Owner Lab
- CT HQ - Sacramento Structural Materials Testing Laboratory
DIME Sample ID 2017-06-23-12
Sample is locked from editing. info
Project Information
Project Identifiers | Project ID: 8196 DEA: 59912684 |
DIST-CO-RTE-PM | 59--- |
Award Date | Not set |
Closeout Date | Not set |
Work Description | |
Location Description | |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 06/23/2017 |
Sample Unique Key | 12 |
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 06/28/2017 |
Sample type | Quality Assurance |
A brief description of the sample | A325 Bolts |
The quantity of what the sample constitutes | 3 |
From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Mike |
Last name of sampler or witnessed by | Hasler |
Title of sampler | Unknown |
Telephone number of sampler | Unknown |
Laboratory sample identification | Unknown |
Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | Ameron International |
Transportation Laboratory (TL) Number | NA |
Inspector Lot Number from the Transportation Laboratory (TL) Form | NA |
Structure unique identifier | Not set |
Structure name | Not set |
---|
Material Information
Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | |
Heat Number(s) | |
Nut Mfg. Lot Number(s) | |
Washer Mfg. Lot Number(s) | |
Bolt Specification | A325 |
Bolt Length(s) | 3.5" |
Nut Specification | NA |
Washer Specification | NA |
Finish | HDG |
Diameter/Size | 1.5" |
Bolt Mfg. Lot Number | 47570-1 |
Rocap Test Requirement(s) | |
Lubricant Requirements(s) | |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
2017-06-23-12-1 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 07/05/2017 | Brian Ewing | Yes | 07/13/2017 | | |
2017-06-23-12-2 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 07/05/2017 | Brian Ewing | Yes | 07/13/2017 | | |
2017-06-23-12-3 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 07/05/2017 | Brian Ewing | Yes | 07/13/2017 | | |
2017-06-23-12-4 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 07/05/2017 | Brian Ewing | Yes | 07/13/2017 | | |
2017-06-23-12-5 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 07/05/2017 | Brian Ewing | Yes | 07/13/2017 | | |
2017-06-23-12-6 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 07/05/2017 | Brian Ewing | Yes | 07/13/2017 | | |
2017-06-23-12-7 | ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 07/05/2017 | Brian Ewing | Yes | 07/13/2017 | | |
2017-06-23-12-8 | ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 07/05/2017 | Brian Ewing | Yes | 07/13/2017 | | |
2897028971289722897328974289752897628977