DIME - Sample Record for DIME Sample ID 2017-09-06-1

DIME » All Projects » Project - DEA: SMTL-STOCK » Sample 2017-09-06-1 » Sample Details

Sample Record

Owner Lab

CT HQ - QASI Sacramento Field Office

DIME Sample ID 2017-09-06-1

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 88888 DEA: SMTL-STOCK EFIS: SMTL-STOCK
DIST-CO-RTE-PM	59---
Award Date	Not set
Closeout Date	Not set
Work Description	Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location Description	Not set
QA Service Level	NOT VERIFIED

Sample Information

Sample Taken Date	09/06/2017	Sample Unique Key	1
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	09/06/2017
Sample type	Quality Assurance	A brief description of the sample	nuts and all thread
The quantity of what the sample constitutes	27 pieces	From where was the sample collected	Fabricator
First name of sampler or witnessed by	Scott	Last name of sampler or witnessed by	Leavitt
Title of sampler	QA Inspector	Telephone number of sampler	5105900116
Laboratory sample identification	Unknown	Linked DIME Sample ID	Unknown
The fabricator/manufacturer/facility name	Universal Industrial Sales	Transportation Laboratory (TL) Number	Unknown
Inspector Lot Number from the Transportation Laboratory (TL) Form	S28-252-17	Structure unique identifier	Not set
Structure name	Not set

Material Information

Material Type	SMTL TM3 - Fastener Assembly	Rocap Number(s)
Heat Number(s)	DL16105095, DL14102883	Nut Mfg. Lot Number(s)	Unytite, Dyson
Washer Mfg. Lot Number(s)		Bolt Specification	A449
Bolt Length(s)	12	Nut Specification	A563-DH
Washer Specification	N/A	Finish	hdg, hdg
Diameter/Size	5/8	Bolt Mfg. Lot Number	30143-B, 30143
Rocap Test Requirement(s)	NR	Lubricant Requirements(s)	Dyson only

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2017-09-06-1-1	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	09/12/2017	Brian	Yes	09/21/2017	Nut Proof Load
2017-09-06-1-2	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	09/12/2017	Brian	Yes	09/21/2017	Nut Proof Load
2017-09-06-1-3	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	09/12/2017	Brian	Yes	09/21/2017	Nut Proof Load
2017-09-06-1-4	ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	09/12/2017	Brian	Yes	09/21/2017	A449 Threaded Rod
2017-09-06-1-5	ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	09/12/2017	Brian	Yes	09/21/2017	A449 Threaded Rod
2017-09-06-1-6	ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	09/12/2017	Brian	Yes	09/21/2017	A449 Threaded Rod
2017-09-06-1-7	ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	09/12/2017	Brian	Yes	09/21/2017	Loop Failure
2017-09-06-1-8	ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	09/12/2017	Brian	Yes	09/21/2017	A449 Threaded Rod
2017-09-06-1-9	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	09/14/2017	Brian Ewing	Yes	09/21/2017
2017-09-06-1-10	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	09/14/2017	Brian Ewing	Yes	09/21/2017

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2017-09-06-1-1 ASTM F606-14a (Verified)
DIME Test ID: 2017-09-06-1-2 ASTM F606-14a (Verified)
DIME Test ID: 2017-09-06-1-3 ASTM F606-14a (Verified)
DIME Test ID: 2017-09-06-1-4 ASTM F606-14 (Verified)
DIME Test ID: 2017-09-06-1-5 ASTM F606-14 (Verified)
DIME Test ID: 2017-09-06-1-6 ASTM F606-14 (Verified)
DIME Test ID: 2017-09-06-1-7 ASTM F606-14 (Verified)
DIME Test ID: 2017-09-06-1-8 ASTM F606-14 (Verified)
DIME Test ID: 2017-09-06-1-9 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-06-1-10 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-06-1-11 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-06-1-12 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-06-1-13 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-06-1-14 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-06-1-15 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-06-1-16 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-06-1-17 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-06-1-18 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-06-1-19 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-06-1-20 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-06-1-21 ASTM E18-15 (Verified)
DIME Test ID: 2017-09-06-1-22 ASTM E18-15 (Verified)
DIME Test ID: 2017-09-06-1-23 ASTM E18-15 (Verified)
DIME Test ID: 2017-09-06-1-24 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-09-06-1-25 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-09-06-1-26 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-09-06-1-27 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-09-06-1-28 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-09-06-1-29 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-06-1-30 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-06-1-31 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-06-1-32 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-06-1-33 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-06-1-34 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-09-06-1-35 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-09-06-1-36 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-09-06-1-37 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-09-06-1-38 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-09-06-1-39 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-06-1-40 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-06-1-41 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-06-1-42 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-06-1-43 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-06-1-44 ASTM F606-14a (Verified)
DIME Test ID: 2017-09-06-1-45 ASTM F606-14a (Verified)
DIME Test ID: 2017-09-06-1-46 ASTM F606-14a (Verified)