Owner Lab
- CT HQ - Sacramento Cement Testing Laboratory
DIME Sample ID 2018-07-18-6
Sample is locked from editing. info
Project Information
Project Identifiers | Project ID: 88888 DEA: STOCK EFIS: STOCK |
DIST-CO-RTE-PM | 59--- |
Award Date | Not set |
Closeout Date | Not set |
Work Description | Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680. |
Location Description | Not set |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 07/18/2018 |
Sample Unique Key | 6 |
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 07/18/2018 |
Sample type | Annual Source Testing |
A brief description of the sample | Type 1P |
The quantity of what the sample constitutes | 1 Bucket |
From where was the sample collected | Source |
First name of sampler or witnessed by | Unknown |
Last name of sampler or witnessed by | Unknown |
Title of sampler | Unknown |
Telephone number of sampler | Unknown |
Laboratory sample identification | CM185820 |
Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | Nevada Cement |
Transportation Laboratory (TL) Number | Unknown |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown |
Structure unique identifier | Not set |
Structure name | Not set |
---|
Material Information
Material Type | Cementitious |
Brand | Nevada Cement |
Mill | Fernley Nevada |
Type of Cementitious Material | Blended Cement |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
2018-07-18-6-2 | ASTM C109-11: Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens) | BL | CT HQ - Sacramento Cement Testing Laboratory | 02/15/2019 | | Yes | 03/22/2019 | 3 Day Break -- Specimen 3 break was outside allowable range. Correct final result is 2910 PSI. | |
2018-07-18-6-3 | ASTM C109-11: Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens) | BL | CT HQ - Sacramento Cement Testing Laboratory | 02/19/2019 | | Yes | 03/22/2019 | 7 Day Break -- Specimen 3 break was outside allowable range. Correct final result is 3570 PSI. | |
2018-07-18-6-4 | ASTM C109-11: Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens) | BL | CT HQ - Sacramento Cement Testing Laboratory | 03/12/2019 | | Yes | 03/22/2019 | 28 Day Break | |
2018-07-18-6-5 | ASTM C185-15a: Standard Test Method for Air Content of Hydraulic Cement Mortar | Stephen Donnelly | CT HQ - Sacramento Cement Testing Laboratory | 09/07/2018 | Stephen Donnelly | Yes | 03/22/2019 | | |
2018-07-18-6-6 | ASTM C188-15: Standard Test Method for Density of Hydraulic Cement | Stephen Donnelly | CT HQ - Sacramento Cement Testing Laboratory | 09/07/2018 | Stephen Donnelly | Yes | 03/22/2019 | | |
2018-07-18-6-7 | ASTM C191-13: Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle | Stephen Donnelly | CT HQ - Sacramento Cement Testing Laboratory | 08/29/2018 | Stephen Donnelly | Yes | 03/22/2019 | | |
2018-07-18-6-8 | ASTM C204-11: Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus | Benjamin Lenz | CT HQ - Sacramento Cement Testing Laboratory | 02/06/2019 | Benjamin Lenz | Yes | 03/22/2019 | | |
2018-07-18-6-9 | ASTM C430-8: Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve | Stephen Donnelly | CT HQ - Sacramento Cement Testing Laboratory | 09/28/2018 | Stephen Donnelly | Yes | 03/22/2019 | | |
5593855997568754956849567491145578850172