Sample Record
Owner Lab
- CT D02 - Redding Northern Regional Laboratory
DIME Sample ID 2018-05-24-8
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 212562 DEA: 024G5504 EFIS: 0214000036 |
|---|---|
| DIST-CO-RTE-PM | 02-SIS-5-2.7/R11.4 |
| Award Date | 03/12/2018 |
| Closeout Date | 10/05/2020 |
| Work Description | RECONSTRUCT WITH HMA AND PCC, WIDEN STRUCTURE AND UPGRADE RAILS |
| Location Description | SISKIYOU COUNTY IN AND NEAR DUNSMUIR FROM SACRAMENTO RIVER BRIDGE TO 0.6 MILE SOUTH OF NORTH MOUNT SHASTA UNDERPASS |
| QA Service Level | 1 (Verified on 04/04/2018) |
Sample Information
| Sample Taken Date | 05/24/2018 | Sample Unique Key | 8 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/24/2018 |
| Sample type | Department Acceptance | A brief description of the sample | JMF virgin aggregate 3 bins |
| The quantity of what the sample constitutes | JMF 9 bags | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Chandler | Last name of sampler or witnessed by | Faeth |
| Title of sampler | CGI | Telephone number of sampler | Unknown |
| Laboratory sample identification | D77421 | Linked DIME Sample ID | Unknown |
| The fabricator/manufacturer/facility name | JF Shea Fawndale | Transportation Laboratory (TL) Number | T101 C897216 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | T101 C897216 | Structure unique identifier | Not set |
| Structure name | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | unknown |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | JMF Virgin agggregate 3 bins | The fabricator/manufacturer designation for the sample | Unknown |
| The plant number | Unknown | A detailed description of where the material sample was collected | Plant |
| Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 3/4 inch |
| The concrete mix design number | Unknown | Lot number | Not set |
| Sublot number | Not set | Aggregate Mix Number | Not set |
| HMA Pay | No |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
|---|---|---|---|---|---|---|---|---|
| 2018-05-24-8-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 05/25/2018 | Terry McCormick | No | JMF, 3/4 virgin aggregate, Bin A | Info | |
| 2018-05-24-8-2 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 05/25/2018 | Terry McCormick | No | JMF, 3/8 virgin aggregate, Bin B | Info | |
| 2018-05-24-8-3 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 05/25/2018 | Terry McCormick | No | JMF, plant sand virgin aggregate, Bin C | Info | |
| 2018-05-24-8-4 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 06/22/2018 | Terry McCormick | No | JMF, Virgin aggregate quality testing | Info | |
| 2018-05-24-8-5 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 06/20/2018 | Terry McCormick | No | JMF, Virgin aggregate quality testing | Info | |
| 2018-05-24-8-6 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 06/19/2018 | Terry McCormick | No | JMF, Virgin aggregate quality testing | Info | |
| 2018-05-24-8-7 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 06/20/2018 | Terry McCormick | No | JMF, Virgin aggregate quality testing | Info | |
| 2018-05-24-8-8 | CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 06/20/2018 | Terry McCormick | No | JMF, Virgin aggregate quality testing | Info | |
| 2018-05-24-8-9 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 06/20/2018 | Terry McCormick | No | JMF, Virgin aggregate quality testing | Info | |
| 2018-05-24-8-10 | AASHTO T210-15: Standard Method of Test for Aggregate Durability Index (Durability Index) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 06/20/2018 | Terry McCormick | No | JMF, Virgin aggregate quality testing | Info |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2018-05-24-8-1 AASHTO T27-14
DIME Test ID: 2018-05-24-8-2 AASHTO T27-14
DIME Test ID: 2018-05-24-8-3 AASHTO T27-14
DIME Test ID: 2018-05-24-8-4 AASHTO T84-14
DIME Test ID: 2018-05-24-8-5 AASHTO T304-11
DIME Test ID: 2018-05-24-8-6 AASHTO T96-02r10
DIME Test ID: 2018-05-24-8-7 AASHTO T85-13
DIME Test ID: 2018-05-24-8-8 CTM 204-June 2010
DIME Test ID: 2018-05-24-8-9 AASHTO T176-08
DIME Test ID: 2018-05-24-8-10 AASHTO T210-15
DIME Test ID: 2018-05-24-8-11 AASHTO T335-09r13
DIME Test ID: 2018-05-24-8-12 ASTM D4791-10