DIME - Sample Record for DIME Sample ID 2017-08-18-1

DIME » All Projects » Project - DEA: 081C5104 » Sample 2017-08-18-1 » Sample Details

Sample Record

Owner Lab

CT HQ - QASI Los Angeles Field Office

DIME Sample ID 2017-08-18-1

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 211988 DEA: 081C5104 EFIS: 0812000324
DIST-CO-RTE-PM	08-RIV-74-17.4/17.8
Award Date	03/09/2017
Closeout Date	06/23/2021
Work Description	CONSTRUCT VEHICLE RINSE FACILITY
Location Description	RIVERSIDE COUNTY IN AND NEAR LAKE ELSINORE AT THE ELSINORE MAINTENANCE STATION AND FROM DEXTER AVENUE TO CONRAD AVENUE
QA Service Level	1 (Verified on 08/08/2017)

Sample Information

Sample Taken Date	08/18/2017	Sample Unique Key	1
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	08/29/2017
Sample type	Quality Assurance	A brief description of the sample	7/8 x 2-3/4 A325 TC Bolt assy
The quantity of what the sample constitutes	50	From where was the sample collected	Fabricator
First name of sampler or witnessed by	Russell	Last name of sampler or witnessed by	Lynch
Title of sampler	QAI	Telephone number of sampler	(213) 538-8219
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	Richardson Steel	Transportation Laboratory (TL) Number	C939703
Inspector Lot Number from the Transportation Laboratory (TL) Form	L96-131-17	Structure unique identifier	Not set
Structure name	Not set

Material Information

Material Type	SMTL TM3 - Fastener Assembly	Rocap Number(s)
Heat Number(s)	20468400 Bolt 75063667 Nut 41542750 Washer	Nut Mfg. Lot Number(s)
Washer Mfg. Lot Number(s)		Bolt Specification	A325
Bolt Length(s)	2-3/4	Nut Specification	A563
Washer Specification	F436	Finish	MG
Diameter/Size	7/8	Bolt Mfg. Lot Number	4440771
Rocap Test Requirement(s)		Lubricant Requirements(s)

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2017-08-18-1-1	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	08/30/2017	Brian	Yes	09/07/2017	Nut Proof Load
2017-08-18-1-2	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	08/30/2017	Brian	Yes	09/07/2017	Nut Proof Load
2017-08-18-1-3	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	08/31/2017	Brian Ewing	Yes	09/07/2017
2017-08-18-1-4	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	08/31/2017	Brian Ewing	Yes	09/07/2017
2017-08-18-1-5	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	08/31/2017	Brian Ewing	Yes	09/07/2017
2017-08-18-1-6	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	08/31/2017	Brian Ewing	Yes	09/07/2017
2017-08-18-1-7	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	08/31/2017	Brian Ewing	Yes	09/07/2017
2017-08-18-1-8	ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	08/31/2017	Brian Ewing	Yes	09/07/2017
2017-08-18-1-9	ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	08/31/2017	Brian Ewing	Yes	09/07/2017
2017-08-18-1-10	ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	08/31/2017	Brian Ewing	Yes	09/07/2017

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2017-08-18-1-1 ASTM F606-14a (Verified)
DIME Test ID: 2017-08-18-1-2 ASTM F606-14a (Verified)
DIME Test ID: 2017-08-18-1-3 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-18-1-4 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-18-1-5 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-18-1-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-18-1-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-18-1-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-18-1-9 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-18-1-10 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-18-1-11 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-18-1-12 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-18-1-13 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-18-1-14 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-18-1-15 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-18-1-16 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-18-1-17 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-18-1-18 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-18-1-19 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-18-1-20 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-18-1-21 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-18-1-22 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-18-1-23 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-18-1-24 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-18-1-25 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-18-1-26 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-18-1-27 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-18-1-28 ASTM E18-15 (Verified)
DIME Test ID: 2017-08-18-1-29 ASTM E18-15 (Verified)
DIME Test ID: 2017-08-18-1-30 ASTM E18-15 (Verified)
DIME Test ID: 2017-08-18-1-31 ASTM E18-15 (Verified)
DIME Test ID: 2017-08-18-1-32 ASTM E18-15 (Verified)
DIME Test ID: 2017-08-18-1-33 ASTM E18-15 (Verified)