Sample Record

Owner Lab

  • CT - Unassigned/General Field Laboratory

DIME Sample ID 2017-12-28-1

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 211848
DEA: 112T2174
EFIS: 1116000131
DIST-CO-RTE-PM11-SD-5-R37.4 - R46.5
Award Date12/22/2016
Closeout DateNot set
Work Description(Alternative Delivery) CMGC, San Elijo Highway Bridge Replacement. Replace the San Elijo lagoon highway bridge, construct HOV lanes, construct bike and pedestrian trails and bridge, build multi-use facility at Manchester Ave.
Location DescriptionIN SAN DIEGO COUNTY IN SOLANA BEACH AND ENCINITAS FROM 0.1 MILE NORTH OF LOMAS SANTA FE DRIVE OVERCROSSING TO 0.2 MILE SOUTH OF BIRMINGHAM DRIVE OVERCROSSING
QA Service Level1 (Verified on 01/31/2017)

Sample Information

Sample Taken Date12/28/2017 Sample Unique Key1
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing12/29/2017
Sample typeQuality Assurance A brief description of the sampleQA samples
The quantity of what the sample constitutes12 From where was the sample collectedFabricator
First name of sampler or witnessed bySubramony Last name of sampler or witnessed byKrishnamoorthy
Title of samplerQAI Telephone number of sampler9514366777
Laboratory sample identificationunknown Linked DIME Sample IDUnknown
The fabricator/manufacturer/facility nameTNT Rebar Transportation Laboratory (TL) NumberUnknown
Inspector Lot Number from the Transportation Laboratory (TL) FormL88-047-17 Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeSMTL TM5 - Welded Hoops Production or Authorization TestingProduction Testing
Service or UltimateUltimate Rebar Heat Number(s)65028912-02
Hoop Manufacturer Lot Number(s)1,4 and 10 Material Standard CodeASTM A706
Material Grade60 Rebar Size7
Diameter of Hoop5'-5" Epoxy CoatedNo
Epoxy Coating ColorNA Rebar ManufacturerGerdau
Welding CompanyTNT Rebar Coating StandardsUncoated
Weld TypeFlash Welded

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2017-12-28-1-1CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Tensile)Brian, CT HQ - Sacramento Structural Materials Testing Laboratory01/03/2018Brian
Yes
01/11/2018Bar Broke; OK Necking
2017-12-28-1-2CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Tensile)Brian, CT HQ - Sacramento Structural Materials Testing Laboratory01/03/2018Brian
Yes
01/11/2018Bar Broke; OK Necking
2017-12-28-1-3CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Tensile)Brian, CT HQ - Sacramento Structural Materials Testing Laboratory01/03/2018Brian
Yes
01/11/2018Bar Broke at Weld
2017-12-28-1-4CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Tensile)Brian, CT HQ - Sacramento Structural Materials Testing Laboratory01/03/2018Brian
Yes
01/11/2018Bar Broke; OK Necking
2017-12-28-1-5CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Tensile)Brian, CT HQ - Sacramento Structural Materials Testing Laboratory01/03/2018Brian
Yes
01/11/2018Bar Broke at Weld
2017-12-28-1-6CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Tensile)Brian, CT HQ - Sacramento Structural Materials Testing Laboratory01/03/2018Brian
Yes
01/11/2018Bar Broke; OK Necking
2017-12-28-1-7CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Tensile)Brian, CT HQ - Sacramento Structural Materials Testing Laboratory01/03/2018Brian
Yes
01/11/2018Bar Broke; OK Necking
2017-12-28-1-8CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Tensile)Brian, CT HQ - Sacramento Structural Materials Testing Laboratory01/03/2018Brian
Yes
01/11/2018Bar Broke; OK Necking
2017-12-28-1-9CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Tensile)Brian, CT HQ - Sacramento Structural Materials Testing Laboratory01/03/2018Brian
Yes
01/11/2018Bar Broke at Weld
2017-12-28-1-10CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Tensile)Brian, CT HQ - Sacramento Structural Materials Testing Laboratory01/03/2018Brian
Yes
01/11/2018Bar Broke; OK Necking

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2017-12-28-1-1 CTM 670-December 2013 (Verified)
DIME Test ID: 2017-12-28-1-2 CTM 670-December 2013 (Verified)
DIME Test ID: 2017-12-28-1-3 CTM 670-December 2013 (Verified)
DIME Test ID: 2017-12-28-1-4 CTM 670-December 2013 (Verified)
DIME Test ID: 2017-12-28-1-5 CTM 670-December 2013 (Verified)
DIME Test ID: 2017-12-28-1-6 CTM 670-December 2013 (Verified)
DIME Test ID: 2017-12-28-1-7 CTM 670-December 2013 (Verified)
DIME Test ID: 2017-12-28-1-8 CTM 670-December 2013 (Verified)
DIME Test ID: 2017-12-28-1-9 CTM 670-December 2013 (Verified)
DIME Test ID: 2017-12-28-1-10 CTM 670-December 2013 (Verified)
DIME Test ID: 2017-12-28-1-11 CTM 670-December 2013 (Verified)
DIME Test ID: 2017-12-28-1-12 CTM 670-December 2013 (Verified)