AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Mike Cruz, CT D02 - Redding Northern Regional Laboratory09/12/2018Ward Jenkins
Yes
09/20/2018
2018-08-28-5-9ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Mike Cruz, CT D02 - Redding Northern Regional Laboratory09/11/2018Ward Jenkins
Yes
09/20/2018

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2018-08-28-5-1 CTM 204-June 2010 (Verified)
DIME Test ID: 2018-08-28-5-2 AASHTO T335-09r13 (Verified)
DIME Test ID: 2018-08-28-5-3 AASHTO T85-13 (Verified)
DIME Test ID: 2018-08-28-5-4 AASHTO T84-14 (Verified)
DIME Test ID: 2018-08-28-5-5 AASHTO T96-02r10 (Verified)
DIME Test ID: 2018-08-28-5-6 AASHTO T176-08 (Verified)
DIME Test ID: 2018-08-28-5-7 AASHTO T210-15 (Verified)
DIME Test ID: 2018-08-28-5-8 AASHTO T304-11 (Verified)
DIME Test ID: 2018-08-28-5-9 ASTM D4791-10 (Verified)