Sample Record

Owner Lab

  • CT D02 - North Region Materials Lab

DIME Sample ID 2018-04-18-2

Project Information

Project IdentifiersProject ID: 212886
DEA: 023H1204
DIST-CO-RTE-PM02-TEH-5-R0.0/R22.4
Award Date01/03/2018
Closeout Date02/06/2019
Work DescriptionCOLD PLANE RAC-O, PLACE RHMA-O, REPLACE AC SURFACING, MBGR
Location DescriptionTEHAMA COUNTY AT AND NEAR CORNING FROM GLENN COUNTY LINE TO 0.3 MILE NORTH OF BRANCH COYOTE CREEK BRIDGE
QA Service Level1 (Verified on 01/08/2019)

Sample Information

Sample Taken Date04/18/2018 Sample Unique Key2
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing04/19/2018
Sample typeAcceptance A brief description of the sample3/4-inch A HMA 15rap PG64-28pm
The quantity of what the sample constitutesPSE From where was the sample collectedManufacturer
First name of sampler or witnessed byMichael Last name of sampler or witnessed byAllegretto
Title of samplerLab Tech Telephone number of samplerUnknown
Laboratory sample identificationD77333 Linked DIME Sample IDUnknown
The fabricator/manufacturer/facility nameTullis Inc - Northstate Asphalt - Redding, CA Transportation Laboratory (TL) NumberTL101 C896051
Inspector Lot Number from the Transportation Laboratory (TL) FormT101 C896051 Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading3/4 inch Lot numberNot set
Sublot numberNot set HMA Design ID
HMA PayNo

Submitted Tests

DIME Test IDTest MethodTester NameTesting LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2018-04-18-2-1AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Terry McCormickCT D02 - North Region Materials Lab04/20/2018Terry McCormick
No
PSE, 3/4 HMA A, 1.0% lime, 15.0%rap, PG64-28pm Valero Benicia Info
2018-04-18-2-2AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Terry McCormickCT D02 - North Region Materials Lab04/20/2018Terry McCormick
No
PSE, 3/4 HMA A, 1.0% lime, 15.0%rap, PG64-28pm Valero Benicia. Info
2018-04-18-2-3AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Terry McCormickCT D02 - North Region Materials Lab04/20/2018Terry McCormick
No
PSE, 3/4 HMA A, 1.0% lime, 15.0%rap, PG64-28pm Valero Benicia. Samples 4/20/ 2, 3, 4. Heights 114.6, 115.0, 115.2. Info
2018-04-18-2-4AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Asphalt Binder Content)Terry McCormickCT D02 - North Region Materials Lab04/20/2018Terry McCormick
No
PSE, 3/4 HMA A, 1.0% lime, 15.0%rap, PG64-28pm Valero Benicia. Info
2018-04-18-2-5AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track)Terry McCormickCT D02 - North Region Materials Lab04/25/2018Terry McCormick
No
PSE, 3/4 HMA A, 1.0% lime, 15.0%rap, PG64-28pm Valero Benicia. Info
2018-04-18-2-6AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Terry McCormickCT D02 - North Region Materials Lab04/26/2018Terry McCormick
No
PSE, 3/4 HMA A, 1.0% lime, 15.0%rap, PG64-28pm Valero Benicia Info