Sample Record

Owner Lab

  • CT HQ - QAM Sacramento Field Laboratory

DIME Sample ID 2017-12-18-4

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 99999
DEA: 0322222
DIST-CO-RTE-PM03-SAC,OMG-888,99,80-0.6-0.6
Award DateNot set
Closeout DateNot set
Work DescriptionTHIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES.
Location DescriptionTHIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES.
QA Service Level (Verified on 04/05/2013)

Sample Information

Sample Taken Date12/18/2017 Sample Unique Key4
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing12/18/2017
Sample typeQuality Control A brief description of the sampleTEST
The quantity of what the sample constitutesTEST From where was the sample collectedOther
First name of sampler or witnessed byTEST Last name of sampler or witnessed byTEST
Title of samplerUnknown Telephone number of samplerUnknown
Laboratory sample identificationUnknown Linked DIME Sample IDUnknown
The fabricator/manufacturer/facility nameReliance - Irwindale Transportation Laboratory (TL) NumberGH
Inspector Lot Number from the Transportation Laboratory (TL) FormTEST Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-19-0018
The fabricator's/manufacturer's product name for the sampleReliance - Irwindale The fabricator/manufacturer designation for the sampleReliance - Irwindale
The plant number6258566190 A detailed description of where the material sample was collectedReliance - Irwindale
Where the material sample would have been placed if not sampledUnknown Primary Aggregate Nominal Size1/2 inch
The concrete mix design numberUnknown Lot numberNot set
Sublot numberNot set Aggregate Mix NumberNot set

JMF Information

HMA Design IDJMF3512-2017-8 Date Created12/18/2017
SubmittalJMF3511-186-2017-5 Submittal Accepted for Verification| JMF3513-2017-5

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2017-12-18-4-1AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)Clinton Edmiston, CT HQ - QAM Sacramento Field Laboratory12/18/2017Clinton Edmiston
Yes
12/25/2017
2017-12-18-4-2AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Clinton Edmiston, CT HQ - QAM Sacramento Field Laboratory12/18/2017Clinton Edmiston
Yes
12/25/2017
2017-12-18-4-3AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Clinton Edmiston, CT HQ - QAM Sacramento Field Laboratory12/18/2017Clinton Edmiston
Yes
12/25/2017
2017-12-18-4-4AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Clinton Edmiston, CT HQ - QAM Sacramento Field Laboratory12/18/2017Clinton Edmiston
Yes
12/25/2017
2017-12-18-4-5AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Clinton Edmiston, CT HQ - QAM Sacramento Field Laboratory12/18/2017Clinton Edmiston
Yes
12/25/2017
2017-12-18-4-6ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Clinton Edmiston, CT HQ - QAM Sacramento Field Laboratory12/18/2017Clinton Edmiston
Yes
12/25/2017
2017-12-18-4-7CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index)Clinton Edmiston, CT HQ - QAM Sacramento Field Laboratory12/18/2017Clinton Edmiston
Yes
12/25/2017
2017-12-18-4-8AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)Clinton Edmiston, CT HQ - QAM Sacramento Field Laboratory12/18/2017Clinton Edmiston
Yes
12/25/2017
2017-12-18-4-9AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)Clinton Edmiston, CT HQ - QAM Sacramento Field Laboratory12/18/2017Clinton Edmiston
Yes
12/25/2017

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2017-12-18-4-1 AASHTO T27-14 (Verified)
DIME Test ID: 2017-12-18-4-2 AASHTO T335-09r13 (Verified)
DIME Test ID: 2017-12-18-4-3 AASHTO T96-02r10 (Verified)
DIME Test ID: 2017-12-18-4-4 AASHTO T176-08 (Verified)
DIME Test ID: 2017-12-18-4-5 AASHTO T304-11 (Verified)
DIME Test ID: 2017-12-18-4-6 ASTM D4791-10 (Verified)
DIME Test ID: 2017-12-18-4-7 CTM 204-June 2010 (Verified)
DIME Test ID: 2017-12-18-4-8 AASHTO T85-13 (Verified)
DIME Test ID: 2017-12-18-4-9 AASHTO T84-14 (Verified)