Sample Record

Owner Lab

  • CT HQ - Sacramento Aggregate Testing Laboratory

DIME Sample ID 2017-06-15-11

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 88888
DEA: SMTL-STOCK
EFIS: SMTL-STOCK
DIST-CO-RTE-PM59---
Award DateNot set
Closeout DateNot set
Work DescriptionSpecial project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location DescriptionNot set
QA Service LevelNOT VERIFIED

Sample Information

Sample Taken Date06/15/2017 Sample Unique Key11
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing06/16/2017
Sample typeInformational A brief description of the sampleLightweight Aggregate
The quantity of what the sample constitutes6 bags From where was the sample collectedManufacturer
First name of sampler or witnessed byJackie Last name of sampler or witnessed byWong
Title of samplerSMR Telephone number of samplerUnknown
Laboratory sample identification17CPCC-0211 Linked DIME Sample IDUnknown
The fabricator/manufacturer/facility nameBlue Planet Aggregate Transportation Laboratory (TL) Numberna
Inspector Lot Number from the Transportation Laboratory (TL) FormUnknown Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)Blue Planet LW Uncoated
The fabricator's/manufacturer's product name for the sampleUnknown The fabricator/manufacturer designation for the sampleUnknown
The plant numberUnknown A detailed description of where the material sample was collectedStockpile
Where the material sample would have been placed if not sampledUnknown Primary Aggregate Nominal Size3/8 inch
The concrete mix design numberUnknown Lot numberNot set
Sublot numberNot set Aggregate Mix NumberNot set

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2017-06-15-11-1CTM 214-August 2010: Method of Test for Soundness of Aggregates by Use of Sodium SulfateBenjamin Lenz, CT HQ - Sacramento Aggregate Testing Laboratory07/21/2017Benjamin Lenz
Yes
07/24/2017
2017-06-15-11-2CTM 213-December 2012: Method of Test for Organic Impurities in Concrete SandBenjamin Lenz, CT HQ - Sacramento Aggregate Testing Laboratory07/24/2017Benjamin Lenz
Yes
07/24/2017
2017-06-15-11-4CTM 202-Oct 2014: Method of Test for Determining Sieve Analysis of Fine and Coarse AggregatesBenjamin Lenz, CT HQ - Sacramento Aggregate Testing Laboratory07/24/2017Benjamin Lenz
Yes
07/24/2017
2017-06-15-11-5CTM 211-May 2010: Abrasion of Coarse Aggregate by Use of the Los Angeles Abrasion Testing MachineBenjamin Lenz, CT HQ - Sacramento Aggregate Testing Laboratory07/24/2017Benjamin Lenz
Yes
07/24/2017LART was run with an alternate grading, 2500g 1/2 x 3/8, and 2500g 3/8 x #4. Sphere count and weight was per Grading C.
2017-06-15-11-6CTM 226-July 2010: Method of Test for Determination of Moisture Content of Soils and Aggregates by Oven DryingBenjamin Lenz, CT HQ - Sacramento Aggregate Testing Laboratory07/24/2017Benjamin Lenz
Yes
07/24/2017

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2017-06-15-11-1 CTM 214-August 2010 (Verified)
DIME Test ID: 2017-06-15-11-2 CTM 213-December 2012 (Verified)
DIME Test ID: 2017-06-15-11-4 CTM 202-Oct 2014 (Verified)
DIME Test ID: 2017-06-15-11-5 CTM 211-May 2010 (Verified)
DIME Test ID: 2017-06-15-11-6 CTM 226-July 2010 (Verified)