Sample Record

Owner Lab

  • CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2017-08-18-2

Project Information

Project IdentifiersProject ID: 211988
DEA: 081C5104
EFIS: 0812000324
DIST-CO-RTE-PM08-RIV-74-17.4/17.8
Award Date03/09/2017
Closeout Date06/23/2021
Work DescriptionCONSTRUCT VEHICLE RINSE FACILITY
Location DescriptionRIVERSIDE COUNTY IN AND NEAR LAKE ELSINORE AT THE ELSINORE MAINTENANCE STATION AND FROM DEXTER AVENUE TO CONRAD AVENUE
QA Service Level1 (Verified on 08/08/2017)

Sample Information

Sample Taken Date08/18/2017 Sample Unique Key2
Will the laboratory/organization for which you are a member perform testing on this material sample?No Date that the sample was received by the laboratory/organization performing the testing08/29/2017
Sample typeQuality Assurance A brief description of the sample3/4 x 1-3/4 A325 TC Bolt assy
The quantity of what the sample constitutes220 From where was the sample collectedFabricator
First name of sampler or witnessed byRussell Last name of sampler or witnessed byLynch
Title of samplerQAI Telephone number of sampler(213) 538-8219
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameRichardson Steel Transportation Laboratory (TL) NumberC939704
Inspector Lot Number from the Transportation Laboratory (TL) FormL96-132-17 Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)
Heat Number(s)20479960 Bolt 62142530 Nut 11606800 Washer Nut Mfg. Lot Number(s)
Washer Mfg. Lot Number(s)D2268 Bolt SpecificationA325
Bolt Length(s)1-3/4 Nut SpecificationA563
Washer SpecificationF436 FinishMG
Diameter/Size3/4 Bolt Mfg. Lot Number
Rocap Test Requirement(s) Lubricant Requirements(s)

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2017-08-18-2-1ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)Brian, CT HQ - Sacramento Structural Materials Testing Laboratory08/30/2017Brian
Yes
09/12/2017Nut Proof Load
2017-08-18-2-2ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)Brian, CT HQ - Sacramento Structural Materials Testing Laboratory08/30/2017Brian
Yes
09/12/2017Nut Proof Load
2017-08-18-2-3ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)Brian, CT HQ - Sacramento Structural Materials Testing Laboratory08/30/2017Brian
Yes
09/12/2017Nut Proof Load
2017-08-18-2-4ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory08/31/2017Brian Ewing
Yes
09/12/2017
2017-08-18-2-5ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory08/31/2017Brian Ewing
Yes
09/12/2017
2017-08-18-2-6ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory08/31/2017Brian Ewing
Yes
09/12/2017
2017-08-18-2-7ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory08/31/2017Brian Ewing
Yes
09/12/2017
2017-08-18-2-8ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory08/31/2017Brian Ewing
Yes
09/12/2017
2017-08-18-2-9ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory08/31/2017Brian Ewing
Yes
09/12/2017
2017-08-18-2-10ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory08/31/2017Brian Ewing
Yes
09/12/2017

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2017-08-18-2-1 ASTM F606-14a (Verified)
DIME Test ID: 2017-08-18-2-2 ASTM F606-14a (Verified)
DIME Test ID: 2017-08-18-2-3 ASTM F606-14a (Verified)
DIME Test ID: 2017-08-18-2-4 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-18-2-5 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-18-2-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-18-2-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-18-2-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-18-2-9 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-18-2-10 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-18-2-11 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-18-2-12 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-18-2-13 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-18-2-14 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-18-2-15 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-18-2-16 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-18-2-17 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-18-2-18 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-18-2-19 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-18-2-20 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-18-2-21 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-18-2-22 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-18-2-23 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-18-2-24 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-18-2-25 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-18-2-26 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-18-2-27 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-18-2-28 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-18-2-29 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-18-2-30 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-18-2-31 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-18-2-32 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-18-2-33 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-18-2-34 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-18-2-35 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-18-2-36 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-18-2-37 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-18-2-38 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-18-2-39 ASTM E18-15 (Verified)
DIME Test ID: 2017-08-18-2-40 ASTM E18-15 (Verified)
DIME Test ID: 2017-08-18-2-41 ASTM E18-15 (Verified)
DIME Test ID: 2017-08-18-2-42 ASTM E18-15 (Verified)
DIME Test ID: 2017-08-18-2-43 ASTM E18-15 (Verified)
DIME Test ID: 2017-08-18-2-44 ASTM E18-15 (Verified)
DIME Test ID: 2017-08-18-2-45 ASTM E18-15 (Verified)
DIME Test ID: 2017-08-18-2-46 ASTM E18-15 (Verified)