DIME - Sample Record for DIME Sample ID 2017-05-08-2

DIME » All Projects » Project - DEA: 083555V4 » Sample 2017-05-08-2 » Sample Details

Sample Record

Owner Lab

CT HQ - QASI Sacramento Field Office

DIME Sample ID 2017-05-08-2

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 210569 DEA: 083555V4 EFIS: 0814000086
DIST-CO-RTE-PM	08-SBD-15-42.5/46.0
Award Date	11/05/2015
Closeout Date	01/18/2022
Work Description	WIDEN I-15, RECONSTRUCT 3 IC'S, CONSTRUCT 2 NEW BR AND WIDEN 3 BR.
Location Description	SAN BERNARDINO COUNTY IN VICTORVILLE FROM 0.5 MILE NORTH OF MOJAVE DRIVE TO 1.5 MILE NORTH OF STODDARD WELLS ROAD OVERCROSSING
QA Service Level	1 (Verified on 10/15/2015)

Sample Information

Sample Taken Date	05/08/2017	Sample Unique Key	2
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	05/11/2017
Sample type	Department Acceptance	A brief description of the sample	A325 TC Bolts 1x3 1x4
The quantity of what the sample constitutes	874.142	From where was the sample collected	Fabricator
First name of sampler or witnessed by	Kevin	Last name of sampler or witnessed by	Muser
Title of sampler	QA	Telephone number of sampler	916-799-3391
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	CK Johnson	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form	S19-131-17	Structure unique identifier	Not set
Structure name	Not set

Material Information

Material Type	SMTL TM3 - Fastener Assembly	Rocap Number(s)	378870A, 382078A
Heat Number(s)	DL16100848, DL16100843	Nut Mfg. Lot Number(s)	371124B, 369069B
Washer Mfg. Lot Number(s)	030427, 030427	Bolt Specification	A325
Bolt Length(s)	3", 4"	Nut Specification	563 DH
Washer Specification	F436	Finish	MG, MG
Diameter/Size	1"x3", 1"x4"	Bolt Mfg. Lot Number	378850A, 382040A
Rocap Test Requirement(s)		Lubricant Requirements(s)

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2017-05-08-2-1	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	05/16/2017	Fred	Yes	05/26/2017	A325
2017-05-08-2-2	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	05/16/2017	Fred	Yes	05/26/2017	A325
2017-05-08-2-3	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	05/16/2017	Fred	Yes	05/26/2017	A325
2017-05-08-2-4	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	05/16/2017	Fred	Yes	05/26/2017	A563
2017-05-08-2-5	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	05/16/2017	Fred	Yes	05/26/2017	A563
2017-05-08-2-6	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	05/16/2017	Fred	Yes	05/26/2017	A863
2017-05-08-2-7	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Arnold Viken, CT HQ - Sacramento Structural Materials Testing Laboratory	05/18/2017	Arnold Viken	Yes	05/26/2017
2017-05-08-2-8	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Arnold Viken, CT HQ - Sacramento Structural Materials Testing Laboratory	05/18/2017	Arnold Viken	Yes	05/26/2017
2017-05-08-2-9	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Arnold Viken, CT HQ - Sacramento Structural Materials Testing Laboratory	05/18/2017	Arnold Viken	Yes	05/26/2017
2017-05-08-2-10	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Arnold Viken, CT HQ - Sacramento Structural Materials Testing Laboratory	05/18/2017	Arnold Viken	Yes	05/26/2017

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2017-05-08-2-1 ASTM F606-14a (Verified)
DIME Test ID: 2017-05-08-2-2 ASTM F606-14a (Verified)
DIME Test ID: 2017-05-08-2-3 ASTM F606-14a (Verified)
DIME Test ID: 2017-05-08-2-4 ASTM F606-14a (Verified)
DIME Test ID: 2017-05-08-2-5 ASTM F606-14a (Verified)
DIME Test ID: 2017-05-08-2-6 ASTM F606-14a (Verified)
DIME Test ID: 2017-05-08-2-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-05-08-2-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-05-08-2-9 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-05-08-2-10 ASTM B499-14 (Verified)
DIME Test ID: 2017-05-08-2-11 ASTM B499-14 (Verified)
DIME Test ID: 2017-05-08-2-12 ASTM B499-14 (Verified)
DIME Test ID: 2017-05-08-2-13 ASTM B499-14 (Verified)
DIME Test ID: 2017-05-08-2-14 ASTM B499-14 (Verified)
DIME Test ID: 2017-05-08-2-15 ASTM B499-14 (Verified)
DIME Test ID: 2017-05-08-2-16 ASTM B499-14 (Verified)
DIME Test ID: 2017-05-08-2-17 ASTM B499-14 (Verified)
DIME Test ID: 2017-05-08-2-18 ASTM B499-14 (Verified)
DIME Test ID: 2017-05-08-2-19 ASTM B499-14 (Verified)
DIME Test ID: 2017-05-08-2-20 ASTM B499-14 (Verified)
DIME Test ID: 2017-05-08-2-21 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-05-08-2-22 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-05-08-2-23 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-05-08-2-24 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-05-08-2-25 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-05-08-2-26 ASTM B499-14 (Verified)
DIME Test ID: 2017-05-08-2-27 ASTM B499-14 (Verified)
DIME Test ID: 2017-05-08-2-28 ASTM B499-14 (Verified)
DIME Test ID: 2017-05-08-2-29 ASTM B499-14 (Verified)
DIME Test ID: 2017-05-08-2-30 ASTM B499-14 (Verified)
DIME Test ID: 2017-05-08-2-31 ASTM B499-14 (Verified)
DIME Test ID: 2017-05-08-2-32 ASTM B499-14 (Verified)
DIME Test ID: 2017-05-08-2-33 ASTM B499-14 (Verified)
DIME Test ID: 2017-05-08-2-34 ASTM B499-14 (Verified)
DIME Test ID: 2017-05-08-2-35 ASTM B499-14 (Verified)
DIME Test ID: 2017-05-08-2-36 ASTM E18-15 (Verified)
DIME Test ID: 2017-05-08-2-37 ASTM E18-15 (Verified)
DIME Test ID: 2017-05-08-2-38 ASTM E18-15 (Verified)