DIME » All Projects » Project - DEA: 010E0904 » Sample 2023-03-15-1 » Sample Details

Sample Record

Owner Lab

  • CT HQ - QASI Bay Area Field Office

DIME Sample ID 2023-03-15-1

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 993279
DEA: 010E0904
EFIS: 0113000123
DIST-CO-RTE-PM01-MEN-20-33.3/34.4
Award Date05/06/2022
Closeout DateNot set
Work DescriptionCONSTRUCT NEW BRIDGE, REMOVE TWO BRIDGES, EARTHWORK AND PAVING. (Bridge No. 10-0310)
Location DescriptionMENDOCINO COUNTY NEAR UKIAH FROM 0.3 MILE WEST OF RUSSIAN RIVER BRIDGE AND OVERHEAD TO 0.3 MILE EAST OF COUNTY ROAD 144
QA Service Level1 (Verified on 10/04/2021)

Sample Information

Sample Taken Date03/15/2023 Sample Unique Key1
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing03/21/2023
Sample typeQuality Control A brief description of the sample5/8x3-1/2 assembly
The quantity of what the sample constitutes55 From where was the sample collectedDistributor
First name of sampler or witnessed byOscar Last name of sampler or witnessed byVizcaino
Title of sampler Telephone number of sampler16787558969
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameSt Louis Screw and Bolt Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) FormB378-009-23 Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)TT0162967
Heat Number(s)10434800, 5804907405, 219376 and 10589380 Nut Mfg. Lot Number(s)36449-5804907405
Washer Mfg. Lot Number(s)19382 Bolt SpecificationA325-1
Bolt Length(s)3-1/2" Nut SpecificationA563-DH
Washer SpecificationF436-1, Steel 1060 FinishMech Galv.
Diameter/Size5/8" Bolt Mfg. Lot NumberM5478
Rocap Test Requirement(s) Lubricant Requirements(s)
Washer Inner Diameter(s)

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedDate AddedVerified?Release DateTest CommentsPrivacy LevelActions
2023-03-15-1-1ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)rmacias, CT HQ - Sacramento Structural Materials Testing Laboratory03/22/202303/22/2023
Yes
03/28/2023A325 Wedge TensilePublic - Test Data Visible
2023-03-15-1-2ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)<None>, CT HQ - Sacramento Structural Materials Testing Laboratory03/22/202303/22/2023
Yes
03/28/2023A563 Nut ProofPublic - Test Data Visible
2023-03-15-1-3ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory03/23/202303/23/2023
Yes
03/28/2023Public - Test Data Visible
2023-03-15-1-4ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory03/23/202303/23/2023
Yes
03/28/2023Public - Test Data Visible
2023-03-15-1-5ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory03/23/202303/23/2023
Yes
03/28/2023Public - Test Data Visible
2023-03-15-1-6ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory03/23/202303/23/2023
Yes
03/28/2023Public - Test Data Visible
2023-03-15-1-7ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory03/23/202303/23/2023
Yes
03/28/2023Public - Test Data Visible
2023-03-15-1-8ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory03/23/202303/23/2023
Yes
03/28/2023Public - Test Data Visible
2023-03-15-1-9ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory03/23/202303/23/2023
Yes
03/28/2023Public - Test Data Visible
2023-03-15-1-10ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory03/23/202303/23/2023
Yes
03/28/2023Public - Test Data Visible
Go to page:

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2023-03-15-1-1 ASTM F606-21 (Verified)
DIME Test ID: 2023-03-15-1-2 ASTM F606-21 (Verified)
DIME Test ID: 2023-03-15-1-3 ASME B1.2-83r17 (Verified)
DIME Test ID: 2023-03-15-1-4 ASME B1.2-83r17 (Verified)
DIME Test ID: 2023-03-15-1-5 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-03-15-1-6 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-03-15-1-7 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-03-15-1-8 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-03-15-1-9 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-03-15-1-10 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-03-15-1-11 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-03-15-1-12 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-03-15-1-13 ASTM E18-20 (Verified)
DIME Test ID: 2023-03-15-1-14 ASTM E18-20 (Verified)