Sample Record
Owner Lab
- CT HQ - QAM Sacramento Field Laboratory
DIME Sample ID 2017-12-19-1
Sample is locked from editing. info
Project Information
Project Identifiers | Project ID: 99999 DEA: 0322222 |
---|---|
DIST-CO-RTE-PM | 03-SAC,OMG-888,99,80-0.6-0.6 |
Award Date | Not set |
Closeout Date | Not set |
Work Description | THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES. |
Location Description | THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES. |
QA Service Level | (Verified on 04/05/2013) |
Sample Information
Sample Taken Date | 12/19/2017 | Sample Unique Key | 1 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 12/19/2017 |
Sample type | Quality Control | A brief description of the sample | Aggregate gradation |
The quantity of what the sample constitutes | TEST Quantity | From where was the sample collected | Other |
First name of sampler or witnessed by | TEST First | Last name of sampler or witnessed by | TEST Last |
Title of sampler | TEST Sampler | Telephone number of sampler | 6268566190 |
Laboratory sample identification | Lab 326120 | Linked DIME Sample ID | TEST DIME ID |
The fabricator/manufacturer/facility name | Reliance - Irwindale | Transportation Laboratory (TL) Number | TL 326120 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | TEST TL | Structure unique identifier | Not set |
Structure name | Not set |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 326120 Source ID |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | TEST Fab Name | The fabricator/manufacturer designation for the sample | TEST Fab Designation |
The plant number | TEST Plant Number | A detailed description of where the material sample was collected | Aggregate |
Where the material sample would have been placed if not sampled | TEST Material Sample | Primary Aggregate Nominal Size | 1/2 inch |
The concrete mix design number | TEST Concrete ID | Lot number | Not set |
Sublot number | Not set | Aggregate Mix Number | Not set |
JMF Information
HMA Design ID | JMF3512-2017-9 | Date Created | 12/19/2017 |
---|---|---|---|
Submittal | JMF3511-186-2017-6 Submittal Accepted for Verification JMF3511-186-2018-10 Submittal In Progress| JMF3513-2018-9 |
Submitted Tests
DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
---|---|---|---|---|---|---|---|---|
2017-12-19-1-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Clinton Edmiston, CT HQ - QAM Sacramento Field Laboratory | 12/19/2017 | Clinton Edmiston | Yes | 12/26/2017 | ||
2017-12-19-1-2 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Clinton Edmiston, CT HQ - QAM Sacramento Field Laboratory | 12/19/2017 | Clinton Edmiston | Yes | 12/26/2017 | ||
2017-12-19-1-3 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Clinton Edmiston, CT HQ - QAM Sacramento Field Laboratory | 12/19/2017 | Clinton Edmiston | Yes | 12/26/2017 | ||
2017-12-19-1-4 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Clinton Edmiston, CT HQ - QAM Sacramento Field Laboratory | 12/19/2017 | Clinton Edmiston | Yes | 12/26/2017 | ||
2017-12-19-1-5 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Clinton Edmiston, CT HQ - QAM Sacramento Field Laboratory | 12/19/2017 | Clinton Edmiston | Yes | 12/26/2017 | ||
2017-12-19-1-6 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Clinton Edmiston, CT HQ - QAM Sacramento Field Laboratory | 12/19/2017 | Clinton Edmiston | Yes | 12/26/2017 | ||
2017-12-19-1-7 | CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index) | Clinton Edmiston, CT HQ - QAM Sacramento Field Laboratory | 12/19/2017 | Clinton Edmiston | No | Info | ||
2017-12-19-1-8 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Clinton Edmiston, CT HQ - QAM Sacramento Field Laboratory | 12/19/2017 | Clinton Edmiston | Yes | 12/26/2017 | ||
2017-12-19-1-9 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Clinton Edmiston, CT HQ - QAM Sacramento Field Laboratory | 12/19/2017 | Clinton Edmiston | Yes | 12/26/2017 |
Sample File Attachments
File Name | Extension | Date Uploaded | Actions |
---|---|---|---|
No results found. |
Test File Attachments
DIME Test ID: 2017-12-19-1-1 AASHTO T27-14 (Verified)
DIME Test ID: 2017-12-19-1-2 AASHTO T335-09r13 (Verified)
DIME Test ID: 2017-12-19-1-3 AASHTO T96-02r10 (Verified)
DIME Test ID: 2017-12-19-1-4 AASHTO T176-08 (Verified)
DIME Test ID: 2017-12-19-1-5 AASHTO T304-11 (Verified)
DIME Test ID: 2017-12-19-1-6 ASTM D4791-10 (Verified)
DIME Test ID: 2017-12-19-1-7 CTM 204-June 2010
DIME Test ID: 2017-12-19-1-8 AASHTO T85-13 (Verified)
DIME Test ID: 2017-12-19-1-9 AASHTO T84-14 (Verified)