DIME - Sample Record for DIME Sample ID 2017-07-31-3

DIME » All Projects » Project - DEA: 09356104 » Sample 2017-07-31-3 » Sample Details

Sample Record

Owner Lab

CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2017-07-31-3

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 211800 DEA: 09356104 EFIS: 0912000044
DIST-CO-RTE-PM	09-MNO-395-34.1
Award Date	01/31/2017
Closeout Date	11/12/2019
Work Description	CONSTRUCT MAINTENANCE EQUIPMENT STORAGE BUILDING AND SITE WORK.
Location Description	BUILDING CONSTRUCTION ADJACENT TO STATE HIGHWAY IN MONO COUNTY AT CRESTVIEW AT THE CRESTVIEW SATELLITE MAINTENANCE STATION
QA Service Level	1 (Verified on 06/01/2017)

Sample Information

Sample Taken Date	07/31/2017	Sample Unique Key	3
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	08/01/2017
Sample type	Quality Assurance	A brief description of the sample	5/8 inch ATR
The quantity of what the sample constitutes	1 lot of 8	From where was the sample collected	Fabricator
First name of sampler or witnessed by	Stacey	Last name of sampler or witnessed by	Davis
Title of sampler	QAI	Telephone number of sampler	5624806984
Laboratory sample identification	Unknown	Linked DIME Sample ID	Unknown
The fabricator/manufacturer/facility name	Portland Bolt	Transportation Laboratory (TL) Number	Unknown
Inspector Lot Number from the Transportation Laboratory (TL) Form	Unknown	Structure unique identifier	Not set
Structure name	Not set

Material Information

Material Type	SMTL TM3 - Fastener Assembly	Rocap Number(s)	N/A
Heat Number(s)	PL15107101	Nut Mfg. Lot Number(s)	24293-75064046
Washer Mfg. Lot Number(s)	N/A	Bolt Specification	A1554, grade 36
Bolt Length(s)	4"	Nut Specification	A563, grade DH
Washer Specification	not required	Finish	HDG
Diameter/Size	5/8	Bolt Mfg. Lot Number	N/A
Rocap Test Requirement(s)		Lubricant Requirements(s)	none

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2017-07-31-3-1	ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	08/04/2017	Fred	Yes	08/11/2017	F1554 Stud & Nut
2017-07-31-3-2	ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	08/04/2017	Fred	Yes	08/11/2017	F1554 Stud & Nut
2017-07-31-3-3	ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	08/04/2017	Fred	Yes	08/11/2017	F1554 Stud & Nut
2017-07-31-3-4	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	08/04/2017	Fred Saylor	Yes	08/11/2017
2017-07-31-3-5	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	08/04/2017	Fred Saylor	Yes	08/11/2017
2017-07-31-3-6	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	08/04/2017	Fred Saylor	Yes	08/11/2017
2017-07-31-3-7	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	08/04/2017	Fred Saylor	Yes	08/11/2017
2017-07-31-3-8	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	08/04/2017	Fred Saylor	Yes	08/11/2017
2017-07-31-3-9	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	08/04/2017	Fred Saylor	Yes	08/11/2017
2017-07-31-3-10	ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	08/04/2017	Fred Saylor	Yes	08/11/2017

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2017-07-31-3-1 ASTM F606-14 (Verified)
DIME Test ID: 2017-07-31-3-2 ASTM F606-14 (Verified)
DIME Test ID: 2017-07-31-3-3 ASTM F606-14 (Verified)
DIME Test ID: 2017-07-31-3-4 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-07-31-3-5 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-07-31-3-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-07-31-3-7 ASTM B499-14 (Verified)
DIME Test ID: 2017-07-31-3-8 ASTM B499-14 (Verified)
DIME Test ID: 2017-07-31-3-9 ASTM B499-14 (Verified)
DIME Test ID: 2017-07-31-3-10 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-07-31-3-11 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-07-31-3-12 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-07-31-3-13 ASTM B499-14 (Verified)
DIME Test ID: 2017-07-31-3-14 ASTM B499-14 (Verified)
DIME Test ID: 2017-07-31-3-15 ASTM B499-14 (Verified)