Owner Lab
- CT QASI - Los Angeles Field Laboratory
DIME Sample ID 2018-02-02-7
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 208945
DEA: 07288604
EFIS: 0700021080
COOP: 074663 |
|---|
| DIST-CO-RTE-PM | 07-LA-710-6.0-9.4 |
|---|
| Award Date | 09/02/2011 |
|---|
| Closeout Date | Not set |
|---|
| Work Description | Gerald Desmond Bridge Replacement - A Design Build project. IQA samples will be selected by Port/Caltrans representatives and sent to Translab for testing. |
|---|
| Location Description | Port of Long Beach (District 7) |
|---|
| QA Service Level | 1 (Verified on 06/03/2013) |
|---|
Sample Information
| Sample Taken Date | 02/02/2018 |
Sample Unique Key | 7 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 02/12/2018 |
|---|
| Sample type | Independent Assurance |
A brief description of the sample | A325 Bolt assy |
|---|
| The quantity of what the sample constitutes | 1 lot |
From where was the sample collected | Job Site |
|---|
| First name of sampler or witnessed by | Russell |
Last name of sampler or witnessed by | Lynch |
|---|
| Title of sampler | |
Telephone number of sampler | |
|---|
| Laboratory sample identification | |
Linked DIME Sample ID | |
|---|
| The fabricator/manufacturer/facility name | Gerald Desmond Bridge |
Transportation Laboratory (TL) Number | |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | L96-023-18 |
Structure unique identifier | Not set |
|---|
| Structure name | Not set |
|---|
Material Information
| Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | 27194-10518550-RCSpecial |
|---|
| Heat Number(s) | 10518550
6214506105
174316 |
Nut Mfg. Lot Number(s) | 27200-6214506105 |
|---|
| Washer Mfg. Lot Number(s) | D4996 |
Bolt Specification | A325 |
|---|
| Bolt Length(s) | 3 3/4 |
Nut Specification | A563 DH |
|---|
| Washer Specification | F436 |
Finish | Mechanically Galvanized |
|---|
| Diameter/Size | 1" |
Bolt Mfg. Lot Number | 27194-10518550 |
|---|
| Rocap Test Requirement(s) | |
Lubricant Requirements(s) | |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2018-02-02-7-1 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge) | Fred | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/20/2018 | Fred | Yes | 02/28/2018 | A325 TC |
|
| 2018-02-02-7-2 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load) | Brian | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/20/2018 | Brian | Yes | 02/28/2018 | Nut Proof |
|
| 2018-02-02-7-3 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/20/2018 | Fred Saylor | Yes | 02/28/2018 | |
|
| 2018-02-02-7-4 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/20/2018 | Fred Saylor | Yes | 02/28/2018 | |
|
| 2018-02-02-7-5 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/20/2018 | Fred Saylor | Yes | 02/28/2018 | |
|
| 2018-02-02-7-6 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/20/2018 | Fred Saylor | Yes | 02/28/2018 | |
|
| 2018-02-02-7-7 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/20/2018 | Fred Saylor | Yes | 02/28/2018 | |
|
| 2018-02-02-7-8 | ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/20/2018 | Fred Saylor | Yes | 02/28/2018 | |
|
4113441150412034120541206412074121041212
