Owner Lab
- CT HQ - Sacramento Structural Materials Testing Laboratory
DIME Sample ID 2017-09-13-1
Sample is locked from editing. info
Project Information
Project Identifiers | Project ID: 211967 DEA: 101E8904 EFIS: 1016000093 |
DIST-CO-RTE-PM | 10-SJ-5-26.5/27.0 |
Award Date | 03/02/2017 |
Closeout Date | 01/24/2020 |
Work Description | REPAIR BRIDGE CROSSFRAMES. |
Location Description | SAN JOAQUIN COUNTY IN STOCKTON AT STOCKTON CHANNEL VIADUCT |
QA Service Level | 1 (Verified on 07/24/2017) |
Sample Information
Sample Taken Date | 09/13/2017 |
Sample Unique Key | 1 |
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 09/15/2017 |
Sample type | Quality Assurance |
A brief description of the sample | A325 Bolts |
The quantity of what the sample constitutes | 34 |
From where was the sample collected | Distributor |
First name of sampler or witnessed by | Kevin |
Last name of sampler or witnessed by | Churchill |
Title of sampler | ASI |
Telephone number of sampler | 510-693-3545 |
Laboratory sample identification | Unknown |
Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | Cordova Bolt |
Transportation Laboratory (TL) Number | Unknown |
Inspector Lot Number from the Transportation Laboratory (TL) Form | L02-062-17 |
Structure unique identifier | Not set |
Structure name | Not set |
---|
Material Information
Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | 304 17 04 |
Heat Number(s) | DL16100849 |
Nut Mfg. Lot Number(s) | 385053B |
Washer Mfg. Lot Number(s) | 0317 495 |
Bolt Specification | A325 |
Bolt Length(s) | 3-1/2 |
Nut Specification | A563 DH |
Washer Specification | F1554 |
Finish | HDG |
Diameter/Size | 1" |
Bolt Mfg. Lot Number | 378562A |
Rocap Test Requirement(s) | |
Lubricant Requirements(s) | yes |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
2017-09-13-1-1 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge) | Brian | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/19/2017 | Brian | Yes | 09/27/2017 | A325 | |
2017-09-13-1-2 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load) | Brian | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/19/2017 | Brian | Yes | 09/27/2017 | Nut Proof | |
2017-09-13-1-3 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/19/2017 | Brian Ewing | Yes | 09/27/2017 | | |
2017-09-13-1-4 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/19/2017 | Brian Ewing | Yes | 09/27/2017 | | |
2017-09-13-1-5 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/19/2017 | Brian Ewing | Yes | 09/27/2017 | | |
2017-09-13-1-6 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/19/2017 | Brian Ewing | Yes | 09/27/2017 | | |
2017-09-13-1-7 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/19/2017 | Brian Ewing | Yes | 09/27/2017 | | |
2017-09-13-1-8 | ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/19/2017 | Brian Ewing | Yes | 09/27/2017 | | |
3355133568336373363833639336403364133642