Sample Record

Owner Lab

  • CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2017-01-16-3

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 8196
DEA: 59912684
DIST-CO-RTE-PM59---
Award DateNot set
Closeout DateNot set
Work Description
Location Description
QA Service LevelNOT VERIFIED

Sample Information

Sample Taken Date01/16/2017 Sample Unique Key3
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing01/20/2017
Sample typeQuality Assurance A brief description of the sampleF1554 anchor rods
The quantity of what the sample constitutes3 From where was the sample collectedManufacturer
First name of sampler or witnessed byDaniel Last name of sampler or witnessed byReyes
Title of samplerUnknown Telephone number of samplerUnknown
Laboratory sample identificationUnknown Linked DIME Sample IDUnknown
The fabricator/manufacturer/facility nameA M Bolt Transportation Laboratory (TL) NumberUnknown
Inspector Lot Number from the Transportation Laboratory (TL) FormB30100117 Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)
Heat Number(s)3058949, PL15205107, 3063613 Nut Mfg. Lot Number(s)DDTO, DDSR, 19595-144419
Washer Mfg. Lot Number(s)294840, 275307, 299272 Bolt SpecificationASTM F1554
Bolt Length(s)36", 42", 36" Nut SpecificationASTM A194
Washer SpecificationASTM F436 FinishASTM A153/F2329 - Hot Dip
Diameter/Size1.5"x36", 1.75"x42", 1"x36" Bolt Mfg. Lot Number
Rocap Test Requirement(s) Lubricant Requirements(s)

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2017-01-16-3-3ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)Fred, CT HQ - Sacramento Structural Materials Testing Laboratory01/24/2017Fred
Yes
02/02/2017
2017-01-16-3-14ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Arnold Viken, CT HQ - Sacramento Structural Materials Testing Laboratory01/24/2017Arnold Viken
Yes
02/02/2017
2017-01-16-3-15ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Arnold Viken, CT HQ - Sacramento Structural Materials Testing Laboratory01/24/2017Arnold Viken
Yes
02/02/2017
2017-01-16-3-16ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Arnold Viken, CT HQ - Sacramento Structural Materials Testing Laboratory01/24/2017Arnold Viken
Yes
02/02/2017
2017-01-16-3-17ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Arnold Viken, CT HQ - Sacramento Structural Materials Testing Laboratory01/24/2017Arnold Viken
Yes
02/02/2017
2017-01-16-3-18ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Arnold Viken, CT HQ - Sacramento Structural Materials Testing Laboratory01/24/2017Arnold Viken
Yes
02/02/2017
2017-01-16-3-19ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Arnold Viken, CT HQ - Sacramento Structural Materials Testing Laboratory01/24/2017Arnold Viken
Yes
02/02/2017
2017-01-16-3-20ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Arnold Viken, CT HQ - Sacramento Structural Materials Testing Laboratory01/24/2017Arnold Viken
Yes
02/02/2017Not Supplied
2017-01-16-3-21ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Arnold Viken, CT HQ - Sacramento Structural Materials Testing Laboratory01/24/2017Arnold Viken
Yes
02/02/2017
2017-01-16-3-22ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)Arnold Viken, CT HQ - Sacramento Structural Materials Testing Laboratory01/24/2017Arnold Viken
Yes
02/02/2017

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2017-01-16-3-3 ASTM A370-15 (Verified)
DIME Test ID: 2017-01-16-3-14 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-01-16-3-15 ASTM B499-14 (Verified)
DIME Test ID: 2017-01-16-3-16 ASTM B499-14 (Verified)
DIME Test ID: 2017-01-16-3-17 ASTM B499-14 (Verified)
DIME Test ID: 2017-01-16-3-18 ASTM B499-14 (Verified)
DIME Test ID: 2017-01-16-3-19 ASTM B499-14 (Verified)
DIME Test ID: 2017-01-16-3-20 ASTM B499-14 (Verified)
DIME Test ID: 2017-01-16-3-21 ASTM B499-14 (Verified)
DIME Test ID: 2017-01-16-3-22 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-01-16-3-23 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-01-16-3-25 ASTM B499-14 (Verified)
DIME Test ID: 2017-01-16-3-26 ASTM B499-14 (Verified)
DIME Test ID: 2017-01-16-3-27 ASTM B499-14 (Verified)
DIME Test ID: 2017-01-16-3-28 ASTM E18-15 (Verified)
DIME Test ID: 2017-01-16-3-29 ASTM E18-15 (Verified)
DIME Test ID: 2017-01-16-3-30 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-01-16-3-31 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-01-16-3-32 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-01-16-3-33 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-01-16-3-35 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-01-16-3-36 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-01-16-3-37 ASTM B499-14 (Verified)
DIME Test ID: 2017-01-16-3-38 ASTM B499-14 (Verified)
DIME Test ID: 2017-01-16-3-39 ASTM B499-14 (Verified)
DIME Test ID: 2017-01-16-3-40 ASTM B499-14 (Verified)
DIME Test ID: 2017-01-16-3-41 ASTM B499-14 (Verified)
DIME Test ID: 2017-01-16-3-42 ASTM B499-14 (Verified)
DIME Test ID: 2017-01-16-3-43 ASTM B499-14 (Verified)
DIME Test ID: 2017-01-16-3-44 ASTM E18-15 (Verified)
DIME Test ID: 2017-01-16-3-45 ASTM E18-15 (Verified)
DIME Test ID: 2017-01-16-3-47 ASTM A370-15 (Verified)
DIME Test ID: 2017-01-16-3-48 ASTM A370-15 (Verified)
DIME Test ID: 2017-01-16-3-49 ASTM F606-14a (Verified)
DIME Test ID: 2017-01-16-3-50 ASTM F606-14a (Verified)