Sample Record
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
DIME Sample ID 2023-03-25-20
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 994426 DEA: 081F9804 EFIS: 0815000087 |
|---|---|
| DIST-CO-RTE-PM | 08-RIV-215-17.5 |
| Award Date | 01/03/2023 |
| Closeout Date | Not set |
| Work Description | I-215/Holland Road New BR OC (SOP) |
| Location Description | City of Menifee |
| QA Service Level | 2 (Verified on 12/07/2022) |
Sample Information
| Sample Taken Date | 03/25/2023 | Sample Unique Key | 20 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/14/2023 |
| Sample type | Verification | A brief description of the sample | JMF 1/2" HMA-A-SP R15 0.25% LAS |
| The quantity of what the sample constitutes | 4 Bags Of Agg., 3 Bags Of Rap | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Vulcan | Last name of sampler or witnessed by | QC |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 0205A-23 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Vulcan Materials | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-33-0027, 91-33-073 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Belt Cut at Vulcan Materials- Corona | |
| Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 1/2 inch |
| The concrete mix design number | 324108 CORD SJR | Lot number | |
| Sublot number | Aggregate Mix Number |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
|---|---|---|---|---|---|---|---|---|
| 2023-03-25-20-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Satish Jain/RG, CT D08 - Fontana Southern Regional Laboratory | 04/20/2023 | Satish Jain | Yes | 08/02/2023 | Combined Virgin Aggregate Gradation | |
| 2023-03-25-20-2 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory | 04/18/2023 | Satish Jain | Yes | 08/02/2023 | ||
| 2023-03-25-20-3 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory | 04/18/2023 | Satish Jain | Yes | 08/02/2023 | ||
| 2023-03-25-20-4 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Seige M, CT D08 - Fontana Southern Regional Laboratory | 04/24/2023 | Satish Jain | Yes | 08/02/2023 | ||
| 2023-03-25-20-5 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Larry Diaz, CT D08 - Fontana Southern Regional Laboratory | 04/25/2023 | Satish Jain | Yes | 08/02/2023 | ||
| 2023-03-25-20-6 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 04/26/2023 | Satish Jain | Yes | 08/02/2023 | ||
| 2023-03-25-20-7 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 04/26/2023 | Satish Jain | Yes | 08/02/2023 | ||
| 2023-03-25-20-8 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 04/26/2023 | Satish Jain | Yes | 08/02/2023 | ||
| 2023-03-25-20-9 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 04/26/2023 | Satish Jain | Yes | 08/02/2023 | Rap Gradation After Ignition | |
| 2023-03-25-20-10 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Satish Jain/RG, CT D08 - Fontana Southern Regional Laboratory | 04/26/2023 | Satish Jain | No | Comb. Agg. Gradation W/Rap Gradation Correlation Factors | Info |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2023-03-25-20-1 AASHTO T27-14 (Verified)
DIME Test ID: 2023-03-25-20-2 AASHTO T84-14 (Verified)
DIME Test ID: 2023-03-25-20-3 AASHTO T85-13 (Verified)
DIME Test ID: 2023-03-25-20-4 AASHTO T96-02r10 (Verified)
DIME Test ID: 2023-03-25-20-5 AASHTO T176-08 (Verified)
DIME Test ID: 2023-03-25-20-6 AASHTO T304-11 (Verified)
DIME Test ID: 2023-03-25-20-7 AASHTO T335-09r13 (Verified)
DIME Test ID: 2023-03-25-20-8 ASTM D4791-10 (Verified)
DIME Test ID: 2023-03-25-20-9 CTM 202-November 2011 (Verified)
DIME Test ID: 2023-03-25-20-10 CTM 202-November 2011