Sample Record

Owner Lab

  • CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2018-04-11-6

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 211777
DEA: 04209504
EFIS: 0412000116
DIST-CO-RTE-PM04-MRN,SON-1-50.2/50.5,0.0/0.2
Award Date01/04/2017
Closeout Date10/21/2019
Work DescriptionREPLACE ESTERO BRIDGE AND REALIGN APPROACHING ROADWAY; Bridge No. 27-0121
Location DescriptionMARIN AND SONOMA COUNTIES NEAR VALLEY FORD FROM 0.4 MILE SOUTH OF ESTERO AMERICANO BRIDGE TO 0.2 MILE NORTH OF ESTERO AMERICANO BRIDGE
QA Service Level1 (Verified on 01/17/2017)

Sample Information

Sample Taken Date04/11/2018 Sample Unique Key6
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing04/17/2018
Sample typeQuality Assurance A brief description of the samplegalvanized fastener assemblies
The quantity of what the sample constitutes5400 From where was the sample collectedDistributor
First name of sampler or witnessed byEd Last name of sampler or witnessed byFleming
Title of samplerQAI Telephone number of samplerUnknown
Laboratory sample identificationUnknown Linked DIME Sample IDUnknown
The fabricator/manufacturer/facility namePortland Bolt Transportation Laboratory (TL) NumberUnknown
Inspector Lot Number from the Transportation Laboratory (TL) FormB10-123-18 Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)
Heat Number(s)NF1610259, 10411640, 10483100, 177972, DL17101381, 11722130, A54492 Nut Mfg. Lot Number(s)27534-177972, 391701C
Washer Mfg. Lot Number(s)7170584, 0118742 Bolt SpecificationA325
Bolt Length(s)17-1/2, 4-1/2, 5-1/2 Nut SpecificationA563
Washer SpecificationF436 FinishHDG
Diameter/Size7/8, 3/4 Bolt Mfg. Lot NumberNF1610257951, 10411640, 4459744, 762834
Rocap Test Requirement(s) Lubricant Requirements(s)

Submitted Tests

DIME Test IDTest MethodTester NameTesting LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2018-04-11-6-1ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)BrianCT HQ - Sacramento Structural Materials Testing Laboratory04/18/2018Brian
Yes
05/01/2018A325
2018-04-11-6-2ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)BrianCT HQ - Sacramento Structural Materials Testing Laboratory04/18/2018Brian
Yes
05/01/2018A325
2018-04-11-6-3ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)BrianCT HQ - Sacramento Structural Materials Testing Laboratory04/18/2018Brian
Yes
05/01/2018A325
2018-04-11-6-4ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)BrianCT HQ - Sacramento Structural Materials Testing Laboratory04/18/2018Brian
Yes
05/01/2018Nut Proof Load
2018-04-11-6-5ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)BrianCT HQ - Sacramento Structural Materials Testing Laboratory04/18/2018Brian
Yes
05/01/2018Nut Proof Load
2018-04-11-6-6ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Brian EwingCT HQ - Sacramento Structural Materials Testing Laboratory04/18/2018Brian Ewing
Yes
05/01/2018
2018-04-11-6-7ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Brian EwingCT HQ - Sacramento Structural Materials Testing Laboratory04/18/2018Brian Ewing
Yes
05/01/2018
2018-04-11-6-8ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Brian EwingCT HQ - Sacramento Structural Materials Testing Laboratory04/18/2018Brian Ewing
Yes
05/01/2018
2018-04-11-6-9ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Brian EwingCT HQ - Sacramento Structural Materials Testing Laboratory04/18/2018Brian Ewing
Yes
05/01/2018
2018-04-11-6-10ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Brian EwingCT HQ - Sacramento Structural Materials Testing Laboratory04/18/2018Brian Ewing
Yes
05/01/2018

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2018-04-11-6-1 ASTM F606-14a (Verified)
DIME Test ID: 2018-04-11-6-2 ASTM F606-14a (Verified)
DIME Test ID: 2018-04-11-6-3 ASTM F606-14a (Verified)
DIME Test ID: 2018-04-11-6-4 ASTM F606-14a (Verified)
DIME Test ID: 2018-04-11-6-5 ASTM F606-14a (Verified)
DIME Test ID: 2018-04-11-6-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-11-6-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-11-6-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-11-6-9 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-11-6-10 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-11-6-11 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-11-6-12 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-11-6-13 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-11-6-14 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-11-6-15 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-11-6-16 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-11-6-17 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-11-6-18 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-11-6-19 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-11-6-20 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-11-6-21 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-11-6-22 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-11-6-23 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-11-6-24 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-11-6-25 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-11-6-26 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-11-6-27 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-11-6-28 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-11-6-29 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-11-6-30 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-11-6-31 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-11-6-32 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-11-6-33 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-11-6-34 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-11-6-35 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-11-6-36 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-11-6-37 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-11-6-38 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-11-6-39 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-11-6-40 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-11-6-41 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-11-6-42 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-11-6-43 ASTM E18-15 (Verified)
DIME Test ID: 2018-04-11-6-44 ASTM E18-15 (Verified)
DIME Test ID: 2018-04-11-6-45 ASTM E18-15 (Verified)
DIME Test ID: 2018-04-11-6-46 ASTM E18-15 (Verified)
DIME Test ID: 2018-04-11-6-47 ASTM E18-15 (Verified)