DIME - Sample Record for DIME Sample ID 2017-04-13-6

DIME » All Projects » Project - EFIS: 0000001155 » Sample 2017-04-13-6 » Sample Details

Sample Record

Owner Lab

CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2017-04-13-6

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 212152 EFIS: 0000001155 Permit Numbers: 11166SI0579
DIST-CO-RTE-PM	11--78-12.9/12.9
Award Date	09/12/2016
Closeout Date	08/07/2018
Work Description	enter upon State Highway right of way in San Diego County, City of San Marcos, on Route 78, at post mile12.91, to place temporary traffic control to relocate an existing overhead sign and to install traffic signal outside Caltrans right of way, as shown on the attached plans, in accordance with the
Location Description	ROUTE 78, SAN MARCOS
QA Service Level	1 (Verified on 04/06/2017)

Sample Information

Sample Taken Date	04/13/2017	Sample Unique Key	6
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	04/17/2017
Sample type	Quality Assurance	A brief description of the sample	F1554 Grade 55 HDG Anchor Bolts
The quantity of what the sample constitutes	3	From where was the sample collected	Distributor
First name of sampler or witnessed by	Greg	Last name of sampler or witnessed by	Johnston
Title of sampler	Unknown	Telephone number of sampler	Unknown
Laboratory sample identification	Unknown	Linked DIME Sample ID	Unknown
The fabricator/manufacturer/facility name	Portland Bolt	Transportation Laboratory (TL) Number	C953703
Inspector Lot Number from the Transportation Laboratory (TL) Form	L5308917	Structure unique identifier	Not set
Structure name	Not set

Material Information

Material Type	SMTL TM3 - Fastener Assembly	Rocap Number(s)
Heat Number(s)	511914	Nut Mfg. Lot Number(s)	DDTB
Washer Mfg. Lot Number(s)	9962G	Bolt Specification	F1554 G55 HDG
Bolt Length(s)	32	Nut Specification	A194/A563 HDG
Washer Specification	F436 HDG	Finish	F2329/A153
Diameter/Size	2.5	Bolt Mfg. Lot Number
Rocap Test Requirement(s)		Lubricant Requirements(s)

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date
2017-04-13-6-1	ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	04/19/2017	Brian	Yes	04/26/2017
2017-04-13-6-6	ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	04/19/2017	Fred Saylor	Yes	04/26/2017
2017-04-13-6-7	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	04/19/2017	Fred Saylor	Yes	04/26/2017
2017-04-13-6-8	ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	04/19/2017	Fred Saylor	Yes	04/26/2017
2017-04-13-6-9	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	04/19/2017	Fred Saylor	Yes	04/26/2017
2017-04-13-6-10	ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	04/19/2017	Fred Saylor	Yes	04/26/2017

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2017-04-13-6-1 ASTM A370-15 (Verified)
DIME Test ID: 2017-04-13-6-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-04-13-6-7 ASTM B499-14 (Verified)
DIME Test ID: 2017-04-13-6-8 ASTM E18-15 (Verified)
DIME Test ID: 2017-04-13-6-9 ASTM B499-14 (Verified)
DIME Test ID: 2017-04-13-6-10 ASTM E18-15 (Verified)