DIME - Sample Record for DIME Sample ID 2018-05-25-3

DIME » All Projects » Project - DEA: 044K8504 » Sample 2018-05-25-3 » Sample Details

Sample Record

Owner Lab

CT HQ - QASI Sacramento Field Office

DIME Sample ID 2018-05-25-3

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 212354 DEA: 044K8504 EFIS: 0417000378
DIST-CO-RTE-PM	04-MRN,MTRN-1-22.8, 22.80
Award Date	06/21/2017
Closeout Date	12/16/2021
Work Description	Giacomini Creek Bridge, Construct sheet pile wall, replace culvert
Location Description	ROUTE 1, AT POSTMILE 22.8, NEAR BOLINAS, AT 0.52 MILES NORTH OF HORSESHOE HILL RD., MARIN COUNTY SLIPOUT, CONSTRUCT SOLDIER PILE WALL
QA Service Level	1 (Verified on 05/01/2017)

Sample Information

Sample Taken Date	05/25/2018	Sample Unique Key	3
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	05/25/2018
Sample type	Quality Assurance	A brief description of the sample	3/4 X 4-1/2, 3/4 X 5-1/2, 7/8 X 19-1/2
The quantity of what the sample constitutes	Lot of 28	From where was the sample collected	Fabricator
First name of sampler or witnessed by	Scott	Last name of sampler or witnessed by	Leavitt
Title of sampler	QA Inspector	Telephone number of sampler	510 590-0116
Laboratory sample identification	Unknown	Linked DIME Sample ID	Unknown
The fabricator/manufacturer/facility name	Portland Bolt Manufacturing	Transportation Laboratory (TL) Number	Unknown
Inspector Lot Number from the Transportation Laboratory (TL) Form	S28-126-18	Structure unique identifier	Not set
Structure name	Not set

Material Information

Material Type	SMTL TM3 - Fastener Assembly	Rocap Number(s)	110135-1, 110135-2
Heat Number(s)	NF16100667, 10483100, 3065481	Nut Mfg. Lot Number(s)	400279E
Washer Mfg. Lot Number(s)	0118-742	Bolt Specification	A325, A325, A449
Bolt Length(s)	4-1/2, 5-1/2, 19-1/2	Nut Specification	A563DH
Washer Specification	F436-1	Finish	HDG, HDG, HDG
Diameter/Size	3/4, 3/4, 7/8	Bolt Mfg. Lot Number	Nucor, Fontana Fasteners, Portland Bolt
Rocap Test Requirement(s)	Yes, Yes, No	Lubricant Requirements(s)	Yes, Yes

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2018-05-25-3-1	ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	05/30/2018	Brian	Yes	06/07/2018	A449 Bolt
2018-05-25-3-2	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	05/30/2018	Brian	Yes	06/07/2018	A325
2018-05-25-3-3	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	05/30/2018	Brian	Yes	06/07/2018	A325
2018-05-25-3-4	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	05/30/2018	Brian	Yes	06/07/2018	Nut Proof Load
2018-05-25-3-5	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	05/30/2018	Brian	Yes	06/07/2018	Nut Proof Load
2018-05-25-3-6	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	05/31/2018	Fred Saylor	Yes	06/07/2018
2018-05-25-3-7	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	05/31/2018	Fred Saylor	Yes	06/07/2018
2018-05-25-3-8	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	05/31/2018	Fred Saylor	Yes	06/07/2018
2018-05-25-3-9	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	05/31/2018	Fred Saylor	Yes	06/07/2018
2018-05-25-3-10	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	05/31/2018	Fred Saylor	Yes	06/07/2018

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2018-05-25-3-1 ASTM F606-14 (Verified)
DIME Test ID: 2018-05-25-3-2 ASTM F606-14a (Verified)
DIME Test ID: 2018-05-25-3-3 ASTM F606-14a (Verified)
DIME Test ID: 2018-05-25-3-4 ASTM F606-14a (Verified)
DIME Test ID: 2018-05-25-3-5 ASTM F606-14a (Verified)
DIME Test ID: 2018-05-25-3-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-25-3-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-25-3-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-25-3-9 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-25-3-10 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-25-3-11 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-25-3-12 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-25-3-13 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-25-3-14 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-25-3-15 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-25-3-16 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-25-3-17 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-25-3-18 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-25-3-19 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-25-3-20 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-25-3-21 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-25-3-22 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-25-3-23 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-25-3-24 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-25-3-25 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-25-3-26 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-25-3-27 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-25-3-28 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-25-3-29 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-25-3-30 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-25-3-31 ASTM E18-15 (Verified)
DIME Test ID: 2018-05-25-3-32 ASTM E18-15 (Verified)
DIME Test ID: 2018-05-25-3-33 ASTM E18-15 (Verified)