Sample Record

Owner Lab

  • CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2017-08-08-9

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 88888
DEA: STOCK
EFIS: STOCK
DIST-CO-RTE-PM59---
Award DateNot set
Closeout DateNot set
Work DescriptionSpecial project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location DescriptionNot set
QA Service LevelNOT VERIFIED

Sample Information

Sample Taken Date08/08/2017 Sample Unique Key9
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing08/11/2017
Sample typeQuality Assurance A brief description of the sampleFastener Assembly
The quantity of what the sample constitutes8 From where was the sample collectedFabricator
First name of sampler or witnessed byAmy Last name of sampler or witnessed byBihary
Title of samplerUnknown Telephone number of samplerUnknown
Laboratory sample identificationUnknown Linked DIME Sample IDUnknown
The fabricator/manufacturer/facility nameHodell-Natco Nucor Transportation Laboratory (TL) NumberUnknown
Inspector Lot Number from the Transportation Laboratory (TL) FormN/A Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)501714 503941
Heat Number(s)Dl16101278 754945 NF16101521 745662 NF16101754 273283 Nut Mfg. Lot Number(s)383381C 754937
Washer Mfg. Lot Number(s)0217-464 764707 Bolt SpecificationA325 HDG
Bolt Length(s)1.5" 6" Nut SpecificationA563 HDG
Washer SpecificationF436 HDG FinishHDG
Diameter/Size1/2-13 5/8-11 Bolt Mfg. Lot Number381262A 44105
Rocap Test Requirement(s) Lubricant Requirements(s)

Submitted Tests

DIME Test IDTest MethodTester NameTesting LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2017-08-08-9-1ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)BrianCT HQ - Sacramento Structural Materials Testing Laboratory08/16/2017Brian
Yes
08/24/2017A449 Bolt
2017-08-08-9-2ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)BrianCT HQ - Sacramento Structural Materials Testing Laboratory08/16/2017Brian
Yes
08/24/2017Nut Proof Load
2017-08-08-9-3ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Brian EwingCT HQ - Sacramento Structural Materials Testing Laboratory08/16/2017Brian Ewing
Yes
08/24/2017
2017-08-08-9-4ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Brian EwingCT HQ - Sacramento Structural Materials Testing Laboratory08/16/2017Brian Ewing
Yes
08/24/2017
2017-08-08-9-5ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Brian EwingCT HQ - Sacramento Structural Materials Testing Laboratory08/16/2017Brian Ewing
Yes
08/24/2017
2017-08-08-9-6ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Brian EwingCT HQ - Sacramento Structural Materials Testing Laboratory08/16/2017Brian Ewing
Yes
08/24/2017
2017-08-08-9-7ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Brian EwingCT HQ - Sacramento Structural Materials Testing Laboratory08/16/2017Brian Ewing
Yes
08/24/2017
2017-08-08-9-8ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Brian EwingCT HQ - Sacramento Structural Materials Testing Laboratory08/16/2017Brian Ewing
Yes
08/24/2017
2017-08-08-9-9ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Brian EwingCT HQ - Sacramento Structural Materials Testing Laboratory08/16/2017Brian Ewing
Yes
08/24/2017
2017-08-08-9-10ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Brian EwingCT HQ - Sacramento Structural Materials Testing Laboratory08/16/2017Brian Ewing
Yes
08/24/2017

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2017-08-08-9-1 ASTM F606-14 (Verified)
DIME Test ID: 2017-08-08-9-2 ASTM F606-14a (Verified)
DIME Test ID: 2017-08-08-9-3 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-08-9-4 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-08-9-5 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-08-9-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-08-9-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-08-9-8 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-08-9-9 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-08-9-10 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-08-9-11 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-08-9-12 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-08-9-13 ASTM E18-15 (Verified)
DIME Test ID: 2017-08-08-9-14 ASTM E18-15 (Verified)
DIME Test ID: 2017-08-08-9-15 ASTM E18-15 (Verified)
DIME Test ID: 2017-08-08-9-16 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-08-9-17 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-08-9-18 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-08-9-19 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-08-9-20 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-08-9-21 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-08-9-22 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-08-9-23 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-08-9-24 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-08-9-25 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-08-9-26 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-08-9-27 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-08-9-28 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-08-9-29 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-08-9-30 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-08-9-31 ASTM E18-15 (Verified)
DIME Test ID: 2017-08-08-9-32 ASTM E18-15 (Verified)