Owner Lab
- CT QAM - Sacramento Field Laboratory
DIME Sample ID 2017-12-18-13
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 99999
DEA: 0322222 |
|---|
| DIST-CO-RTE-PM | 03-SAC,OMG-888,99,80-0.6-0.6 |
|---|
| Award Date | Not set |
|---|
| Closeout Date | Not set |
|---|
| Work Description | THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES. |
|---|
| Location Description | THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES. |
|---|
| QA Service Level | (Verified on 04/05/2013) |
|---|
Sample Information
| Sample Taken Date | 12/18/2017 |
Sample Unique Key | 13 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 12/18/2017 |
|---|
| Sample type | Verification |
A brief description of the sample | TEST |
|---|
| The quantity of what the sample constitutes | TEST |
From where was the sample collected | Other |
|---|
| First name of sampler or witnessed by | TEST |
Last name of sampler or witnessed by | TEST |
|---|
| Title of sampler | TEST |
Telephone number of sampler | Unknown |
|---|
| Laboratory sample identification | Unknown |
Linked DIME Sample ID | Unknown |
|---|
| The fabricator/manufacturer/facility name | TEST |
Transportation Laboratory (TL) Number | Unknown |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown |
Structure unique identifier | Not set |
|---|
| Structure name | Not set |
|---|
Material Information
| Material Type | Aggregate |
Source Identification (SMARA or name of Pit) | TEST |
|---|
| The fabricator's/manufacturer's product name for the sample | Unknown |
The fabricator/manufacturer designation for the sample | Unknown |
|---|
| The plant number | Unknown |
A detailed description of where the material sample was collected | TEST |
|---|
| Where the material sample would have been placed if not sampled | Unknown |
Primary Aggregate Nominal Size | 1/2 inch |
|---|
| The concrete mix design number | Unknown |
Lot number | Not set |
|---|
| Sublot number | Not set |
JMF Verification ID | JMF3513-2017-4 |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2017-12-18-13-1 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Clinton Edmiston | CT QAM - Sacramento Field Laboratory | 12/18/2017 | Clinton Edmiston | Yes | 12/25/2017 | |
|
| 2017-12-18-13-2 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Clinton Edmiston | CT QAM - Sacramento Field Laboratory | 12/18/2017 | Clinton Edmiston | Yes | 12/25/2017 | |
|
| 2017-12-18-13-3 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Clinton Edmiston | CT QAM - Sacramento Field Laboratory | 12/18/2017 | Clinton Edmiston | Yes | 12/25/2017 | |
|
| 2017-12-18-13-4 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Clinton Edmiston | CT QAM - Sacramento Field Laboratory | 12/18/2017 | Clinton Edmiston | Yes | 12/25/2017 | |
|
| 2017-12-18-13-5 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Clinton Edmiston | CT QAM - Sacramento Field Laboratory | 12/18/2017 | Clinton Edmiston | Yes | 12/25/2017 | |
|
| 2017-12-18-13-6 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Clinton Edmiston | CT QAM - Sacramento Field Laboratory | 12/18/2017 | Clinton Edmiston | Yes | 12/25/2017 | |
|
| 2017-12-18-13-7 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Clinton Edmiston | CT QAM - Sacramento Field Laboratory | 12/19/2017 | Clinton Edmiston | Yes | 12/26/2017 | |
|
| 2017-12-18-13-8 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Clinton Edmiston | CT QAM - Sacramento Field Laboratory | 12/19/2017 | Clinton Edmiston | Yes | 12/26/2017 | |
|
| 2017-12-18-13-9 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Clinton Edmiston | CT QAM - Sacramento Field Laboratory | 12/19/2017 | Clinton Edmiston | Yes | 12/26/2017 | |
|
| 2017-12-18-13-10 | CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index) | Clinton Edmiston | CT QAM - Sacramento Field Laboratory | 12/19/2017 | Clinton Edmiston | Yes | 12/26/2017 | |
|
38771387723877338774387753877638788387893879038791
