Sample Record
Owner Lab
- CT HQ - Sacramento Materials Management Branch Field Office
DIME Sample ID 2018-01-12-1
Project Information
Project Identifiers | Project ID: 99999 DEA: 0322222 |
---|---|
DIST-CO-RTE-PM | 03-SAC,OMG-888,99,80-0.6-0.6 |
Award Date | Not set |
Closeout Date | Not set |
Work Description | THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES. |
Location Description | THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES. |
QA Service Level | (Verified on 04/05/2013) |
Sample Information
Sample Taken Date | 01/12/2018 | Sample Unique Key | 1 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 01/12/2018 |
Sample type | Department Acceptance | A brief description of the sample | Hot mix asphalt in boxes |
The quantity of what the sample constitutes | 100 | From where was the sample collected | Job Site |
First name of sampler or witnessed by | Pete | Last name of sampler or witnessed by | Spector |
Title of sampler | Sr TE | Telephone number of sampler | 916-227-7306 |
Laboratory sample identification | D76544 | Linked DIME Sample ID | 123456 |
The fabricator/manufacturer/facility name | Graniterock quarry | Transportation Laboratory (TL) Number | 123 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | 45678 | Structure unique identifier | Not set |
Structure name | Not set |
Material Information
Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
---|---|---|---|
HMA Grading | 3/4 inch | Lot number | Not set |
Sublot number | Not set | HMA Mix Number | Not set |
HMA Pay | No |
JMF Information
Verification ID | JMF3513-2017-6 | Date Created | 12/22/2017 |
---|---|---|---|
JMF Submittal ID | JMF3511-186-2017-9 | JMF Status | Submittal Authorized For Use |
Producer Mix ID | Not set | Authorized Date | 03/13/2018 |
Submitted Tests
DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
---|---|---|---|---|---|---|---|---|
2018-01-12-1-2 | AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void) | Peter Spector, CT - Unassigned/General Field Laboratory | 01/12/2018 | Peter Spector | No | Info | ||
2018-01-12-1-4 | AASHTO T329-13: Standard Method of Test for Moisture Content of Asphalt Mixtures by Oven Method (Moisture Content) | Peter Spector, CT - Unassigned/General Field Laboratory | 01/12/2018 | Peter Spector | No | Info | ||
2018-01-12-1-5 | AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void) | Peter Spector, CT - Unassigned/General Field Laboratory | 01/12/2018 | Peter Spector | No | Info | ||
2018-01-12-1-9 | AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content) | Peter Spector, CT - Unassigned/General Field Laboratory | 01/12/2018 | Peter Spector | No | JMF target value at a minimum should be tied to these binder content test results for future statistical analysis for potential changes to spec. . | Info | |
2018-01-12-1-10 | AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track) | Bob Scott, CT HQ - Sacramento Materials Management Branch Field Office | 11/12/2018 | Bob Scott | No | Info |
Sample File Attachments
File Name | Extension | Date Uploaded | Actions |
---|---|---|---|
No results found. |
Test File Attachments
DIME Test ID: 2018-01-12-1-2 AASHTO T269-14
DIME Test ID: 2018-01-12-1-4 AASHTO T329-13
DIME Test ID: 2018-01-12-1-5 AASHTO T269-14
DIME Test ID: 2018-01-12-1-9 AASHTO T308-10
DIME Test ID: 2018-01-12-1-10 AASHTO T324-14