Sample Record

Owner Lab

  • CT HQ - Sacramento Materials Management Branch Field Office

DIME Sample ID 2017-11-01-34

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 9999
DEA: 00000000
EFIS: 0000000000
COOP: 99999333399
MINOR: 333333
Permit Numbers: 555555 0400NRT0000
DIST-CO-RTE-PM03-SAC,OMG-888,99,80-0.6-0.6
Award DateNot set
Closeout DateNot set
Work DescriptionTHIS PROJECT RECORD WAS ADDED FOR DIME DEVELOPERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES.
Location DescriptionTHIS PROJECT RECORD WAS ADDED FOR DIME DEVELOPERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES.
QA Service Level1 (Verified on 04/05/2013)

Sample Information

Sample Taken Date11/01/2017 Sample Unique Key34
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing11/01/2017
Sample typeQuality Control A brief description of the samplefor JMF QC
The quantity of what the sample constitutes1 From where was the sample collectedManufacturer
First name of sampler or witnessed byDavid Last name of sampler or witnessed byPhong
Title of samplerUnknown Telephone number of samplerUnknown
Laboratory sample identificationUnknown Linked DIME Sample IDUnknown
The fabricator/manufacturer/facility nameMustang Transportation Laboratory (TL) NumberUnknown
Inspector Lot Number from the Transportation Laboratory (TL) FormUnknown Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeAsphalt Modifier Asphalt Modifier TypeNA
Asphalt Modifier Mix NumberNot set HMA PayNo

JMF Information

HMA Design IDJMF3512-2017-1-5202 Date Created12/22/2017
Submittal
Show (18)
JMF3511-6-2017-1 Submittal Authorized For Use| JMF3513-2017-1
JMF3511-6-2017-2 Submittal Completeness Review Failed| JMF3513-2017-2
JMF3511-6-2017-3 Submittal Authorized For Use| JMF3513-2017-3
JMF3511-6-2018-14 Submittal Accepted for Verification| JMF3513-2018-13
JMF3511-6-2018-15 Submittal Accepted for Verification| JMF3513-2018-14
JMF3511-6-2018-29 Submittal Completeness in Review| JMF3513-2018-28
JMF3511-6-2018-33 Submittal Accepted for Verification| JMF3513-2018-32
JMF3511-6-2018-53 Submittal Accepted for Verification| JMF3513-2019-52
JMF3511-6-2018-55 Submittal Completeness in Review| JMF3513-2019-54
JMF3511-6-2018-56 Submittal Accepted for Verification| JMF3513-2019-55
JMF3511-6-2018-57 Submittal Accepted for Verification| JMF3513-2019-56
JMF3511-6-2018-58 Submittal Accepted for Verification| JMF3513-2019-57
JMF3511-6-2019-132 Submittal Completeness in Review| JMF3513-2020-135
JMF3511-6-2020-166 Submittal Accepted for Verification| JMF3513-2020-166
JMF3511-6-2020-202 Submittal Accepted for Verification| JMF3513-2020-167
JMF3511-6-2020-278 Submittal Accepted for Verification| JMF3513-2021-21
JMF3511-6-2020-296 Submittal In Progress| JMF3513-2021-39
JMF3511-6-2021-49 Submittal Accepted for Verification| JMF3513-2023-6

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2017-11-01-34-1ASTM D445-14: Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) (Kinematic Viscosity)David Phong, CT HQ - Sacramento Materials Management Branch Field Office02/08/2018David Phong
Yes
02/08/2018
2017-11-01-34-2ASTM D92-12b: Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester (Flash Point)David Phong, CT HQ - Sacramento Materials Management Branch Field Office02/08/2018David Phong
Yes
02/08/2018
2017-11-01-34-3ASTM D2007-11: Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method (Clay Gel Absorption)David Phong, CT HQ - Sacramento Materials Management Branch Field Office02/08/2018David Phong
Yes
02/08/2018

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2017-11-01-34-1 ASTM D445-14 (Verified)
DIME Test ID: 2017-11-01-34-2 ASTM D92-12b (Verified)
DIME Test ID: 2017-11-01-34-3 ASTM D2007-11 (Verified)