Sample Record

Owner Lab

  • CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2018-05-15-26

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 212562
DEA: 024G5504
EFIS: 0214000036
DIST-CO-RTE-PM02-SIS-5-2.7/R11.4
Award Date03/12/2018
Closeout Date10/05/2020
Work DescriptionRECONSTRUCT WITH HMA AND PCC, WIDEN STRUCTURE AND UPGRADE RAILS
Location DescriptionSISKIYOU COUNTY IN AND NEAR DUNSMUIR FROM SACRAMENTO RIVER BRIDGE TO 0.6 MILE SOUTH OF NORTH MOUNT SHASTA UNDERPASS
QA Service Level1 (Verified on 04/04/2018)

Sample Information

Sample Taken Date05/15/2018 Sample Unique Key26
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing04/25/2018
Sample typeVerification A brief description of the sampleCombined Untreated Virgin 3/4-inch Type A Aggregate
The quantity of what the sample constitutesJMF Verification From where was the sample collectedSource
First name of sampler or witnessed byDerrick Last name of sampler or witnessed byCurry
Title of samplerTech Telephone number of samplerUnknown
Laboratory sample identificationD77341F Linked DIME Sample IDUnknown
The fabricator/manufacturer/facility nameJ F Shea Construction Inc - Fawndale Rock and Asphalt - Redding CA Transportation Laboratory (TL) Number001555
Inspector Lot Number from the Transportation Laboratory (TL) Form18-03-S3 Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA or name of Pit)91-45-0017::FAWNDALE ROCK QUARRY
The fabricator's/manufacturer's product name for the sampleUnknown The fabricator/manufacturer designation for the sampleUnknown
The plant numberUnknown A detailed description of where the material sample was collectedLaboratory Batched
Where the material sample would have been placed if not sampledUnknown Primary Aggregate Nominal Size3/4 inch
The concrete mix design number18-1001 305-23 6 Lot numberUnknown
Sublot numberUnknown Aggregate Mix NumberNot set
HMA PayNo

JMF Information

Verification IDJMF3513-2018-23 Date Created07/19/2018
JMF Submittal IDJMF3511-22-2018-38 JMF StatusSubmittal Authorized For Use
Producer Mix ID18-1001.305-23.6% Authorized Date07/31/2018

Submitted Tests

DIME Test IDTest MethodTester NameTesting LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2018-05-15-26-1AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)NRML-RCT D02 - Redding Northern Regional Laboratory04/30/2018Ward Jenkins
Yes
07/30/2018
2018-05-15-26-2CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index)Mike CruzCT D02 - Redding Northern Regional Laboratory05/22/2018Ward Jenkins
Yes
07/30/2018
2018-05-15-26-3AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Colt SweenyCT D02 - Redding Northern Regional Laboratory05/22/2018Ward Jenkins
Yes
07/30/2018
2018-05-15-26-4AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)Mike CruzCT D02 - Redding Northern Regional Laboratory05/25/2018Ward Jenkins
Yes
07/30/2018
2018-05-15-26-5AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)Dennis HickeyCT D02 - Redding Northern Regional Laboratory05/23/2018Ward Jenkins
Yes
07/30/2018
2018-05-15-26-6AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Colt SweenyCT D02 - Redding Northern Regional Laboratory05/22/2018Ward Jenkins
Yes
07/30/2018
2018-05-15-26-7AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Mike CruzCT D02 - Redding Northern Regional Laboratory05/22/2018Ward Jenkins
Yes
07/30/2018
2018-05-15-26-8AASHTO T210-15: Standard Method of Test for Aggregate Durability Index (Durability Index)Mike CruzCT D02 - Redding Northern Regional Laboratory05/22/2018Ward Jenkins
Yes
07/30/2018
2018-05-15-26-9AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Mike CruzCT D02 - Redding Northern Regional Laboratory05/22/2018Ward Jenkins
Yes
07/30/2018
2018-05-15-26-10ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Mike CruzCT D02 - Redding Northern Regional Laboratory05/22/2018Ward Jenkins
Yes
07/30/2018

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2018-05-15-26-1 AASHTO T27-14 (Verified)
DIME Test ID: 2018-05-15-26-2 CTM 204-June 2010 (Verified)
DIME Test ID: 2018-05-15-26-3 AASHTO T335-09r13 (Verified)
DIME Test ID: 2018-05-15-26-4 AASHTO T85-13 (Verified)
DIME Test ID: 2018-05-15-26-5 AASHTO T84-14 (Verified)
DIME Test ID: 2018-05-15-26-6 AASHTO T96-02r10 (Verified)
DIME Test ID: 2018-05-15-26-7 AASHTO T176-08 (Verified)
DIME Test ID: 2018-05-15-26-8 AASHTO T210-15 (Verified)
DIME Test ID: 2018-05-15-26-9 AASHTO T304-11 (Verified)
DIME Test ID: 2018-05-15-26-10 ASTM D4791-10 (Verified)