DIME - Sample Record for DIME Sample ID 2017-09-19-4

DIME » All Projects » Project - DEA: 04209504 » Sample 2017-09-19-4 » Sample Details

Sample Record

Owner Lab

CT HQ - QASI Bay Area Field Office

DIME Sample ID 2017-09-19-4

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 211777 DEA: 04209504 EFIS: 0412000116
DIST-CO-RTE-PM	04-MRN,SON-1-50.2/50.5,0.0/0.2
Award Date	01/04/2017
Closeout Date	10/21/2019
Work Description	REPLACE ESTERO BRIDGE AND REALIGN APPROACHING ROADWAY; Bridge No. 27-0121
Location Description	MARIN AND SONOMA COUNTIES NEAR VALLEY FORD FROM 0.4 MILE SOUTH OF ESTERO AMERICANO BRIDGE TO 0.2 MILE NORTH OF ESTERO AMERICANO BRIDGE
QA Service Level	1 (Verified on 01/17/2017)

Sample Information

Sample Taken Date	09/19/2017	Sample Unique Key	4
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	09/20/2017
Sample type	Quality Assurance	A brief description of the sample	Heavy Hex Bolt Assys
The quantity of what the sample constitutes	162 each lot	From where was the sample collected	Distributor
First name of sampler or witnessed by	Stacey	Last name of sampler or witnessed by	Davis
Title of sampler	QAI	Telephone number of sampler	5624806984
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	Bay Bolt	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form	B362-112-17	Structure unique identifier	Not set
Structure name	Not set

Material Information

Material Type	SMTL TM3 - Fastener Assembly	Rocap Number(s)	5479-01, 5479-02
Heat Number(s)	CR10411640, NF14103195	Nut Mfg. Lot Number(s)	383614C for both
Washer Mfg. Lot Number(s)	0217-445 both	Bolt Specification	ASTM A325 Hex
Bolt Length(s)	4.5, 5.5	Nut Specification	ASTM F563-07
Washer Specification	ASTM F436-19	Finish	HDG
Diameter/Size	3/4 for both	Bolt Mfg. Lot Number	762834, 352808A
Rocap Test Requirement(s)	yes	Lubricant Requirements(s)	yes

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2017-09-19-4-1	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	09/20/2017	Brian	Yes	09/28/2017	A325
2017-09-19-4-2	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	09/20/2017	Brian	Yes	09/28/2017	A325
2017-09-19-4-3	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	09/20/2017	Brian	Yes	09/28/2017	Nut Proof Load
2017-09-19-4-4	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	09/20/2017	Brian	Yes	09/28/2017	Nut Proof Load
2017-09-19-4-5	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	09/21/2017	Brian Ewing	Yes	09/28/2017
2017-09-19-4-6	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	09/21/2017	Brian Ewing	Yes	09/28/2017
2017-09-19-4-7	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	09/21/2017	Brian Ewing	Yes	09/28/2017
2017-09-19-4-8	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	09/21/2017	Brian Ewing	Yes	09/28/2017
2017-09-19-4-9	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	09/21/2017	Brian Ewing	Yes	09/28/2017
2017-09-19-4-10	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	09/21/2017	Brian Ewing	Yes	09/28/2017

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2017-09-19-4-1 ASTM F606-14a (Verified)
DIME Test ID: 2017-09-19-4-2 ASTM F606-14a (Verified)
DIME Test ID: 2017-09-19-4-3 ASTM F606-14a (Verified)
DIME Test ID: 2017-09-19-4-4 ASTM F606-14a (Verified)
DIME Test ID: 2017-09-19-4-5 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-09-19-4-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-09-19-4-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-09-19-4-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-09-19-4-9 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-09-19-4-10 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-09-19-4-11 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-09-19-4-12 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-09-19-4-13 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-09-19-4-14 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-09-19-4-15 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-09-19-4-16 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-19-4-17 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-19-4-18 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-19-4-19 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-19-4-20 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-19-4-21 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-19-4-22 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-19-4-23 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-19-4-24 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-19-4-25 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-19-4-26 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-19-4-27 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-19-4-28 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-19-4-29 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-19-4-30 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-19-4-31 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-19-4-32 ASTM E18-15 (Verified)
DIME Test ID: 2017-09-19-4-33 ASTM E18-15 (Verified)
DIME Test ID: 2017-09-19-4-34 ASTM E18-15 (Verified)