Sample Record
Owner Lab
- CT D02 - Redding Northern Regional Laboratory
DIME Sample ID 2018-05-15-21
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 212679 DEA: 023E7204 EFIS: 0200020154 |
|---|---|
| DIST-CO-RTE-PM | 02-TEH-36-42.1/46.0 |
| Award Date | 12/18/2017 |
| Closeout Date | 08/07/2019 |
| Work Description | COLD PLANING, PAVING, MINOR CONCRETE, ELECTRICAL AND STRIPING WORK. |
| Location Description | TEHAMA COUNTY IN AND NEAR RED BLUFF FROM EAST SAND SLOUGH BRIDGE TO 0.6 MILE EAST OF STICE ROAD |
| QA Service Level | 1 (Verified on 05/24/2018) |
Sample Information
| Sample Taken Date | 05/15/2018 | Sample Unique Key | 21 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/15/2018 |
| Sample type | Department Acceptance | A brief description of the sample | JMF virgin aggregate 4 bins |
| The quantity of what the sample constitutes | JMF 12 bags | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Michael | Last name of sampler or witnessed by | Allegretto |
| Title of sampler | Lab Tech | Telephone number of sampler | Unknown |
| Laboratory sample identification | D77390 | Linked DIME Sample ID | Unknown |
| The fabricator/manufacturer/facility name | Tullis Inc - Northstate Asphalt - Redding, CA | Transportation Laboratory (TL) Number | T101 C847538 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | T101 C847538 | Structure unique identifier | Not set |
| Structure name | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | Unknown |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | JMF Virgin agggregate 4 bins | The fabricator/manufacturer designation for the sample | Unknown |
| The plant number | Unknown | A detailed description of where the material sample was collected | Plant |
| Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 3/4 inch |
| The concrete mix design number | Unknown | Lot number | Not set |
| Sublot number | Not set | Aggregate Mix Number | Not set |
| HMA Pay | No |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
|---|---|---|---|---|---|---|---|---|
| 2018-05-15-21-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 05/18/2018 | Terry McCormick | No | JMF, 3/4 virgin aggregate, bin A | Info | |
| 2018-05-15-21-2 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 05/18/2018 | Terry McCormick | No | JMF, 1/2 virgin aggregate, Bin B | Info | |
| 2018-05-15-21-3 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 05/18/2018 | Terry McCormick | No | JMF, 3/8 virgin aggregate, bin C | Info | |
| 2018-05-15-21-4 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 05/18/2018 | Terry McCormick | No | JMF, fines virgin aggregate, Bin D | Info | |
| 2018-05-15-21-5 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 06/11/2018 | Terry McCormick | No | JMF, Virgin Aggregate quality test | Info | |
| 2018-05-15-21-6 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 06/12/2018 | Terry McCormick | No | JMF, Virgin Aggregate quality test | Info | |
| 2018-05-15-21-7 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 06/08/2018 | Terry McCormick | No | JMF, Virgin Aggregate quality test | Info | |
| 2018-05-15-21-8 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 06/08/2018 | Terry McCormick | No | JMF, Virgin Aggregate quality test | Info | |
| 2018-05-15-21-10 | CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 06/11/2018 | Terry McCormick | No | JMF, Virgin Aggregate quality test | Info | |
| 2018-05-15-21-11 | AASHTO T210-15: Standard Method of Test for Aggregate Durability Index (Durability Index) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 06/11/2018 | Terry McCormick | No | JMF, Virgin Aggregate quality test | Info |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2018-05-15-21-1 AASHTO T27-14
DIME Test ID: 2018-05-15-21-2 AASHTO T27-14
DIME Test ID: 2018-05-15-21-3 AASHTO T27-14
DIME Test ID: 2018-05-15-21-4 AASHTO T27-14
DIME Test ID: 2018-05-15-21-5 AASHTO T84-14
DIME Test ID: 2018-05-15-21-6 AASHTO T304-11
DIME Test ID: 2018-05-15-21-7 AASHTO T85-13
DIME Test ID: 2018-05-15-21-8 AASHTO T96-02r10
DIME Test ID: 2018-05-15-21-10 CTM 204-June 2010
DIME Test ID: 2018-05-15-21-11 AASHTO T210-15
DIME Test ID: 2018-05-15-21-12 AASHTO T176-08
DIME Test ID: 2018-05-15-21-13 AASHTO T335-09r13
DIME Test ID: 2018-05-15-21-14 ASTM D4791-10